Internet #100375313

Model # LSU26Z

Store SKU #208413

Store SO SKU #592854

0707392162506

LSU ZMAX Galvanized Adjustable Light Slopeable/Skewable U Hanger for 2x6 Nominal Lumber

  • Provides support underneath the joist, rafter or beam
  • Versatile hanger may be sloped or skewed
  • Field adjustable
$ 6 56

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

Deck Glamour Photo

Deck It Out

Strong decks bring beauty and entertaining space to your outdoor living area

Deck Glamour Photo

Make Your Deck Beautiful and Safe

Building a safe, strong deck starts with the proper connectors and fasteners

Photo of a deck being built

Deck Building Tips and Tricks

Installing corrosion-resistant connectors and fasteners helps extend the life of your deck

SDWH Screw being installed into ledger

Ledger connections critical for deck safety

Strong-Drive® SDWH Timber-Hex HDG screw delivers high-strength, wood-to-wood connectivity, such as deck ledger applications

DTT2Z guardrail install

Guardrail Installation Tips and Tricks

Don’t take chances with guardrail connections. DTT2Z deck tension ties fasten guardrails to deck framing.

DTT1Z install

Securing the Deck to the House

Install DTT1Z as a tension tie to meet building codes and eliminate the need to access to the floor joists inside the home

LSCZ install

Take the Step to Secure Deck Stairs

LSCZ adjustable stair-stringer connector offers a concealed connection between the stair stringer and the carrying header or rim board

Tight LUS26Z install shot

Joist Hangers

Provides bearing and uplift resistance

Tight H1 install shot

Hurricane Ties

Ideal for preventing lateral movement of joists

Tight SD screw install photo

SD Connector Screw

The only screw approved with Simpson Strong-Tie connectors

Tight install shot of LCEZ4

Post Caps

LCEZ end post caps provide a post-to-beam connection in new or retrofit deck applications

Tight PBSZ install photo

Post Base

Features a 1 in. standoff to resist wood decay

Stainless-steel connector product shot

Prevent Corrosion

Deck-Drive DWP stainless-steel fasteners are recommended for higher-exposure environments or applications

  • Provides support underneath the joist, rafter or beam
  • Versatile hanger may be sloped or skewed
  • Field adjustable
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. The LSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°.
  • This product is preferable to similar connectors because of easier installation, higher loads, and lower installed cost
  • Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members
  • Adjustments can be made in the field
  • Web stiffeners required for I-joist applications
  • Joist width: 1-1/2 in.
  • Made from 18-Gauge steel
  • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with 10d common and 10d x 1-1/2 in. nails
  • Shop all Simpson Strong-Tie here.

Product Overview

  • Provides support underneath the joist, rafter or beam
  • Versatile hanger may be sloped or skewed
  • Field adjustable
Model #: LSU26Z
Sku #: 208413
Internet #: 100375313

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field-skewable and slopeable options. The LSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°.

  • This product is preferable to similar connectors because of easier installation, higher loads, and lower installed cost
  • Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members
  • Adjustments can be made in the field
  • Web stiffeners required for I-joist applications
  • Joist width: 1-1/2 in.
  • Made from 18-Gauge steel
  • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with 10d common and 10d x 1-1/2 in. nails
  • Shop all Simpson Strong-Tie here.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Joist Hanger Size
2x6
Product Depth (in.)
7.75
Product Height (in.)
4
Product Width (in.)
4.563 in

Details

Connector Finish
G185 Galvanized
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Gauge
18
Hanger Flange Type
Other
Hanger Modifications
Adjustable,Sloped
Material
Steel
Number of Pieces
1
Package Quantity
1
Product Weight (lb.)
0.43lb
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
Yes

Specifications

Dimensions

Joist Hanger Size
2x6
Product Depth (in.)
7.75
Product Height (in.)
4
Product Width (in.)
4.563 in

Details

Connector Finish
G185 Galvanized
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Gauge
18
Hanger Flange Type
Other
Hanger Modifications
Adjustable,Sloped
Material
Steel
Number of Pieces
1
Package Quantity
1
Product Weight (lb.)
0.43lb
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
Yes

Questions & Answers

Simpson ZMAX 2x6 adjustable hangers.

Hello, we just bought this product because we've come to a point in our patio cover where there 2 angles, (they might be close to 45 degree angles, not quite sure). We tried looking up more info on how to adjust this product the way we need. Are there any tips? Tutorials available? Thank you.
Asked by: NessaMarie003
Take a scrap piece of wood and attach it. Then see if you angle is right. They are EZ to adjust, just bend it.
Answered by: BigCal
Date published: 2019-11-15

Can any of the Simpson Screws be used to install this joist hanger.

Can any of the Simpson Screws be used to install this joist hanger.
Asked by: xlowes
Yes or any #9 SD screw will work
Answered by: BigCal
Date published: 2019-11-15

Which structural screw will I need to replace nails? Thanks!

Asked by: anyamy
Use #9 SD screws
Answered by: BigCal
Date published: 2019-11-15

Can I use 2x4 with this product? Trying to build a ramp.

Asked by: Andrew
You could but it's over kill. They make hangers for 2 X 4 s.
Answered by: BigCal
Date published: 2019-11-15
  • y_2020, m_8, d_9, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_, sid_100375313, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT
Get Everything You Need
Get Everything You Need