Internet #205299328

Model #ZN25300

Zinc Nailon 1/4 in. x 3 in. Pin Drive Anchor (100-Pack)

  • Zinc Nailon anchor for static load applications
  • Low cost and easy to install
  • Optimal performance even in the most demanding applications
  • See More Details

Product Overview

Simpson Strong-Tie mechanical anchors are designed to install easily and securely into a variety of base materials, including concrete, grouted and hollow CMU and brick. Specifiers and contractors trust Simpson Strong-Tie anchors for optimum performance under the most demanding structural applications. Zinc Nailon anchors are low-cost anchors for light-duty applications under static loads.
  • Zinc-nailon anchor
  • Pin and head configuration make this anchor tamper resistant
  • Mushroom head
  • Quantity: 100
  • 1/4 in. x 3 in.
  • Die cast zinc alloy
  • Shop all Simpson Strong-Tie here.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Masonry & Concrete Anchors

Zinc Nailon 1/4 in. x 2-1/2 in. Pin Drive Anchor (100-Pack)
current product
Zinc Nailon 1/4 in. x 3 in. Pin Drive Anchor (100-Pack)
CSD 1/4 in. x 3 in. Mechanically Galvanized Split-Drive Anchors (100-Pack)DSD 1/4 in. x 3 in. Zinc-Plated Split-Drive Anchor
BrandSimpson Strong-TieSimpson Strong-TieSimpson Strong-TieSimpson Strong-Tie
NameZinc Nailon 1/4 in. x 2-1/2 in. Pin Drive Anchor (100-Pack)Zinc Nailon 1/4 in. x 3 in. Pin Drive Anchor (100-Pack)CSD 1/4 in. x 3 in. Mechanically Galvanized Split-Drive Anchors (100-Pack)DSD 1/4 in. x 3 in. Zinc-Plated Split-Drive Anchor
Price
$3517
/package
$4145
/package
$4379
/package
$4725
/package
Ratings
(6)
(6)
(5)
(0)
Fastener Length (in.)2.5333
Fastener Head StyleMushroomMushroomNo HeadNo Head
Fastener/Connector MaterialSteelSteelSteelSteel
Package Quantity100100100100
Maximum Weight Capacity (lb.)0.000.000.000.00
Finish FamilyZincZincOtherZinc
Anchor Diameter (in.)1/4"1/4"1/4"1/4"
Fastener TypeConcrete ScrewsConcrete ScrewsConcrete ScrewsConcrete Screws
View ProductView ProductView ProductView Product

Specifications

Dimensions

Anchor Diameter (in.)
1/4"
Anchor Length (in.)
3
Fastener Length (in.)
3
Required Drill Hole Size (in.)
0.25

Details

Color Family
Steel
Fastener Head Style
Mushroom
Fastener Plating
Zinc
Fastener Type
Concrete Screws
Fastener/Connector Material
Steel
Features
No Additional Features
Finish
Carbon Steel
Finish Family
Zinc
Included
No Additional Items Included
Interior/Exterior
Interior
Maximum Weight Capacity (lb.)
0.00
Measurement Standard
SAE
Package Quantity
100
Product Weight (lb.)
4.29
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
Limited Warranty

Questions & Answers

2Questions3Answers

How deep to drill into brick? Can you remove these from brick ?

Asked by Ed August 21, 2017
2
Answers

1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling. 2. Position fixture and insert Nailon anchor. 3. Tap with hammer until flush with fixture, then drive pin until flush with top of head. Answer #2 Book Answer: Concrete fasteners are designed to remain fixed in base material once they are set. Concrete and masonry fasteners are unique. They are placed into a drilled hole in concrete, brick or block. Once set, it is not possible to remove them without damaging the base material that they are set in. The base material is the weakest link when working with concrete and masonry fasteners. If pulled on hard enough, the base material will fail and the anchor will become detached. This will leave a hole in the concrete that is the shape of an upside down cone. The amount of force required to remove the anchor is called the ultimate pullout or ultimate tension load. The pullout value is determined by the diameter of the anchor and the depth of embedment of the concrete anchor in the base material. Also, each type of fastener has a different holding value for the same diameter and depth of embedment.

Can the nailon pin drive anchor be used in ungrouted hollow masonry walls?

Asked by JEAK January 20, 2020
1
Answer

The Zinc Nailon Pin Drive Anchors are only tested/rated for tension and shear loads in normal-weight concrete. Thank you!

Customer Reviews

  • 6 Customer Reviews
  • 4.2 out of 5 stars overall
0% of customers recommended.
Overall Ratings
5star-icon(4)
4star-icon(1)
3star-icon(0)
2star-icon(0)
1star-icon(1)
Sort By:
Was this helpful?
0
0
Nicely ...
Nicely
Was this helpful?
0
0
Easy to use good excellent in concrete...
Easy to use good excellent in concrete
Was this helpful?
0
0
4 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
They work great just don't bye to long ...
They work great just don't bye to long
Was this helpful?
0
0
Harder to drive pin in that others I've used before.
Harder to drive pin in that others I've used before.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers