Internet #204177941

Model #WR-318

WR-318 Dimmable Wall Switch with Remote – White

  • Easy DIY installation without a neutral wire
  • Ideal for bedrooms, control your light without having to get up
  • Works with incandescent, CFL or Tungsten light bulbs
  • See More Details

Frequently Bought Together

+
+
Price:
$3105

Product Overview

The SkylinkHome On/Off/Dim Wall Switch Receiver Kit (WR-318) gives you the convenience of controlling your lighting with a Snap-On Remote. This is ideal to turn off the lights from your bedside, turn the lights on as you pull up on your driveway or dim the lights for a movie without getting up to do it. Simply replace your existing wall switch with the new Skylink Wall Switch receiver. Unlike many other brands of wall switches, our Skylink HomeControl Wall Switch receiver doesn't require neutral wiring, making the installation even easier. Once properly installed you will be able to wirelessly turn the lights on and off, or dim and brighten with the wall switch or the included Snap-On Remote. The remote can be snapped into the opening of the Wall Switch receiver and be used as a remote Wall Switch. The Snap-On Remote carries a signal up to 500 ft. away in an open area. You can also add up to eight Skylink wireless transmitters, such as the Wireless Wall Switch (TB-318), Motion Sensor (ID-318) or Remote Controls (TC-318 Series), to control your Wall Switch receiver.
  • Adjust your lights with a remote control
  • Turn your lights on/off or dim/brighten from either your Wall Switch or Snap-On remote
  • Replace your existing wall switch with the Skylink On/Off/Dim Switch receiver (WR-001)
  • Install without neutral wire! Easy installation and DIY
  • Remote can be snapped into the opening of the Wall Switch
  • Works with light loads as well as appliance loads of up to 300W at 120V AC
  • Up to 500 ft. operating range
  • Works with incandescent, CFL or Tungsten light bulbs
  • Operation range up to 500 ft. in an open area
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Dimmers

WR-001 Dimmable Wall Switch - White
current product
WR-318 Dimmable Wall Switch with Remote – White
Wireless 3-Way On/Off/Dimmer Kit Easy Installation without Neutral Wire300-Watt Plug-In Tap CFL-LED Dimmer Lighting Kit
BrandSkyLinkSkyLinkSkyLinkSkyLink
NameWR-001 Dimmable Wall Switch - WhiteWR-318 Dimmable Wall Switch with Remote – WhiteWireless 3-Way On/Off/Dimmer Kit Easy Installation without Neutral Wire300-Watt Plug-In Tap CFL-LED Dimmer Lighting Kit
Price
$2437
$3105
$3734
$4545
Ratings
(3)
(7)
(38)
(1)
Electrical FeaturesWall Plate IncludedRemote Control,Wall Plate IncludedIlluminated,Kit,ProgrammableIlluminated,Kit
Wattage (watts)300300300300
Compatible Bulb TypeCFL,IncandescentCFL,IncandescentCFL,IncandescentCFL,Incandescent
Control TypeRockerRockerTapTap
Mounting TypeWall Mounted,Wall Switch,Wire-InWall Mounted,Wall Switch,Wire-InWall Mounted,Wall SwitchPlug-In,Plug-In
Works WithAlexa, Proprietary AppAlexa, Proprietary App
Voltage120 volt120 volt120 volt120 volt
Smart Home ProtocolProprietary ProtocolProprietary Protocol
Indoor/OutdoorIndoorIndoorIndoorIndoor
Amperage (amps)2.52.52.52.5
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
3.2
Product Height (in.)
8.4
Product Width (in.)
5.3

Details

Amperage (amps)
2.5
Color Family
White
Color/Finish
White
Compatible Bulb Type
CFL,Incandescent
Control Type
Rocker
Electrical Features
Remote Control,Wall Plate Included
Electrical Product Type
Dimmer
Hub Required
SkylinkNet Hub
Indoor/Outdoor
Indoor
Mounting Type
Wall Mounted,Wall Switch,Wire-In
Power Options
Hardwired
Rating
General Purpose
Remote Access
No Remote Access
Requires Hub?
Requires Smart Hub
Returnable
180-Day
Smart Home
Smart Home Enabled
Smart Home Protocol
Proprietary Protocol
Voice Control Hub Required
Alexa via Proprietary Bridge/Gateway
Voltage
120 volt
Wattage (watts)
300
Wired or Wireless
Combo
Works With
Alexa, Proprietary App

Warranty / Certifications

Manufacturer Warranty
One Year

Questions & Answers

7Questions9Answers

Does this switch work with LED and Halogen bulbs?

Asked by Danny January 8, 2018
3
Answers

Regarding your question, the Skylink model WR-318 works with incandescent, CFL or Tungsten light bulbs.

How do I control the light using the dimmer feature?

Asked by Coco November 20, 2017
1
Answer

Press and hold the remote transmitter will dim or brighten the lights. Also, pressing and holding the metal plate on the wall switch will dim.

Can two of these be used side by side without interfering with each other? Is is hd enough to t...

Asked by Bill November 7, 2017
1
Answer

We don't recommend installing our units right next to each other, because you may experience an interference between them. As long as the garbage disposal does not exceed the wattage capacity, it should be able to operate it.

Can I use this to control a ceiling fan that is 2 speed, hard wired?

Asked by Rich July 12, 2017
1
Answer

This has a dimming feature, for ceiling fan, go with WE-318.

Does the kit include the TB318 remote switch?

Asked by Joe November 7, 2015
1
Answer

The WE-318 or WR-318 kits do not come with the TB-318. They come with the TM-318 remote control. If you want the WR-001 with TB-318 you need to buy the SK-7. If you wish to buy the WE-001 and the TB-318, you need to buy the SK-8.

Will this work for LED recessed lightS

Asked by VBY October 26, 2015
1
Answer

No, this only works with incandescent, CFL or Tungsten light bulbs.

Ok for fluorescent lights?

Asked by MFinLV September 2, 2015
1
Answer

No, it is for incandescent and CFL light bulbs only.

Customer Reviews

  • 7 Customer Reviews
  • 3.6 out of 5 stars overall
67% of customers recommended.
Overall Ratings
5star-icon(2)
4star-icon(3)
3star-icon(0)
2star-icon(1)
1star-icon(1)
Sort By:
Got 2 motion sensors. One was a little short...
Got 2 motion sensors. One was a little short on range, but both are very light sensitive. There are 3 settings, but had to go with on all day since the dark and middle settings are too sensitive to our walkway lights.
Was this helpful?
0
0
Response from ManufacturerOctober 23, 2020
Thank you for purchasing and reviewing our product. Short range normally is due to a weak battery. Please try replacing it. If issue is not resolved, please call our technical support team at 1-800-304-1187 between 9:00 AM and 5:00 PM EST Monday to Friday so we correct the situation. SKYLINK
The item functions as it should, but the look of...
The item functions as it should, but the look of the wall plate could be greatly improved by providing a "dummy" to plug into it while the remote is elsewhere.
Was this helpful?
0
0
Response from ManufacturerMay 31, 2020
Hi, thank you for your valuable feedback, it will be shared with our product development team. Should you need any support in the future, please email support@skylinkhome.com. Thanks! SKYLINK
I like the product that I purchased a 2nd. ...
I like the product that I purchased a 2nd. Have to admit, that I still am not sure exactly how I got these to function as expected. I have both Motion Detector & Remote-Switch.
Was this helpful?
0
0
Easy to install and works perfectly....
Easy to install and works perfectly.
Was this helpful?
0
0
It stopped working after just a couple of months.
It stopped working after just a couple of months.
Was this helpful?
0
0
Exactly what I needed.
Quality :
5
Value :
3
It worked perfectly for my purposes. I was able to install the switch at the bottom of my basement steps to control the light at the bottom. Then I used Velcro to attach the remote at the top of the basement steps. So no I dont have to walk down in the dark. I just use the remote to turn on the light at the bottom.
Was this helpful?
0
0
Hagerstown, MD
Works fine and is half the cost of the Lutron version
Very easy to install. Must pay close attention to the programming instructions as you have several options to choose from. The remote is somewhat awkward to remove from the wall plate but 99% of the time I keep the remote nearby on on a table/night stand so not really much of an issue. What is a little disappointing is the wall plate without the remote snapped in looks unfinished. If I did not know what it was I would not want to touch it.
Was this helpful?
2
0
Review this Product
Share your thoughts with other customers