Portable Propane Gas Grill in Stainless Steel

A:  This grill has only 1 "U" shaped burner. Ours gets very hot at the bend but has almost no heat at the ends of the burner. I am not very happy with the uneven temps of this grill.

A:  1 adjustment knob, 1 burner, but it is a loop burner works great for a small tailgate bbq

A:  Two. Very pleased with this small grill.

A:  There is one burner that runs the width of the unit. Caution, mine does not regulate the flame properly so the is jut one temp and that is high.

A:  There is one burner. We are not all that thrilled with the grill itself. We bought it for RVing because it was light

A:  Two. If you buy the conversion kit, you can hook it up to a full tank of propane so you don't have to keep using those little tanks the conversion kits only like $15 or something totally worth it.

A:  Absolutely love my grill. Hardly cook in the house any more. Couldn't be any more happier!

A:  Some store have it in stock.

A:  Uncertain what you are looking for, mounting bracket? For storage or mount to cook on. We used a small foldable aluminum table and it works fine. The legs fold down and probably could attach base to wood or ? Neat little BBq for the money a good buy.

A:  My wife bought me this grill for our sailboat. With the legs folded under they form a flat surface. Buy two 1" 1/4"wide 1/4" thick x 11 1/2" Long, each aluminum flat bar. Drill 4 holes through the flat bar two and into SS leg. Counter sink the pan head SS screws such that the bottom of the alum flat bars are totally flat and use Nylock nuts on the back of the legs with a SS washer. Use anti Sieze for the stainless steel to alum. Take legs off and mount alum. bar on the workbench. Reattach assembled legs to the grill. Now you have two flat strong mounting points across the bottom between the legs. My plan is to drill and tap 1/4" x 20 threaded holes in the 1/4" flat bar and mount it to brackets on my sailboat. Or just through bolt it. Rail brackets are available for most SS rail sizes. Any drippings etc will fall overboard. I expect it to work great. Hope this helps another. Or look up Force 10 BBQ mount brackets. The would work for the mounting with the above modification to the grill. This will be plumbed to my large Propane tank on board. (tanks are vented overboard of course.) JB

A:  no

A:  Sorry, no. The feet fold up and you could probably make something. But nothing is included

A:  no

A:  No. But I highly recommend!

A:  Good Question MB. The 6TV1U00SS1 Aussie grill comes with a RV bracket which is the same grill. Adding the bracket option would sell more grills on HD. I happen to be in the business for one for my RV and have to go through Amazon or my RV dealer to get it.

A:  No but you could fabricate something.

A:  Not that I'm aware of.

A:  You can use a 1 lb. tank with this grill.

A:  16 oz bottle, but you can use a full size tank if you purchase a hose

A:  You can use a 20 lb tank w a converter gas hose.

A:  Hi Dick, This grill accept any 1 lb propane tank. I'm looking for to buy an adapter hose to use a 20 lb tank. Just keep in mind that no all hose adapter will fit on this grill, you'll need to check with someone at the home depot grill department. Enjoy your grill.

A:  With an adapter you can use a large 20lb tank. That’s what I use.

A:  I use a 20 lb propane tank instead of the recomended portable canister. You might need the installation kit to use this tank thought.