#1 Home Improvement Retailer

Internet # 306653281

Model # STV-M

Store SKU # 1003545560

4 in. Master Connector Kit for Dryer Installation

Apply Now
Pay $15.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Includes a 90° elbow, 2 snap connectors, 2 seal rings, and hose
  • Made from fire-resistant material to ensure added safety
  • Suitable for use with both electric and gas dryers
  • View More Details
0 in stock
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Snap to Vent Master Connector Kit includes one 90° elbow connector one straight connector, 2-seal rings and 2-snap connectors as well as one 4 in. dia. by 8 ft. long aluminum flexible hose. The 90-elbow is patented with a quick connection with the hose. . Pre-assemble the hose to the 90-elbows with the snap connector, place the seal ring over the vent and push 90-elbow connector onto duct for a quick, air tight and easy install. If dryer is not against a wall use the extra piece of dryer vent tape to secure 90-onto dryer vent. For regular dryer vent cleaning maintenance, simply pull the connector off the dryer vent duct for access and push back on when complete. Designed for all 4 in. round dryer vent duct.


  • Universal dryer hookup for both electric and gas dryers; also works with semi rigid or flexible dryer hose
  • Includes 90° elbow, straight connector, 2 snap connectors, 2 seal rings and one 4 in. dia x 8 ft. long flexible hose; optimal for connecting from dryer duct to wall vent duct
  • Quick and easy dryer installation, snap the hose onto the elbow connector and place and simply push hose and connector onto duct
  • Fire resistant materials for added safety
  • Easy off/on access for dryer vent clean out to help dryer efficiency and to prevent dryer fires
  • Return Policy

Product Information

Internet # 306653281

Model # STV-M

Store SKU # 1003545560

Additional Resources

Shop All Snap to Vent



Product Length (ft.)

.4625 ft

Product Width (in.)

4 in


Appliance Category

Appliance Parts

Appliance Series

Not Applicable

Appliance Type


Brand Compatibility

Works with any 4 in. dryer vent

Compatible Appliance Type

Electric Dryer, Gas Dryer

Dryer Part Type

Dryer Installation Kit



Model Compatibility

All standard 4. dryer vent and wall vent

Pack Size




Warranty / Certifications

Manufacturer Warranty

Delivered without manufacturing defect

Questions & Answers

Q:When I received the product, I noticed that one end of the 90-degree elbow is oval,. Neither the dryer hose provided and the connections on the dryer or wall will fit the oval end of the 90-degree connection. Is there another way to connect this?
by|Jan 12, 2024
0 Answer
Answer This Question
Q:Can I use this Master Connector kit with the plastic 90 degree elbows on my gas dryer that has been converted to propane?
by|Oct 30, 2023
0 Answer
Answer This Question
Q:Can the kit be used with a telescopic vent?
by|Feb 5, 2023
0 Answer
Answer This Question
Q:what is the inside diameter of the 90 degree elbows?
by|Jan 6, 2023
1 Answer
Answer This Question

A:  Hi Eddie, it's about 4.2 inches and tapers down less

by|Mar 18, 2024
    1 found this answer helpful
    Showing 1-4 of 16

    Customer Reviews

    3.7 out of 5

    • 3.7 out of 127 reviews
    • 71% recommend this product
    Filter by:
    Showing 1-10 of 127 reviews
    This is a great concept but SnaptoVent needs to improve the gasket connection to the dryer and wa...
    This is a great concept but SnaptoVent needs to improve the gasket connection to the dryer and wall. Ours apparently fell off - there is lint everywhere behind the dryer and up the wall. We are having the delivery company return to re-install the vent hose using clamps. Our washer/dryer are on pedestals.
      10 found this review helpful
      • Verified Purchase
      The snap to vent product wad easy to install and I ampleased with it.
      • Verified Purchase
      Would give a zero, but that is not an option. This product is defective junk. The connection is tapered so doesn’t slide on a 4 inch duct pipe. Used hairdryer to try to get it on and only ended up bending my duct pipe. Couldn’t ever get this on fast enough to leave in place. Tried to duct tape it on. Then realized it sticks further from the wall than the flex house I was trying to replace. Do not water your time out money.
      • Verified Purchase
      Shipping only available and it takes insanely long to receive
      I order this on 3/15/24 and it isnt set to arrive until 3/26/24 which seems too long in my opinion. Everything else in that order arrived within 2
        • Recommended
        piece of JUNK
        does not stay on vent pipe without plenty of tape. Could not use elbow on back of dryer. Had to buy two clamps and extra tape. Do not recommend!
          The plastic extensions have no solid connection to the dryer or exhaust vent, and they slide off and don't stay connected. Nice idea, poor design.
          • Verified Purchase
          Elbow connections won't stay on
          This connection concept is great in theory if your dryer and wall will allow you to have the elbow pressed against a wall to hold it in place. There is not another way to keep the elbow on; tape, clamps, etc., will not hold, only something pressing on the back. I have a couple of inches in play behind my dryer and that is enough that a gentle wiggle of the dryer, such as closing the door, knocks the elbow off and then lint escapes. The wall connection elbow is the same way.
            1 found this review helpful
            • Verified Purchase
            elbows would not stay in place. threw the whole thing away, and went back to standard vent connection with clamps.
            • Verified Purchase
            2 found this review helpful
            Showing 1-10 of 127 reviews