Internet #206398813

Model # FSG2J24CP

Store SKU #1002336730

0047569072178

Square D

40-60 psi Pumptrol Well Pump Water Pressure Switch

  • Suitable for jet pumps, submersible pumps and reciprocating pumps
  • Standard-action contacts open on rising pressure
  • Provides rugged and reliable performance
$ 19 17
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Suitable for jet pumps, submersible pumps and reciprocating pumps
  • Standard-action contacts open on rising pressure
  • Provides rugged and reliable performance
This Square D Pumptrol FSG2J24BP electromechanical pressure switch is the most trusted brand in residential, commercial and industrial pumping applications. For over 75 years, Square D pressure switches continue to meet the needs of our customers. The FSG2J24BP has a 40 psi to 60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
  • Controls electrically driven water pumps
  • Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
  • Switch is UL listed and CSA certified
  • FSG2J24BP has 40 psi to 60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
  • Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements



  • Click here for more information on Electronic Recycling Programs

Product Overview

  • Suitable for jet pumps, submersible pumps and reciprocating pumps
  • Standard-action contacts open on rising pressure
  • Provides rugged and reliable performance
Model #: FSG2J24CP
Sku #: 1002336730
Internet #: 206398813

This Square D Pumptrol FSG2J24BP electromechanical pressure switch is the most trusted brand in residential, commercial and industrial pumping applications. For over 75 years, Square D pressure switches continue to meet the needs of our customers. The FSG2J24BP has a 40 psi to 60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

  • Controls electrically driven water pumps
  • Universally accepted and recognized design is easy to wire, features drift proof cut-in and cut-out settings and has visible vertical contacts which are easy to inspect
  • Switch is UL listed and CSA certified
  • FSG2J24BP has 40 psi to 60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached
  • Pressure switch is RoHS compliant, NSF certified to meet federal low lead requirements



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
3.76
Product Height (in.)
2.8
Product Width (in.)
2.78

Details

Brand Compatibility
Pressure Switch
Commercial/Residential
Residential
Product Weight (lb.)
1lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
18 months

Specifications

Dimensions

Product Depth (in.)
3.76
Product Height (in.)
2.8
Product Width (in.)
2.78

Details

Brand Compatibility
Pressure Switch
Commercial/Residential
Residential
Product Weight (lb.)
1lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
18 months

Questions & Answers

Is this a low pressure switch? Does it cut off the pump when it goes below 20 psi?

Asked by: duck
low presser is cut in (turn on the pump)
Answered by: kcw
Date published: 2018-08-29

can this be used with a 12v system

can this be used with a 12v system
Asked by: hotrod
NO
Answered by: MAX
Date published: 2019-05-25

What is the electrical rating at 230 volts and is it considered a 2 pole switch? Is it suitable f...

What is the electrical rating at 230 volts and is it considered a 2 pole switch? Is it suitable for a deep well pump?
Asked by: waltj
Yes it is a double pole switch and can be used for 120 or 230 volt and up to 2 hp pump. I have bought several of these for different wells and the only problem has been ants getting in the contacts and that is the same for all pump switches regardless of the brand. I always keep a spare switch and pressure gauge on hand. If used for 120 volts, you can use one set of contacts and save the second set for use later if needed. You can also adjust the on-off pressure if needed. It is factory preset for 40 on and 60 off. Instructions are included. It is a quality switch!
Answered by: Papaw
Date published: 2018-09-05

What is the difference between the pressure switch with a lever to reset and the one that does no...

What is the difference between the pressure switch with a lever to reset and the one that does not have a lever. Does the one without the lever reset automatically when there is a power outage?
Asked by: Rich
A pressure switch with a lever may cause you to visit the basement more often than you wanted if your well water level has a tendency to slip below the well pump for a moment. Our well water service rep hates pressure switches with reset levers because they can be as temperamental as a motion sensor light switch.
Answered by: ArtofHome
Date published: 2019-03-29
  • y_2019, m_6, d_18, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_, sid_206398813, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • QUESTIONS, PRODUCT

Customer Reviews

40-60 psi Pumptrol Well Pump Water Pressure Switch is rated 4.5 out of 5 by 37.
Rated 4 out of 5 by from Installation of this pressure switch is simple and straightforward. Pressure setting adjustments ... Installation of this pressure switch is simple and straightforward. Pressure setting adjustments likewise. I give it an Ease of Installation of only Average because the terminal wire screws of the shipped switch were impossible to loosen with a screwdriver. Seriously, I had to use a 5 inch vise-grip pliers to turn the screw heads counter-clockwise. The screws must have been installed at the factory with an impact drill driver. The Square-D unit that was replaced had failed from sediment clogging the intake, so I still rate the brand high.
Date published: 2019-03-29
Rated 3 out of 5 by from Poorly calibrated switch, shut off breaker when relief valve popped... Poorly calibrated switch, shut off breaker when relief valve popped at 75psi. Reset and re-calibrated using a precision test gauge. After a few cycles was left set at 55-35psi after reducing tank air pressure to 28psi. Very repeatable after calibration, just make sure you have a new gauge and good relief valve installed on startup.
Date published: 2019-05-28
Rated 5 out of 5 by from Worked perfectly once correctly installed. Worked perfectly once correctly installed.
Date published: 2019-05-22
Rated 5 out of 5 by from Simple easy fix that most DIY can do Simple easy fix that most DIY can do
Date published: 2019-05-28
Rated 4 out of 5 by from It worked...yea... It worked...yea...
Date published: 2019-05-07
Rated 5 out of 5 by from replaced orginal just fine Was pretty much the same as the 15-year-old part it replaced, fit exactly as needed. Pressure setting range of 40-60 was right in line, no adjustment was needed.
Date published: 2016-05-17
Rated 5 out of 5 by from Easy to install! After having terrible water pressure for quite some time, we finally broke down and biught a new switch. After shutting off the power, we removed the old one, cleaned the pipe a little and installed this one. In total, the installation took roughly 30 minutes, from start to finish. As soon as we turned the power back on, the pressure was amazing. Showering without the water just dripping and filling the bathtub in just a ew minutes is so nice to have back! We are now 6 weeks in and have had no problems with this switch and the pressure is still as strong as Day 1!
Date published: 2018-10-01
Rated 5 out of 5 by from I haven’t had it that long to know how long... I haven’t had it that long to know how long it will last, but so far no problems with the pumptrol water pressure switch.
Date published: 2018-12-19
  • y_2019, m_6, d_17, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_, sid_206398813, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • REVIEWS, PRODUCT