#1 Home Improvement Retailer

Quilted Fleece Full Heated Blanket in Newport Blue

How to Get It

Product Overview

Cozy up to extra warmth with the Sunbeam Quilted Fleece Heated Blanket so you can sleep warm and comfortably during colder winter months. This extra-soft, quilted fleece blanket gently wraps you in warmth with Sunbeam's patented ThermoFine technology to auto-adjust for consistent heat control and distribution. This blanket is designed to fit full-sized beds.
  • 100% polyester with160 GSM per side (320 total)
  • Channeled construction with hem finish
  • 10 heat settings with 10-hour auto-off feature
  • Washable and dryer safe

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
13.2 in
Product Height (in.)
6.6 in
Product Width (in.)
11.2 in

Details

Bath Accessory Type
Body Massager
Returnable
90-Day

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 2
    out of 21 reviews
  • 11%recommend this product
Filter by:
Showing 1-10 of 21 reviews
Another Blinking Controller
I think I can say that I don't intend on spending my money with sunbeam heated blankets again. I know they’ve been producing blankets for years and years so with that being said, one would think they’d have it figured out by now. This time the controller blinks and blinks like so many other customers. No amount of resetting has corrected it. Signed: one COLD and furious customer.
by
Response from SunbeamMay 4, 2022
Thank you for reaching out to Sunbeam®. We are sorry to hear that your heated blanket's controller is blinking. That is not the kind of experience that we want you to have. No worries, we are here to help. If your heating blanket's controller is blinking, it might be because the unit is not getting enough power from the wall outlet where it is currently plugged in or the cord is not properly attached to the unit itself. To fix this problem, please do the following to reset your product: 1. Unplug the power cord from the electrical connection and from the actual product itself for 3-5 minutes. 2. Re-plug the cord into the product. Make sure the connection is secure and complete. 3. Re-insert the power cord back into a wall outlet. Do not use it with any extension cords, power strips, and power converters or inverters as it may affect the heated blanket's performance. Your Sunbeam® Fleece Heated Blanket has a 5-year limited warranty. If this doesn't resolve your issue, we'd like to kindly request that you contact us directly or fill out the Contact Us link below to help you get to the best resolution. Have a good day! https://www.sunbeam.com/support/contact-us
    Stopped working
    Just like many of the other posters, my blank stopped work. I didn't wash it or over use it. During the California rain event, the blank didnt work. No more heat even at the highest setting. Had a Sunbeam blank that lasted 3years with almost daily use. This one did not last even 4 months with very sparse use
    by
    Response from SunbeamJan 13, 2022
    Thank you for contacting Sunbeam®. We are very sorry to hear that your heating blanket is not working and will do everything we can to provide you with a resolution as soon as possible. Let's see if we can resolve this issue together. Below are the possible reason why a heating pad may not work properly: 1. Product is plugged into an extension cord/surge protector and not plugged into a direct wall outlet. 2. Product wasn't plugged in properly. To FIX this problem, do the following to reset your product: 1. Unplug the power cord from the electrical connection. 2. Unplug the cord from the actual product itself (if your product has a detachable cord) 3. Re-plug the cord into the product. Make sure the connection is secure and complete.(if your product has a detachable cord) 4. Re-insert power cord back into a wall outlet. If this doesn't resolve the issue, please contact us. Have a great day!
      Didn’t work out of the box
      One controller just blinks while the other controller and side of the heating blanket is working. Have tried to unplug/replug connections as instructed. Still does not work. This is my third sunbeam in three years. The previous two all quite working after one year. Trying to find another brand for heated blankets now.
      by
      Response from Consumer CareJan 6, 2022
      Thank you for contacting the Sunbeam® Brand. We appreciate your time and effort for bringing this to our attention. We are sorry to hear that the Sunbeam® Fleece Heated Blanket with Dial Control did not exceed your expectations and that its controller blinks. This is certainly not the experience we want you to have. We will be more than happy to rectify your issue today. If your bedding product is not working properly, it could be because the unit is not getting enough power or there’s an internal error found. A blanket, mattress pad or heated throw will not heat for the following reasons: 1. Bedding product is plugged into an extension cord and plugged into a direct wall outlet. 2. Bedding product wasn't plugged in properly. 3. The 10 hour auto-off activated (some models) 4. Temperature control was not turned to the highest setting and adjusted for personal comfort. 5. Dual control blanket controls are operating on the wrong sides. 6. Make sure control isn't in the off position. Also check if there's physical damage on its cord. If there's none, please try to perform the troubleshooting steps below in case your bedding is still turning on. 1. Turn the blanket control to the "Off" position and unplug the power cord from the electrical connection. Let it rest for 2 minutes. 2. Check the bedding product plug connection that directly plugs into the bedding product. Make sure the connection is secure and complete. 3. Hold the power button down and re-insert the power cord back into a wall outlet at the same time. 4. Turn control to “HI” and wait 5-7 minutes. If the steps above are not followed in order, the bedding product will not properly reset. If these measures won't work and the problem still persists, take note that our heated blankets have a 5 year limited warranty, if you have any questions about the warranty or want to get warranty service, please contact Sunbeam® directly so that we can provide you with a better solution. Have a nice day! https://www.sunbeam.com/support/contact-us
        Don't!
        Did not last one season Was a waste of my money and I won't buy this brand again.
        by
        Response from Consumer CareDec 17, 2021
        Thank you for contacting the Sunbeam® Brand! We appreciate you bringing this to our attention and we are sorry to hear that your Sunbeam® Fleece Heated Blanket with Dial Controller stopped working. It's definitely not the experience that we want you to have. No worries, we are here to help. There are several causes to this issue: 1. Product is plugged into an extension cord/surge protector and not plugged into a direct wall outlet. 2. Product wasn't plugged in properly. 3. The AC outlet is not functional. To fix this problem, do the following to reset your heating pad: 1. Check if there is no physical damage on its cord, controller or pad. 2. Turn the heating pad control to the "Off" position and unplug the power cord from the electrical connection. Let it rest for 2 minutes. 3. Check the product plug connection that directly plugs into the product. Make sure the connection is secure and complete. 4. Hold the power button down and re-insert the power cord back into a wall outlet at the same time If the above steps will not work and if you have any questions regarding the warranty or would like to obtain warranty service, please contact Sunbeam® directly or fill in the "Contact us" link provided below so that we can provide you with a better solution. https://www.sunbeam.com/support/contact-us Have a nice day!
          heats well, controller is a problem
          POOR CONTROL DESIGN. handicapped, need to use Alexa VOICE to turn on and off. 10 hr cut out would be great. BUT, it must be manually buttoned ON after any power out or Alexa plug shut off.
          by
          Response from Consumer CareNov 19, 2021
          Thank you for contacting the Sunbeam® Brand. We appreciate your time and effort for bringing this to our attention. We are sorry to hear that the Sunbeam® Fleece Heated Blanket with Dial Controller did not exceed your expectations. This is certainly not the experience we want you to have. We want to make sure that we provide quality products that have great value, stylish and will suit your needs. As we are looking for ways to better our product and service, we always ensure that consumers' feedback and concerns are shared with the concerned department. If you have any questions about the warranty or want to get warranty service, please contact us directly or fill in the "Contact us" link provided below so that we can provide you with a better solution. https://www.sunbeam.com/support/contact-us You may check on our latest products to see if there is something similar to your older product that you might like. Have a nice day!
            Blanket stopped working
            I also bought this blanket in autumn of 2020 or November of 202 It worked great up until now that I plugged it in for this winter. It has stopped working. All the controller does is blink. I unplugged it from the wall as well as the plug directly into the blanket. It still does not work, does warm and all it does is blink.....
            by
            Response from SunbeamOct 14, 2021
            Thank you for contacting the Sunbeam® brand! We sincerely appreciate your time reaching out and giving us your honest feedback and experience about your heated blanket/throw. We are sorry to hear that it's not heating. Our bedding products were made with the highest quality materials and we expect them to last. That is not the experience that we want you to have. We will be more than happy to rectify this. Please try to perform the troubleshooting technique below. Make sure the product is not plugged into an extension cord/device. This can cause a fault. 1. Turn the blanket control to the "Off" position and unplug the power cord from the electrical connection. Let it rest for 2 minutes. 2. Check the bedding product plug connection that directly plugs into the bedding product. Make sure the connection is secure and complete. 3. Hold the power button down and re-insert the power cord back into a wall outlet at the same time. If the 3 steps above are not followed in order, the bedding product will not properly reset. If troubleshooting techniques won't work, please contact us directly in order to determine the best resolution. Have a great day!
              AWFUL!
              I bought mine 4/16/21. I live in Oklahoma so did not need it during our summer heat. However my grandma flew in and I assured her I bought her a heated blanket and it to bring hers. She does not sleep well at all without a heated blanket! So I opened it up so proudly bc I made her smile. And then BOOOOOOM! Here comes her disappointed look because it will not even turn on. She has already bought a ticket home for tomorrow instead of 1 week. So thanks sunbeam for not following through on a product you sell that does not work. Why did I not listen to all these reviews???!!!????!!!
              by
              Response from SunbeamAug 10, 2021
              Thank you for contacting Sunbeam®! We appreciate you bringing this to our attention and we are sorry to hear you're having difficulties with your heated blanket. It's definitely not the experience that we want you to have. These are the possible reasons for a heated blanket not to function properly: 1. Product is plugged into an extension cord/surge protector and not plugged into a direct wall outlet. 2. Product wasn't plugged in properly. To fix this problem, do the following to reset your heated blanket: 1. Unplug the power cord from the electrical connection. 2. Unplug the cord from the actual product itself (if your product has a detachable cord) 3. Re-plug the cord into the product. Make sure the connection is secure and complete.(if your product has a detachable cord) 4. Re-insert power cord back into a wall outlet. If same problem happens, we believe that this concern is covered by the wonderful warranty that your product may have. In order to process a replacement, we may need to gather more information. We'd like to kindly request that you contact us directly in order to help you get to the best resolution. We hope this helps!
                Disappointed
                Bought cause it was lightweight. Was really warm at first, now can't feel warmth at all on highest setting. For the price, should have been made better
                by
                Response from Consumer Care Mar 15, 2021
                We are sorry to hear that your Sunbeam® Fleece Heated Blanket with Dial Controller stopped heating. We recommend you to reset it by unplugging and plugging it back in. Make sure to check the cord if it's tightly connected and plug it into a wall outlet. If it doesn't help, kindly give us a call at 1-800-892-7684 so we can further assist you. For your convenience, our product specialist is available Mondays - Fridays from 9:00 AM to 5:00 PM, EST.
                  Died within two months
                  It was great for about two months. Now the controller is blinking and I'm not sure how to fix it, and can't seem to find an easy replacement without having to pay for a whole new one.
                  by
                  Response from SunbeamMar 9, 2021
                  We sincerely apologize if you're having difficulties with your Sunbeam® Fleece Heated Blanket. There are several causes to a flashing control. 1.      Product is plugged into an extension cord/surge protector and not plugged into a direct wall outlet.    2.      Product wasn't plugged in properly.     To FIX this problem, do the following to reset your product:     1.      Unplug the power cord from the electrical connection.    2.      Unplug the cord from the actual product itself (if your product has a detachable cord)    3.      Re-plug the cord into the product. Make sure the connection is secure and complete.(if your product has a detachable cord)    4.      Re-insert power cord back into a wall outlet.       Hope this helps.
                    One use
                    I was given this blanket a day ago and only got one use out of it before it stopped working. I try unplugging it to see if it would help and it still doesn't work. Ridiculous
                    by
                    Response from Consumer Care Feb 23, 2021
                    We are sorry to hear that your Sunbeam® Fleece Heated Blanket with Dial Controller stopped working and the troubleshooting didn't work. Sunbeam has been producing high-quality products to ensure customer satisfaction. Allow us to turn this experience into a positive one by sending us an email at sunbeamconsumercare@newellco.com or call us at 1-(800)-892-7684. For your convenience our Consumer Care team is available Mon-Fri 9am-6pm, EST. We look forward to assisting you!
                      Showing 1-10 of 21 reviews