No, you need to bring your own tool and cut them outside the store in order to haul them home.
No unless you have a trailer. They will break if they overhang back of truck to far. I wouldn’t use this product again for roof covering unless the space was 12’x12’ or less. I would recommend the galvanized metal as it is more durable and less likely to leak
They are not loud I used 1x2 strips every 2 ft on top of joist to create less bounce
Properly installed panels for a roofing or sidewall application require screw attachment to the framing. If desired sealants can be used at the overlaps but glue is not sufficient to replace the mechanical fasteners.
You should use 1x2 strips perpendicular to the joist so you can screw each piece down the support
You would need at least 4 feet and plenty of ventlitation.
Gable trim is not available for this product
Recommended horizontal overlap is 1 corrugation. Recommended vertical overlap is 4 - 6"
Yes I used a pitch of 1/4" per foot. Worked great!