|Coverage Area (sq. ft.)||0 sq ft||Product Length (in.)||24 in|
|Product Thickness (in.)||0.625 in||Product Width (in.)||1.25 in|
|Material||Plastic||Product Weight (lb.)||1 lb|
|Returnable||90-Day||Roofing Product Type||Closure Strips|
A: Hi Rob, The dimensions for our Suntuf Universal Plastic Closure Strips are as follows: (7/8" H x 1 3/16" W x 24" L)
A: Hello, The distance between vertical strips ranges between 2-4"
A: Mount the. Vertical stripes plastic purlins closure strips on at least a two by two backer strips they are not vertical installation are strong enough to support a rough without backer strips. Hope this helps
A: I used these behind a clear polycarbonate panel on my horse shed. They seemed to work well in my application using them vertically on the shed door. Not sure that answers your question.
A: You install these UNDER the edge of the panel onto rafter to provide a stable support. You must screw them down in straight line and then place first panel from that start point for your roof. The opposite side of roof ‘strips’ should not be installed until you get there with the panels so you can place them to fit under the last row of last panel. You may need to overlap the last panel more than one corrugated rib to fit edge of roof properly.