- Half slot B channel with silver galv finish
- 13/16 in. channel depth
- Clean, paintable surface
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
The 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. with a silver-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 14-Gauge material can be cut to accommodate whatever size is needed to complete the job.
Highlights
- Use to hang conduit and other supports from ceilings
- 14-Gauge metal construction with half-slot holes
- Channel is 10 ft. in L and measures 1-5/8 in. x 13/16 in.
- Resistant to abrasion and rusting
- Clean finish has a paintable surface
- 1-5/8 in. x 13/16 in., 9/16 in. x 1-1/8 in. slots on 2 in. centers
- Note: product may vary by store
- Return Policy
Product Information
Specifications
Dimensions
Product Height (in) | .8 | Product Length (ft.) | 10 ft |
|---|---|---|---|
Product Width (in.) | 1.6 in |
Details
Gauge | 14 | Hole Configuration | Half-slot |
|---|---|---|---|
Material | Steel | Pack Size | 1 |
Product Weight (lb.) | 8.8 lb | Returnable | 90-Day |
Warranty / Certifications
Certifications and Listings | No Certifications or Listings | Manufacturer Warranty | Yes |
|---|
Questions & Answers
Do they even make trollys for this??
Yes. Newhouse Electric offers a 1-5/8 in. Strut Channel 4-Wheel Trolley Assembly with Eye Loop, Zinc-Plated Steel, Silver available on homedepot.com
Is this made in USA?
Yes, this product is made in the USA.
Has anyone attempted to trim off one of the sides to fabricate a kind of angle iron?
The photo of this item is incorrect. It shows 13/16 x 1-5/8 strut. I didn't figure that out until after I drove to the store to pick it up, unfortunately. It is correctly described in the specifications, though.
I don't think channel struts with these dimensions exist. I can't find them anywhere.
Thank you for bringing this to our attention. We will get this corrected.
The picture still shows a 13/16 x 1-5/8 strut. Mind you, it's 17Jan2025 now.
Can I use this to mount solar panels to a wood frame roof so as to have a gap above roof for air flow.
Yes, I did this on my RV!
Someone asked "What hardware do you use with the 'b' channel superstrut?". T&B replied "... use the search bar to look up item numbers 202077349 and 100189687..." But, both of those say "nut to be used on series A, C, E and H channel. Which is it???
Apologies, those part numbers are indeed specific to those channels and not series B. Please feel free to reach out to our Product Support team so that we can help. Product & Service Information 1-888-862-3290 (US) Fax: 1-800-816-7810 Technical Support T&B Brand Products: 1-888-862-3289 | us-iptechsupport@abb.com
Is this suitable for mounting a sign on it?bo
Yes, it will work well. I use it mount solar panels, and it's great.
can i use a 1-5/8 Strut Channel Trolley that works with Unistrut, Superstrut P1000, P2949 V2
your trolley will not fit into this 13/16 low profile strut
From an answer stated elsewhere the 13/16 side as depected is incorrect (wrong picture). But that is presumably (!) correctly stated in the Specs as being 1.086". No idea whether that is enough for the 'trolley'.
Viewing 1-8 of 30
Customer Reviews
4.8 out of 5
Loading Recommendations
Compare Similar Items
Product Length (ft.) | |||
|---|---|---|---|
10 ft | 10 ft | 10 ft | |
Gauge | |||
14 | 14 | 12 | |
Product Height (in) | |||
.8 | 0.8 | 1.625 | |
Material | |||
Steel | Steel | Steel | |
Hole Configuration | |||
Half-slot | Half-slot | Half-slot |
Related Products
10 ft. 14-Gauge Half Slotted Metal Framing Strut Channel - Gold Galvanized (ZB1400HS 10)
The Super strut 1-5/8 in. x 10 ft. metal framing channel can be used to create a trapeze for conduit and mechanical piping. The channel has 14-Gauge metal construction. The item can be cut to shorter lengths.
10 ft. 12-Gauge Half Slotted Steel Framing Strut Channel Green Urethane Powder Coated (ZA1200HS 10GR)
The Superstrut 1-5/8 in. x 1-5/8 in. x 10 ft. 12-Gauge Metal Framing Channel. It can be used for framing, mounting, load centers and vertical pipe support. This channel comes in a 10 ft. length but can be cut to meet your specifications. Slot spacing is 1-5/8 in. on center.
10 ft. 12-Gauge Half Slotted Metal Framing Strut Channel in Gold Galvanized (ZA1200HS 10)
The Superstrut 1-5/8 in. x 10 ft. Metal Framing Channel can be used for framing and mounting and for constructing load centers and vertical pipe supports. With a gold-galvanized finish and a half-slot construction, the channel can also be used to create a trapeze for conduit and mechanical piping and to support duct and cable trays. The 12-Gauge material can be cut to shorter lengths.
3-in. Steel Angled Single Channel Strut Mounting Bracket, Steel Square Post Base Connector
Get the right accessories to mount and support your electrical construction tools. Our 6x6 in. Steel Angled Single Channel Strut Mounting Bracket is a steel square post base connector designed for fastening 1-5/8-in. B Series standard struts to any stable surface. You can use them as single channel brackets for any steel, aluminum or fiberglass struts to provide a solid fixed point of installation for your metal framing applications. You can use it for a variety of applications, including pipe, conduit, ceiling grids, racks, duct and cable tray supports, trapeze supports, seismic bracing, and other general framing uses. Smart professionals know to prevent potential injury and damage to conduits by securing strut ends with the appropriate brackets. Each base connector is fashioned from durable steel and features 4 holes for stable attachment and 6 holes in the bracket for versatile single-channel mounting. You can attach them to the end of a strut channel with ease, creating a hardy base point to absorb structural stresses. They have a electro-galvanized finish that helps resist corrosion, which is especially useful in wet environments. Get durable added protection that enables your structure to stand snugly in position for a much longer duration. All of our fittings meet or exceed physical properties of ASTM A1011 GR 33 for elasticity, plasticity, stiffness, aging sensitivity, strength, hardness, impact toughness, fatigue strength and fracture toughness.
