|Actual Product Length (ft.)||8 ft||Actual Product Thickness (in.)||0.75 in|
|Actual Product Width (in.)||7.25 in||Coverage Area (sq. ft.)||9.66 sq ft|
|Nominal Product Length (ft.)||8 ft||Nominal Product Thickness (in.)||1|
|Nominal Product Width (in.)||8 in|
|Appearance Board Type||Hardwood Boards||Board Joint Type||Square Edge|
|Fastener recommendation||glue and nails||Features||Stainable|
|Finish Type||Unfinished||Lumber Grade||FAS|
|Material||Walnut||Moisture content||Kiln Dried|
|Number Of Boards Per Pack||2||Returnable||90-Day|
|Manufacturer Warranty||90 day|
A: Hi Gary, This is a very common application for these boards.
A: S4S stands for “surfaced on four sides,” which means the material is finished on all four sides. S4S is the most common type of dimensional lumber. S4S finished lumber and dimensional lumber are labeled by nominal size, or the rough board’s size before planed smooth. (For example, 1 x 6 equals 3/4 x 5 1/2.)
A: Hi Deee, Yes it can just make sure to use a food safe finish. Thanks for reaching out.
A: Hi John, The actual width is 0.75 in. x 7.25 in. x 6 ft. There is 2 boards per pack. Thanks for the inquiry