1-Gang Horizontal or Vertical Mount Weatherproof Extra Duty In-Use Cover/GFCI Combo
- Used wherever weatherproof protection is needed for a receptacle
- Kit includes box, receptacle, & cover
- Includes attached gasket and mounting hardware
- See More Details
Frequently Bought Together
Product Overview
- Quick-fit keyhole mounting system allows cover installation under a minute
- Self-test GFCI receptacle included
- Lockable tab (1/4 in. shackle)
- 2-3/4 in. deep
- Extra Duty rated
- NEMA 3R compliant
Product Overview
- Used wherever weatherproof protection is needed for a receptacle
- Kit includes box, receptacle, & cover
- Includes attached gasket and mounting hardware
Compare Similar Weatherproof Boxes
|  |  |  | |
| Brand | TAYMAC | GE | GE | GE |
| Name | 1-Gang Horizontal or Vertical Mount Weatherproof Extra Duty In-Use Cover/GFCI Combo | 20 Amp Backyard Outlet with Switch and GFI Receptacle | 20 Amp Backyard Outlet with GFI Receptacle | 2-20 Amp Backyard Outlet with GFCI Receptacles |
| Price | $2280 | $3492 | $3499 | $4987 |
| Ratings | (98) | (82) | (71) | (112) |
| Trade Size (in.) | Other | Other | Other | Other |
| Electrical Product Type | Cover | Outlet | Outlet | Outlet |
| View Product | View Product | View Product | View Product |
Compare Similar Weatherproof Boxes
| | | | |
| Brand | TAYMAC | GE | GE | GE |
| Name | 1-Gang Horizontal or Vertical Mount Weatherproof Extra Duty In-Use Cover/GFCI Combo | 20 Amp Backyard Outlet with Switch and GFI Receptacle | 20 Amp Backyard Outlet with GFI Receptacle | 2-20 Amp Backyard Outlet with GFCI Receptacles |
| Price | $2280 | $3492 | $3499 | $4987 |
| Ratings | (98) | (82) | (71) | (112) |
| Trade Size (in.) | ||||
| Electrical Product Type | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Details
Warranty / Certifications
Questions & Answers
IS THE RECEPTICLE A 20 AMP OR 15 AMP
Asked by james September 7, 2018Do not use a 15A receptacle on a 20A circuit. Think about it like this. If your circuit breaker is rated at 20A and your wiring is #12 (rated for 20A), what is stopping you from drawing 20A through your 15A receptacle? If you draw 20A through a product that's designed and rated for 15A, it will likely burn up and possibly cause a meltdown at the receptacle. The only thing a breaker does is protect the wire from melting its insulation, hence preventing shorts and fires. A GFCI receptacle does not provide ANY overcurrent protection. It detects leakage of current to ground ONLY at or after (downstream of) the GFCI receptacle itself. Think of a GFCI receptacle as "people protection". It sees that path to ground as possibly going through YOU and stops it from happening. Remember to always turn off power to the circuit before beginning your work. And I recommend a cheap GFCI tester (under $10) to make sure the receptacle is wired correctly once you're done. Be safe.
The GFI Light has the RED light on Saying that it needs to be replaced as soon as I turned it on?...
Asked by Scott July 21, 2017You might have to reset the GFI or you may have to recheck your wire connections. There are hot wires or line wires and Load wires which are the wire going to the next outlet.
I have installed the GFCI, but it keeps blinking red. Is there a manual to go with this product w...
Asked by HomeOwner November 6, 2017If the receptacle has never worked since installation, it may be wired wrong.The power should be hooked to the "Line" side terminals. Also you may need to verify that the black wire is your "hot" wire and that it has not been reversed. If you are certain it is correct, have an electrician check it out. There are a number of possible problems before determining the receptacle is defective.
Does it come with a rated outdoor GFCI?
Asked by Tony October 13, 2018Says WR on it (weather resistant)
DO I HAVE TO INSTALL A SINGLE GANG BOX IN THE WALL BEFORE I CAN INSTALL GFCI TO THE OUTSIDE WALL...
Asked by james September 9, 2018yes the gfi needs a single gang box to house it as the Taymac is only a cover and the space under the cover is for cord and plug. you can use an in wall box if you do not mind cutting open your wall or you can probably use a "on the wall" mount housing for the GFGI plug - generally a steel housing box or an outdoor rated plastic receptacle, Then the taymac cover mounts on the plug housing
No led light
Asked by Jass November 19, 2020is there electric at the outlet? If so short circuit it and then light should lite.
How to remove bottom plastic plate
Asked by Sparky September 17, 2020Pull on it
I lost the plastic slide off pieces from the box. do you sell replacement parts?
Asked by Georgie1585 October 21, 2019Customer Reviews
Related Products
