A: Hello. There are 4 mounting holes for this vise. Two holes at 5/16 in. and two at 3/16 in. The vise also comes with an instruction manual that explains how to properly mount it. If you have more questions, visit www.tekton.com/support and we will get you taken care of.
A: Should work just fine. If not, our tools are Always Guaranteed. Just give us a call at 888-648-3371 or reach out at tekton.com/tool-help.
A: I am assuming China. I no longer have the box or instruction sheet. However I am quite happy with the vise.
A: This vise is manufactured in China.
A: The better option is to install the vise under the bench top so that it is flush with the work bench top, however my bench was built so as to not allow this. I used two shims and mounted it on the top. see photo.
A: This vise can be mounted to a bench in the simple or flush positions, using lag bolts and wood screws. This hardware is not included.
|Name||6-1/2 in. Woodworking Vise||Precision Vise FMZ with Clamp||3.25 in. Industrial Strength Benchtop and Drill Press Tilting Angle Vise||3.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise|
|Jaw Capacity||0 in||2.25 in||3.25 in||3.5 in|
|Throat Depth||2.375||1.25 in||3.25 in||3.25 in|
|Hand Tool Type||Vise||Vise||Vise||Vise|
|Clamping Strength (lb.)||0||400||1900||1984|
|View Product||View Product||View Product||View Product|