Internet #202673372

Model #52325

Store SKU #346395

1,200 GPH Waterfall Pump

  • Ideal for creating small waterfalls up to 5 ft. tall
  • Includes a mesh barrier pumpshield®
  • Compatible with 1 in. ID tubing
  • See More Details
$9194

Frequently Bought Together

+
+
Price:
$9194

Specifications

Dimensions

Product Depth (in.)
9.3 in
Product Height (in.)
6 in
Product Width (in.)
4.8 in

Details

Adjustable Valve
No
Amperage (amps)
1.4
Discharge Flow @ 10 ft. (gallons/hour)
581
Discharge Flow @ 10 ft. (gallons/min)
10
Horsepower (hp)
1 hp
Indoor/Outdoor
Indoor/Outdoor
Maximum Capacity (gallons)
1200
Maximum Flow (gallons per hour)
1200
Maximum Horsepower (hp)
1
Maximum Pressure (psi)
6
Pack Size
1
Required Tubing Diameter (in.)
1
Returnable
180-Day
Vertical Lift (ft.)
14
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
2 year limited

Product Overview

TotalPond waterfall pumps have high performance, wet bearing motors capable of moving large amounts of water to create dynamic effects. These powerful motors are energy efficient and are designed for quiet performance so you can enjoy the sounds of flowing water, not the buzz of the motor. All of our waterfall pumps include a pumpshield to protect it from dirt and debris, which will also extend the life of the pump. The 1200 GPH Waterfall Pump is ideal for cascading waters up to 5 ft. in height. It has a maximum pumping height of 14 ft., is compatible with 1 in. tubing and comes with a 16 ft. power cord.
  • The 1200 GPH Waterfall Pump is ideal for small waterfalls up to 5 ft. tall.
  • With a maximum pumping height of 14 ft. at 0 GPH, this energy-efficient pump helps power a waterfall.
  • All TotalPond Waterfall Pumps have a back-spitting feature to cool the pump.
  • The internal design of the pump allows larger debris to flow out of the discharge and finer particles to flow out of the rear of the pump. This ensures that the shafts and bearings are being continuously cleaned.
  • Includes a mesh barrier pumpshield prevent debris from clogging the pump.
  • Pump design allows for simple and quick access to all moving parts; no tools necessary.
  • This pump includes a 16 ft. power cord to allow for flexible installations.
  • TotalPond pumps are not recommended for use in heavily chlorinated water or water with high pH levels.
  • We recommend its use in freshwater temperatures ranging from 41 to 86 degrees Fahrenheit.
  • For best results, we recommend using the largest tubing size recommended in the product specifications for reduced friction and maximum flow.
  • Compatible with 1 in. ID tubing
  • Dimensions: 9.3 x 4.8 x 6 in.
  • UL listed pump
  • Safe for fish and plants
  • 2 year warranty
  • Note: product may vary by store
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Waterfall Pumps

800 GPH Waterfall Pump
current product
1,200 GPH Waterfall Pump
2,000 GPH Waterfall Pump2,300 GPH Waterfall Pump
BrandBECKETTTOTALPONDTOTALPONDPOND BOSS
Name800 GPH Waterfall Pump1,200 GPH Waterfall Pump2,000 GPH Waterfall Pump2,300 GPH Waterfall Pump
Price
$7998
$9194
$10700
$13809
Ratings
(50)
(94)
(52)
(3)
Maximum Flow (gallons per hour)900120020002300
Voltage (volts)115120120120
View ProductView ProductView ProductView Product

Enjoy 10% off

Sign up for Style & Decor emails and save on your next order. Valid on select items.

Questions & Answers

30Questions22Answers

Thanks for responding my question about wattage. How this pump uses 80 watt? when specification s...

Asked by Harry October 17, 2020
1
Answer

Hello Harry. We will pass the information to our product development team so they can look further into this. Thank you for bringing this to our attention!

how much this pump consume electric watt?

Asked by harry October 16, 2020
2
Answers

Hello. This pump is 120V, 60Hz, and 80 watts. We hope this helps!

Does this unit filter also or do I need a seperate filter

Asked by Bill July 12, 2020
2
Answers

It came with both a filter and filter bag. I had also bought a larger filter bag for insurance since my pond gets filled with leaves.

Can this motor serve any waterfall? Or is it for specific models?

Asked by Milymart7 June 16, 2020
3
Answers

Hello, the TotalPond 1,200 GPH Waterfall Pump is ideal for creating small waterfalls up to 5 ft. tall. It has a maximum pumping height of 14 ft., is compatible with 1 and 1-1/2 in. tubing and comes with a 16 ft. power cord. We hope this helps!

Can you install an intake adapter by removing the front screen

Asked by Bee August 9, 2019
2
Answers

Hi, We do not recommend altering the intake on the 1200-GPH Waterfall Pump. This restriction of flow can cause issues for the pumps motor. We hope this helps.

Can this pump be used to pump to my filtration system? My pona is only about 600 gallons

Asked by Danielle June 9, 2019
2
Answers

Hello. Depending on your setup, this pump may work, but we will need to gather more information. Please contact our Customer Care Team at 1-888-412-6001 Monday-Friday 8am-6pm ET, so we can help you select the best pump for your water feature. We hope you will give us this opportunity to help.

How many watts does this punp use?

Asked by Alex May 2, 2019
2
Answers

This pump used 80 watts/1.4 amps. We are correcting the specifications section to reflect this information. We hope this helps!

What is the warranty

Asked by Tom August 23, 2018
2
Answers

I believe it's 1 year.

Can you provide GPH for this pump at 3.5 ft of head?

Asked by James July 24, 2018
1
Answer

At 3.5 ft. the 1200 GPH Waterfall Pump should provide 1150 GPH when using the largest tubing size recommended, which is 1.5 inches. We hope this helps!

can a person attach a filtering system to it?

Asked by l78o July 13, 2018
5
Answers

Yes

1,200 GPH Waterfall Pump - page 2

Customer Reviews

  • 94 Customer Reviews
  • 4.4 out of 5 stars overall
80% of customers recommended.
Overall Ratings
5star-icon(66)
4star-icon(16)
3star-icon(1)
2star-icon(4)
1star-icon(7)
Sort By:
Excellent pump, better than I expected, more than a month working and has the same strength, but ...
Quality :
5
Value :
4
Excellent pump, better than I expected, more than a month working and has the same strength, but it was necessary to clean the mesh (included) because my pond is growing algae. Does not include the hose adapter so you have to buy a 3/4 inch pvc female adapter.
Was this helpful?
0
0
Indoor Wall Fountain
Quality :
5
Value :
5
I replaced 2 aqua genius p4800 pumps with these slightly smaller pumps from TotalPond. My two previous pumps were 1400 gph and the two new pumps are 1200 gph. These go up a ten foot indoor wall fountain and work amazing. I will definitely purchase these again when replacing in the future. Don’t forget to register your pump for a 2 year warranty. Two thumbs up.
Was this helpful?
0
0
Works as advertised so far. It has been in operation for about 2 weeks. We are using it for a p...
Works as advertised so far. It has been in operation for about 2 weeks. We are using it for a pondless waterfall feature.
Was this helpful?
0
0
Indiana
Two versions of TotalPond LL1200 are very different
Quality :
1
Value :
1
I have purchased two TotalPond LL1200 pumps, a year and a half apart, but they are very different in size and fittings. First was purchased from Home Depot, lasted about a year and died. Working on getting repair/replace under warranty. The first one came with fittings to allow different sizes of tubing on outlet, and specified that 1" ID tubing was suitable. The second pump (SAME MODEL #) is a good deal smaller, fits garden-hose size on outlet and no instructions for size of pipe to use. Unfortunately, the second one purchased from a different store does not work at all; dead as a door nail. Home Depot has a like to the product manual which pictures the first, larger pump. This is bewildering, and very disappointing because I replumbed my waterfall line to accommodate the LL1200 and the flow was ideal with the first one. I was entirely happy with the first one, but for the difficulty of taking it apart to clean and maintain according to mfg. instructions. The videos on this page show the different pumps: the "care and maintain" video shows the larger, first model. The "installation" video shows the smaller, later model!
Was this helpful?
0
0
LIGHT DUTY SUBMERSIBLE PUMP
Quality :
4
Value :
4
Seeds Program Review
(What's this)
Great little pump for a water feature or waterfall. Has plenty of power to give about four and half feet of lift, says it will lift to five feet but it only trickles the water at that height. Comes with a screw on hose adapter for output. Whole unit sits in a leaf bag to keep the propeller free of debris in open water features. Standard 110 volt wiring that includes plug. Screw on adapter ideally fits various sizes of lift hoses. Make a beautiful water feature in any yard with this convenient little, easy to install pump.
Was this helpful?
2
0
An efficiency wonder
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I replaced my old 1900 GPH pump that used 230 watts with this one to save on energy. The LL1200 is rated to use 70 watts and I measured 73 watts with my wattmeter. You'd think that the new 1200GPH pump would pump less than the old 1900GPH pump, but you'd be wrong. Total Pond generously rates their GPH with a 5' lift. My old pump was rated at 1'. At 5' lift, the LL1200 does 1242GPH, the old pump does 1250. So I get the same amount of flow for less than 1/3 the energy usage. The information about fittings was confusing to me. The pump itself has a 1 1/4" Male Iron Pipe (MIP) fitting. A barbed adapter is provided that allows 1" or 1.5" inside diameter tubing to be pushed on. I have an algae problem in my pond, so I really like the idea of the provided barrier bag. One thing to note is if you use the barrier bag you need to run the cord out next to the outlet. In my case the pump goes in with the fitting down, so I lost about a foot of the 16' cord length due to using the barrier bag. I run the pump 10 hours a day, so it will save me about $70/year in electricity costs.
Was this helpful?
6
0
Extremely Powerful, Efficient 1amp Draw, Accurate 1200 GPH Flow Rating, Mesh Filter Bag Included
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I have a yard full of water features and this pump is the for the largest waterfall I'll be building to date. Rated at 1200gph at 5 feet of head, this pump delivers every single bit of it's rated flow. Lots of times pumps are rated at the pressure they can flow right at the pump itself only and it quickly drops off as height increases. Not so with this Total Pond pump. I tested this with an 8 inch spillway and 1 inch hose. It can accept up to 1 1/2 inch hose with it's adapter. With one inch hose you get a massive powerful flow at four feet of head pressure. A lot of assembly isn't required, this is ready to go as soon as you screw on the hose adapter. A 16 foot power cord lets you safely run the plug to your outlet far away from the water feature. This includes a mesh cover bag that will keep fine detritus and particles AND fish from getting caught in the pump. The pump also has a thick plastic final guard just in case a fish or frog get a bit too close. Once plugged and plumbed into your water feature, you'll be impressed with the power of this pump. I was actually surprised at the flow. Aside from the amazing power, this pump only draws 70W/1amp at 120v. That's pretty energy efficient and you'll appreciate it on your water bill. It has a built in handle that makes cleaning and locating the pump easy. If you have large water features and need a high flow pump, you can't go wrong with this selection.
Was this helpful?
17
0
Great for small pond
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I have a cascading pond design - there is a top portion and a bottom portion and a sloping rocky link between them. I am using Model Ll1200 GPH pump to bring the water from the bottom portion to Model A16575, the 8" spillway, at the top section. I am using Model DD11330 at the bottom section to create a vortex in the lower section. The top section contains an aquatic planting area using Model A16549 for lights and aeration.
Was this helpful?
2
0
Heavy Duty Pump !!!
Quality :
5
Value :
5
Seeds Program Review
(What's this)
This is a solid heavy duty pump, comes with an adapter so you can fit several different size outlets.. Very easy to use, just plug and play, as you can see from the pictures I used pvc pipe to plumb the waterfall splitting it into a tee at the top so I would have a wider flow. I laid out the piping first then built up the rocks around it. The recks are secured with construction adhesive and mortar, This pump puts out a solid steady flow to create a beautiful waterfall. Any beginner could easily tackle this job. It also comes with a net bag that fits around the pump to catch debris and filter the pond water.Its a sturdy solid well made pump that seems like it will last a lot of years;;
Was this helpful?
7
0
Works great, perfect for my little pond. I can't say it's throwing out 20 gallons per minute (120...
Works great, perfect for my little pond. I can't say it's throwing out 20 gallons per minute (1200 GPH), but it's adequate. It's pumping up about 3' through a columnar rock, with more of a dribble than a fountain. I would size up if you need a lot of flow.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers