29" H x 77" W Universal Miter Saw Stand with quick release mounts, extending work supports and solid rubber tires
$13899
Pay $113.99 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- At just 43 lbs. it's the perfect mix of portability and stability
- Folds up very compactly so it's easy to roll into your truck
- Quickly mount/remove saw with included toughbuilt mounts
- View More Details
Product Details
Specifications
Questions & Answers
12Questions
Q:Where is the product made?
by|Feb 28, 2023
1 Answer
Q:Can you store the tough built S510 upright with the saw attached, and show me a picture
by|Jul 15, 2022
2 Answers
Q:Has anyone stored this standing up with the saw attached?
by|Jun 9, 2022
1 Answer
Q:How is it with milwaukee fuel 12.5 inch mitter saw?
by|Dec 27, 2021
2 Answers
Showing 1-4 of 12
Feb 9, 2023
Professional Equipment
I was making a lot of mistakes & didn't know why. The reason, the Crown Moulding was not supported at the ends. The Toughbuilt helped me make clean cut with the extended ends. No more sagging ends & bad cuts. I'm a beginner but Toughbuilt makes me look like a professional. 5 Stars all the way.
by
Response from ToughBuiltFeb 13, 2023
Hi elchingonjoe, thank you for your comments; we are happy to see that we have accomplished your expectations. We design all of our products thinking about all our customer's needs.
Jan 8, 2023
Great stand !!
Great stand, ignore all the negative reviews, it’s not hard to assemble or maneuver, took me 15 min to put together, the secret is to leave it upside down and to not pull the legs out until after the wheels are on, as for moving around it’s fine with my Dewalt 715… maybe it’s harder with a big sliding compound. I would definitely purchase again.
by
Response from ToughBuiltJan 12, 2023
Hi Dman, Thank you for your comments; we are happy to see that we have accomplished your expectations. We design all of our products thinking about all our customer's needs.
Customer review from homedepot.caJan 28, 2021
I like it is not heavy im enjoying i recomen this product to everyone.
I like it is not heavy im enjoying i recomen this product to everyone.
by
Jan 18, 2021
Good miter stand design and can even be improved
Pros: Sturdy, well built, reasonably priced
Cons: The miter stand cannot be stored upright, which is important, especially for DIYers that only have small working space. I made a small modification to the design so that it can be stored upright with wheels on the ground, by welding a support brace and adding rubber footing to the end plate.
by
Customer review from homedepot.caMar 31, 2020
Bought this for Makita 12” sliding saw which a monster and weighs 65#. But this bench is not rea...
Bought this for Makita 12” sliding saw which a monster and weighs 65#. But this bench is not really adequate for such duty. Wheels are too close together and legs are too difficult to deploy. Should have gotten something bigger. ok this might be ok for a lesser saw
by
Dec 8, 2019
Okay for infrequent use, but not needed if it's infrequently used.
Wouldn't recommend for moving around with a saw, as is the intent behind this device. Light weight tubular construction, won't measure up to loading in and out of a truck multiple times without bending. If you're spending $300 on a saw to make accurate cuts, this isn't the matching product for the saw.
by
Sep 11, 2019
I bought a new Dewalt DWS779 12" sliding saw and wanted a stand for the saw. This appeared to be ...
I bought a new Dewalt DWS779 12" sliding saw and wanted a stand for the saw. This appeared to be a good value so I bought it. Once I set it up my saw I ran into a number of issues with the stand. I either had to modify my saw and or the stand. The issues I had were, the extension lock downs interfere with the saw handles, the handle for the stand was too tight with the bolt for the extensions and if you assemble the bolts to hold down the saw they interfered with the right miter stop.miter unless you cut them off. I also felt the unit was too low compared to my old Dewalt saw stand. Most of my issues were with the compatibility to my saw, other saws might not have the same issues
by
Response from ToughBuiltSep 12, 2019
Thank you for sharing your opinion, please note that in order to avoid having to modify, the TOUGHBUILT miter saw stands come with off set brackets to avoid having to modify even doe these miter saw stand are desinged to fit most miter saws on the market today.
Nov 20, 2018
Great stand. The rollers on each end really make it easy to cut long work. The stand is the right...
Great stand. The rollers on each end really make it easy to cut long work.
The stand is the right height for work. The legs are very secure.
The stand with my 12" dewalt saw rolls around real good. The only 2 complaints
I have is the folded up stand with the saw mounted will not stand up by itself.
Second the front handle is too short.
by
Mar 15, 2023
whats missing
wish it had come with a free margarita from Tequila Willy's....but otherwise, okish
by
Response from ToughBuiltMar 17, 2023
Hello Peter T Williqures!
We are sad about the three stars you give us! (We are good at making tools but not tequila). We suggest you not drink alcoholic beverages when using your mitter saw stand, as it can be somewhat risky for your operation.
We are sad about the three stars you give us! (We are good at making tools but not tequila). We suggest you not drink alcoholic beverages when using your mitter saw stand, as it can be somewhat risky for your operation.
Mar 2, 2023
Good miter saw table for a great price.
Strong and highly functional miter saw table for a very good price. The colors match my Dewalt saw nicely, and setup was easy, I would buy this again, and recommend to my friends.
by
Response from ToughBuiltMar 2, 2023
Hi Bill, thank you for taking the time to send this! We love to know that our customers enjoy what we do. Quality you can build on. We are #TOUGHBUILT
Frequently Bought Together
Price:
$13899
Explore More on homedepot.com
Flooring
Furniture
Paint
