Model # 24365

Internet #100194089

Store SKU #460247

Tapcon 3/16 in. x 2-3/4 in. Phillips-Flat-Head Concrete Anchors (75-Pack)
0092097243651

Tapcon

3/16 in. x 2-3/4 in. Phillips-Flat-Head Concrete Anchors (75-Pack)

  • Suitable for use in brick and concrete
  • Finished with a corrosion-resistant blue coating
  • The chisel finish allows for continuous driving
$16.82 / each
If you buy 2 or more
$14.30 / each

Choose Your Options

Package Quantity
75
Fastener length (in.)
2.75
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Suitable for use in brick and concrete
  • Finished with a corrosion-resistant blue coating
  • The chisel finish allows for continuous driving
As the original Concrete screw anchor that revolutionized the construction world, Tapcon brand Concrete anchors deliver the ease of use, superior precision and the unparalleled performance that professionals demand. Tapcon Concrete screw anchors draw from its unique ability to TAP its own threads into Concrete, making it an excellent alternative to expansion anchors, plugs and lag shields. Use Tapcon Concrete screw anchors for installing sill plates, electrical equipment, furring strips and many other applications that require fastening into brick, block or Concrete.
  • Works in all masonry-based material including concrete, block or brick
  • Use these screws for a variety of projects including fixing sill plates, electrical equipment, 2 ft. x 4 ft. and many other fixtures to masonry
  • Climaseal blue coating delivers long-lasting corrosion protection
  • Chisel edges accurately cut threads into concrete allowing for consistent driving performance and back holding power
  • Advanced thread form reduces installation torque by 30%, allowing for use in a wider range of materials
  • A reputation for quality, strength and ease of installation from industry professionals
  • Approved for use in ACQ treated lumber
  • Includes a free carbide-tipped Tapcon Drill Bit
  • To install, use a 5/32 in. carbide-tipped Tapcon drill bit to drill pilot hole
  • To install, use a 5/32 in. carbide-tipped Tapcon Drill Bit to drill pilot hole

Product Overview

  • Suitable for use in brick and concrete
  • Finished with a corrosion-resistant blue coating
  • The chisel finish allows for continuous driving
Model #: 24365
Sku #: 460247
Internet #: 100194089

As the original Concrete screw anchor that revolutionized the construction world, Tapcon brand Concrete anchors deliver the ease of use, superior precision and the unparalleled performance that professionals demand. Tapcon Concrete screw anchors draw from its unique ability to TAP its own threads into Concrete, making it an excellent alternative to expansion anchors, plugs and lag shields. Use Tapcon Concrete screw anchors for installing sill plates, electrical equipment, furring strips and many other applications that require fastening into brick, block or Concrete.

  • Works in all masonry-based material including concrete, block or brick
  • Use these screws for a variety of projects including fixing sill plates, electrical equipment, 2 ft. x 4 ft. and many other fixtures to masonry
  • Climaseal blue coating delivers long-lasting corrosion protection
  • Chisel edges accurately cut threads into concrete allowing for consistent driving performance and back holding power
  • Advanced thread form reduces installation torque by 30%, allowing for use in a wider range of materials
  • A reputation for quality, strength and ease of installation from industry professionals
  • Approved for use in ACQ treated lumber
  • Includes a free carbide-tipped Tapcon Drill Bit
  • To install, use a 5/32 in. carbide-tipped Tapcon drill bit to drill pilot hole
  • To install, use a 5/32 in. carbide-tipped Tapcon Drill Bit to drill pilot hole

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$14.77 /each
$16.82 /each
$18.94 /each
$24.98 /each
Name 3/16 in. x 2-1/4 in. Phillips-Flat-Head Concrete Anchors (75-Pack) 3/16 in. x 2-3/4 in. Phillips-Flat-Head Concrete Anchors (75-Pack) 1/4 in. x 1-3/4 in. Hex-Washer-Head Concrete Anchors (75-Pack) 1/4 in. x 3-1/4 in. Hex-Washer-Head Concrete Anchors (75-Pack)
Brand Tapcon Tapcon Tapcon Tapcon
Ratings (5) (6) (9) (3)
Finish Family Blue Blue Blue Blue
Fastener/Connector Material Steel Steel Steel Steel
Fastener length (in.) 2.25 2.75 1.75 3.25
Maximum Weight Capacity (lb.) 0 0 0 0
Package Quantity 75 75 75 75
Fastener Head Style Flat Flat Hex Hex
View Product View Product View Product View Product

Specifications

Dimensions

Assembled Depth (in.)
.1875 in
Assembled Height (in.)
2.75 in
Assembled Width (in.)
.1875 in
Fastener Diameter
3/16"
Fastener length (in.)
2.75

Details

Fastener Head Style
Flat
Fastener Plating
Polymer
Fastener Type
Masonry Anchor
Fastener/Connector Material
Steel
Finish Family
Blue
Indoor/Outdoor
Indoor/Outdoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
75
Primary Use
Fastening applications in concrete, block, and brick
Product Weight (lb.)
.016lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price.

Specifications

Dimensions

Assembled Depth (in.)
.1875 in
Assembled Height (in.)
2.75 in
Assembled Width (in.)
.1875 in
Fastener Diameter
3/16"
Fastener length (in.)
2.75

Details

Fastener Head Style
Flat
Fastener Plating
Polymer
Fastener Type
Masonry Anchor
Fastener/Connector Material
Steel
Finish Family
Blue
Indoor/Outdoor
Indoor/Outdoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
75
Primary Use
Fastening applications in concrete, block, and brick
Product Weight (lb.)
.016lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price.

Questions & Answers

what is the hole size

Asked by: Bear69
Use a 5/32 in. x 4-1/2 in. drill bit for this 3/16 in. x 2-3/4 in. Tapcon anchor. The minimum recommended anchor embedment is 1 in. The hole depth must be a minimum ¼” deeper than the anchor embedment to allow for displaced material
Answered by: CommunityAnswer
Date published: 2017-06-26

do you have small tapcon

do you have a tapcon smaller than 3/16th? I have a 3/16th, but it's too big for the hole in bracket I need to put up
Asked by: LB
A 3/16" diameter is the smallest diameter available for Tapcon anchors. If possible, open the bracket hole using a 1/4" diameter drill bit to allow clearance for the anchor. Thanks for your inquiry. For additional information about Tapcon anchors, please contact Customer Service at 877-489-2726 from 8:00 - 5:00 CT Monday - Friday.
Answered by: BrandAnswers
Date published: 2016-07-12

Product description says these are approved ACQ Treated Lumber. But lumber I bought at HomeDepot ...

Product description says these are approved ACQ Treated Lumber. But lumber I bought at HomeDepot is CA (Copper Azole). Do these fasteners approved for this type of pressure treated lumber?
Asked by: yas
  • y_2017, m_11, d_23, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_100194089, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/16 in. x 2-3/4 in. Phillips-Flat-Head Concrete Anchors (75-Pack) is rated 3.8 out of 5 by 6.
Rated 1 out of 5 by from Absolutely awful, I stopped the project I am in the middle of so I could review this product beca... Absolutely awful, I stopped the project I am in the middle of so I could review this product because it is so terrible. I have broken off 5 of the 9 screws I have tried to get in. It is not a big project as it is just screwing wire runways to a basement walk but I have broken off five heads of this screw in just nine tries. Pathetic
Date published: 2017-08-19
Rated 5 out of 5 by from Rotary hammer drill required These screws work great as long as you have the right tools for the job. A cordless hammer drill will not work for these screws at the 2 3/4 inch length. Save yourself the trouble and buy or rent a corded rotary hammer drill, it will save you a ton of time and make a much cleaner hole. These screws will strip the hole very quickly if you are not careful. Take your time when screwing them in and be careful not to over torque them. DO NOT use a ratcheting drill driver for these screws.
Date published: 2011-11-29
Rated 4 out of 5 by from the anchors are nice but the accompanying drill bit is not good; that would be good only for less... the anchors are nice but the accompanying drill bit is not good; that would be good only for less than 5 use/drilling.
Date published: 2017-05-17
Rated 5 out of 5 by from The product worked just like it should. Used 60 screws into a garage floor. The product worked just like it should. Used 60 screws into a garage floor.
Date published: 2017-05-02
Rated 5 out of 5 by from Treat very gently I agree with ModernTimercrafts review – you should get a hammer drill – go get a $25 drill from ”that store where you dock your boat” and use the supplied bit. And he’s right these have a very touchy “brake-away point” You can crank down on these and they’ll hold like gang-busters but just a little bit past that and “pop” - strips out and you’ll be drilling a new hole. It took me about 5-6 screws to get the finesse of it then I was off and running. I recommend you DO use an 18V ratcheting drill-driver to drive the screws! Having the clutch is the only way you have some guarantee the screws won’t strip out. For drilling the holes - the other reviewer is right – deeper holes should be left for an industrial hammer-drill. Also the Condrive500 installation tool is a waste for the same reasons – unless your hammer drill has a clutch you’ll strip out every screw. I had a cheap corded hammer drill w/o a clutch so a maybe that’s why it didn’t work right for me. I thought the tube had a torque limiter like torque extensions used for lug-nuts but it doesn’t - I ended up switching off two drills – slower but no striped screws. All in all these are great!
Date published: 2013-08-19
Rated 3 out of 5 by from Bit is Worthless The included bit lasted for exactly 2 holes before it was too dull to use any more. Save a headache and buy yourself a high quality bit for use with these Tapcons.
Date published: 2015-04-14
  • y_2017, m_11, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_100194089, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 192ms
  • REVIEWS, PRODUCT