#1 Home Improvement Retailer

Internet #100163075

Model #11247

Store SKU #367188

5/32 in. x 4-1/2 in. Steel Carbide Tip Masonry Drill Bit

$637
  • Compatible for use with 3/16 in. Tapcon concrete anchors
  • For use with jacobs chuck, keyed and keyless chuck hammer drills
  • Carbide tip delivers strength for drilling into tough materials
Store
0 in stock
Text to Me
How to Get It
caret

Product Details

Manufactured with tighter tolerances than ANSI standards. Tapcon Drill Bits are engineered to drill holes that deliver optimal performance when used with Tapcon Concrete Screw Anchors. Seamlessly use Tapcon Drill Bits with Tapcon anchors to ensure drilling precise holes and achieve maximum holding power.
  • Used for drilling pilot holes in masonry including concrete, block, and brick
  • Engineered to seamlessly work with Tapcon concrete screw anchors ensuring an accurate fit
  • Carbide tip increases strength and durability allowing for repeated use
  • Tight bit tolerance provides maximum anchor performance
  • Use with a hammer drill for best results
  • Use to install 3/16 in. Tapcon anchors
  • Also available in 3/16 in. Dia and 3-1/2 in. and 5-1/2 in. L
  • Tapcon Drill Bits are engineered to seamlessly work with Tapcon concrete screw anchors ensuring an accurate fit
  • Return Policy
caret

Specifications

caret

Questions & Answers

9Questions
caret
Q:How long should this bit last? I've drilled 10 holes in cinderblock & progress has slowed steadily. Do I need a new bit already?
by|Jul 1, 2022
1 Answer
Answer This Question

A:  Sounds like you are not using a hammer drill.  A hammer drill will make it last much longer, otherwise the heat will dull it faster

by|Jul 3, 2022
    caret
    Q:Will masonry drill bit work with a standard drill?
    by|Mar 29, 2021
    5 Answers
    Answer This Question

    A:  Yes. I used a DeWalt drill and drilled into cinder block. No problems.

    by|Apr 23, 2021

      A:  yes

      by|Jul 9, 2021

        A:  Yes. Have used them for years with my standard DeWalt drill/driver

        by|Mar 29, 2021

        A:  Yes

        by|Mar 24, 2022

        A:  Yes, most of the drill bit works with standard drill.

        by|Mar 30, 2021
          caret
          Q:Can I use this bit to drill into a 2x4?
          by|Jan 17, 2021
          4 Answers
          Answer This Question

          A:  Yes you can drill into a 2x4 with this bit, but your best choice would be a standard wood bit as this is a masonry bit for concrete, brick, etc. The wood bit will also give you cleaner drilled hole.

          by|Jan 17, 2021

          A:  Great for securing wood to concrete.

          by|Aug 28, 2021

          A:  The best out there!!

          by|Mar 31, 2021

          A:  No, you can not because this drill bit is for concrete only used in a hammer drill !!

          by|Mar 31, 2021
          caret
          Q:5/32 is .15625 this 5/32 drill measures .174, Why is that? no wonder why the 3/16 Tapcon screws ...
          by|Jan 16, 2020
          3 Answers
          Answer This Question

          A:  I didn’t measure the drill but itself, but it worked perfectly with the recommended Tapcon fasteners.

          by|May 25, 2022

          A:  I’m not sure but the only time i’ve had these screws not hold is when I over-tighten them.

          by|Jan 17, 2020

          A:  Fits in

          by|Jun 17, 2021
            Showing 1-4 of 9
            caret

            Customer Reviews

            4.1 out of 5
            (1,057)
            • 4.1
              out of 1,057 reviews
            • 66%recommend this product
            Filter by:
            Showing 1-10 of 1,057 reviews
            Fresh bits are a time saver
            I use Tapcon fasteners for all my concrete applications. I buy fresh bits for different jobs. The cleaner the hole, the better the grip. Fresh bits make the task easier.
            by
            • Verified Purchase
            • Recommended
            Tapcon ALWAYS
            I have used Tapcon fasteners for years. I always like to use fresh bits when drilling into poured concrete. After all, the hold it much better with properly drilled pilot holes. Many of the larger pack screws have a bit included however I feel a fresh bit is needed to finish all the fasteners in the package.
            by
            • Verified Purchase
            • Recommended
            Made job easy
            Roght tool makes the job mich easier..was pitting up motion tv mount to concrete block wall. 6 holes easy
            by
            • Verified Purchase
            • Recommended
            Used it to make holes for the tapcons that anchored my concrete forms.
            Used it to make holes for the tapcons that anchored my concrete forms.
            by
            • Verified Purchase
            Not performing as it should be!!
            Got this to drill 8 holes on tile/ concrete to install a handrail for my stair with 1/4 in. x 3-1/4 in. Hex-Washer-Head Concrete Anchors as recommended. About the 4th holes with my hammer drill, the bit tip is completely gone, had to go get another one to finish the job, the 2nd bit didn't work well when I get to the 8th hole. Finally get all 8 holes drill, clean the holes with compressed air, try to install the screw, but it was so tight that I can barely screw it in about 1-1/2", and when I try to go further, it cracked my porch tile!! Now I need to find a way to make the holes a bit wider in order to fit the screws without further damage my porch's tile!!
            by
              1 found this review helpful
              bit was bent. Wobbled horribly on first hole. Packaging was all in place so I think it was manu...
              bit was bent. Wobbled horribly on first hole. Packaging was all in place so I think it was manufactured poorly.
              by
              Response from PaslodeJul 27, 2020
              Thank you for sharing your feedback. We are sorry to hear that your experience with our product did not match your expectations. Please feel free to call us at (877) 489-2726 or email us at CS@itwbrands.com. We’d like to learn more about your experience and make things right.
                This drill bit did the job I purchased a cement block and wanted to keep a cactus statue on it. I...
                This drill bit did the job I purchased a cement block and wanted to keep a cactus statue on it. I drilled through the cement with this proper drill bit. It gets hot due to friction so let it cool between holes. Worked great!
                by
                • Verified Purchase
                • Recommended
                vinyl post install
                I bought this bit to install vinyl post ontop of concrete. This bit cut into the concrete with ease and no real effort. I was able to install my project very quickly utilizing this bit
                by
                  • Recommended
                  1 found this review helpful
                  Drill bit was perfect for what I needed it for. Item works exactly how described.
                  Drill bit was perfect for what I needed it for. Item works exactly how described.
                  by
                  • Verified Purchase
                  • Recommended
                  Very strong bot it does the job just use hammer drill for best results
                  Very strong bot it does the job just use hammer drill for best results
                  by
                  • DIY
                  • Verified Purchase
                  • Recommended
                  Showing 1-10 of 1,057 reviews

                  Frequently Bought Together

                  +
                  +
                  Price:
                  $637