#1 Home Improvement Retailer

Internet #100136421

Model #21512

Store SKU #185269

#8 x 1-1/4 in. Fine Zinc-Plated Steel Phillips Truss-Head Sharp Point Lath Screws (140-Pack)

$1223
  • Secure metal to metal fastening without the need to pre-drill
  • Engineered for applications requiring a wide, low-profile head
  • Drill, tap, and fasten in one motion
Store
0 in stock
Text to Me
caret

Product Details

Teks #8 x 1-1/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Sharp-Point Lath Screws (140-Pack) provide secure metal-to-metal fastening with strong holding power, without the need to pre-drill. Sharp self-piercing point is ideal for fastening metal to metal (26-Gauge to 22-Gauge) or metal to wood in applications such as attaching metal lath to wood or steel studs for stucco/plaster applications, attaching pre-drilled metal brackets to wood or any application requiring a wide, low-profile head. Install with a standard screw gun and a #2 Philips drive bit.
  • Ideal for thinner metal to metal applications (26-Gauge to 22-Gauge) or metal to wood applications
  • Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
  • Engineered for applications requiring a wide, low-profile head
  • Zinc plated finish protects the job's appearance
  • Drill, tap and fasten in 1 motion
  • Highly versatile
  • Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
  • No pre-drilling necessary
  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

14Questions
caret
Q:Would these work to attach metal to a Trex composite deck board (for a planter)
by|Dec 7, 2022
1 Answer
Answer This Question

A:  Yes, it'll go through thin metal and hold into the decking if it's holding a hanger. Not likely to hold the planter to the decking directly.

by|Dec 10, 2022
    caret
    Q:Can I use these with wood
    by|May 5, 2022
    1 Answer
    Answer This Question

    A:  Yes, this screw works great for attaching metal lath to wood or steels studs or to attach pre-drilled metal brackets to wood.

    by|Aug 15, 2022
      caret
      Q:%3Cmarquee%20loop=1%20width=%271%26apos;%27onfinish=self[`al`+`ert`](1)%3E%23leet%3C/marquee%3E
      by|Mar 15, 2022
      0 Answer
      Answer This Question
      caret
      Q:These are zinc plated, can they be used exterior?
      by|Sep 7, 2020
      1 Answer
      Answer This Question

      A:  Hi JJN, the zinc plating provides minimal protection against corrosion for exterior applications. Pending on the expsoure of the fastner to the elements, we recommend using a fastener with a corrosion resistant coating for your application.

      by|Sep 8, 2020
        1 found this answer helpful
        Showing 1-4 of 14
        caret

        Customer Reviews

        4.7 out of 5
        (806)
        • 4.7
          out of 806 reviews
        • 89%recommend this product
        Filter by:
        Showing 1-10 of 806 reviews
        Good price, the right length, strong holding power!!...
        Good price, the right length, strong holding power!!
        by
        • Verified Purchase
        Excellent screws for electrical work....
        Excellent screws for electrical work.
        by
        • Verified Purchase
        These were exactly what we needed to screw a marine vinyl cover onto a workout bench with out tea...
        These were exactly what we needed to screw a marine vinyl cover onto a workout bench with out tearing the fabric.
        by
        • DIY
        • Verified Purchase
        • Recommended
        I used the screws to frame metal studs - Barbecue island and they worked grate.
        I used the screws to frame metal studs - Barbecue island and they worked grate.
        by
        • Verified Purchase
        • Recommended
        Working great holdings up the lattice I put across my front porch and them being zink plated shou...
        Working great holdings up the lattice I put across my front porch and them being zink plated shouldn't rust any time soon
        by
        • Verified Purchase
        • Recommended
        I used these screws to attach my corrugated metal. The...
        I used these screws to attach my corrugated metal. The heads were slotted well and had no slipping with drilling through the layered materials. Excellent purchase
        by
        • Verified Purchase
        These screws seem well made, and suited my purposes well. I used them to secure drawer slides to ...
        These screws seem well made, and suited my purposes well. I used them to secure drawer slides to my drawers. The head is a bit larger than others I’ve used, so where there is limited space, the head will be too large. I also used them to secure drawer bottoms to the drawer at the rear.
        by
        • DIY
        • Verified Purchase
        • Recommended
        I purchased these to install fence rails to metal posts for a new fence. The rail company recomme...
        I purchased these to install fence rails to metal posts for a new fence. The rail company recommends a #10 but these seem to be working well. They work into wood easily The heads are made of hard enough steel to be driven with a cordless drill without stripping out. I made sure to use the proper sized bit. Overall, I’m happy with how well these worked.
        by
        • DIY
        • Recommended
        crap screws
        The heads keep popping off the screws after a week of being installed there are still heads popping off upon further inspection I find that the slot for the philips head goes all the way into the shank of the screw making the shank at the head very thin I don't know if this is bad batch or of this is the way they make them now I will have to think hard before I use these again
        by
        Response from PaslodeMay 20, 2020
        Thank you for sharing your feedback. We are sorry to hear that your experience with our product did not match your expectations. Please feel free to call us at (877) 489-2726 or email us at CS@itwbrands.com. We’d like to learn more about your experience and make things right.
          1 found this review helpful
          These screws work well in wood with no predrilling. Excellent for mounting hardware cloth.
          These screws work well in wood with no predrilling. Excellent for mounting hardware cloth.
          by
          • Verified Purchase
          • Recommended
          Showing 1-10 of 806 reviews

          Frequently Bought Together

          +
          +
          Price:
          $1223

          Compare Similar Self-Drilling Screws

          current product
          #8 x 1-1/4 in. Fine Zinc-Plated Steel Phillips Truss-Head Sharp Point Lath Screws (140-Pack)
          #8-15 x 2 in. Philips Pan Head Sharp Point Lath Screw (100-Pack)#8 x 1/2 in. Zinc-Plated Steel Phillips Truss-Head Drill Point Lath Screws (260-Pack)#8-15 x 1 in. Philips Pan Head Sharp Point Lath Screw (510-Pack)
          BrandTeksTeksTeksTeks
          Name#8 x 1-1/4 in. Fine Zinc-Plated Steel Phillips Truss-Head Sharp Point Lath Screws (140-Pack)#8-15 x 2 in. Philips Pan Head Sharp Point Lath Screw (100-Pack)#8 x 1/2 in. Zinc-Plated Steel Phillips Truss-Head Drill Point Lath Screws (260-Pack)#8-15 x 1 in. Philips Pan Head Sharp Point Lath Screw (510-Pack)
          Price
          $1257
          $1257
          $1327
          $2677
          Ratings
          (805)
          (805)
          (836)
          (805)
          Screw Length1-1/4 in2 in1/2 in1 in
          Size#8#8#8#8
          Head StyleTruss HeadTruss HeadTruss HeadTruss Head
          Drive StylePhillipsPhillipsPhillipsPhillips
          Fastener/Connector MaterialSteelSteelSteelSteel
          FeaturesCoated,Self DrillingCoated,Self DrillingCoated,Self DrillingCoated,Self Drilling
          View ProductView ProductView ProductView Product