#1 Home Improvement Retailer

Internet #100175766

Model #21524

Store SKU #186687

#8 x 3/4 in. Zinc Plated Steel Philips Drill Truss-Head Point Lath Screws (200-Pack)

$1178
  • Secure metal to metal fastening without the need to pre-drill
  • Engineered for applications requiring a wide, low-profile head
  • Drill, tap, and fasten in one motion
Store
0 in stock
Text to Me
caret

Product Details

Use the Teks #8 x 3/4 in. Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (200-Pack) to securely fasten 20-Gauge - 12-Gauge metal in stucco/plaster and other metal-to-metal fastening applications without needing to pre-drill. The screws feature engineered drill points and flutes that remove material efficiently and properly size the hole for threads. Install with a standard screw gun and a #2 Phillips-drive bit (not included).
  • Ideal for thicker metal to metal applications (20-Gauge to 12-Gauge) or metal to wood applications
  • Great for attaching metal lath to wood or steel studs for stucco and plaster applications and for attaching pre-drilled metal brackets to wood
  • Engineered for applications requiring a wide, low-profile head
  • Zinc plated finish protects the job's appearance
  • Drill, tap and fasten in 1 motion
  • Highly versatile
  • Common project applications: roofing, HVAC, steel stud framing, gutters and register vents
  • No pre-drilling necessary
  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

17Questions
caret
Q:It takes a lot of effort to through a metal stud. Any recommendation?
by|Nov 21, 2022
1 Answer
Answer This Question

A:  Hello! Can you please provide more detail on what thickness you are going through? From there, we can provide more feedback on the best-suited fastener.

by|Dec 23, 2022
    caret
    Q:can i use this to hold up to 20lbs on a hook?
    by|Jun 27, 2020
    2 Answers
    Answer This Question

    A:  If used correctly and screwed into steel, this fastener should hold many times the weight you are suggesting.

    by|Jun 28, 2020

    A:  No

    by|Jun 28, 2020
    caret
    Q:Can I anchor a metal plate to wood with this screw?
    by|May 20, 2020
    4 Answers
    Answer This Question

    A:  Hi Dean, this is Scott from the Teks product team. We recommend using our sharp point version (#21504 or 21506) for attaching up to 20 Gguge thick metal to wood.

    by|Jun 23, 2020
      1 found this answer helpful

      A:  Yes but this is to small 3/4 screw how much weight need handle that anchor

      by|May 24, 2020

      A:  no problem . I like to use the sharp point rather then the drill points in wood. If PT I would use a coated screw instead.

      by|May 22, 2020

      A:  You actually have this backwards ... the teeth of this screw grab very well into metal (and not wood). Look for a screw that grabs wood and you should be in good shape.

      by|Jun 23, 2020
      caret
      Q:how many screws per pound?
      by|Mar 10, 2020
      1 Answer
      Answer This Question

      A:  There is approximately 180 screw per pound.

      by|Mar 11, 2020
        Showing 1-4 of 17
        caret

        Customer Reviews

        4.6 out of 5
        (841)
        • 4.6
          out of 841 reviews
        • 90%recommend this product
        Filter by:
        Showing 1-10 of 841 reviews
        Great time saver
        Made quick work of my project. No pre-drilling needed. Held my studs securely
        by
        • Verified Purchase
        • Recommended
        We were installing vinyl beaded soffit over sheetrock inside a restaurant as a wainscot. The scre...
        We were installing vinyl beaded soffit over sheetrock inside a restaurant as a wainscot. The screes worked perfectly to hold everything secure!
        by
        • Verified Purchase
        • Recommended
        Easy to work with, they look nice with the metal roof.
        Easy to work with, they look nice with the metal roof.
        by
        • Verified Purchase
        • Recommended
        Nice product
        Nice product
        by
        • Verified Purchase
        • Recommended
        Worked great for my project
        Worked great for my project
        by
        • Verified Purchase
        • Recommended
        it does what it's made to do! used it to make a flower bed and it turned out great. I like that t...
        it does what it's made to do! used it to make a flower bed and it turned out great. I like that the head was a little wider so it didn't go all the way through the thinner corner peices.
        by
        • Verified Purchase
        • Recommended
        I purchased these to attach foam insulation to a interior garage door. They worked extremely w...
        I purchased these to attach foam insulation to a interior garage door. They worked extremely well, very sharp and penetrated the alum/steel easily with little effort. I am sure I will find a lot of other uses for this product.
        by
        • Verified Purchase
        • Recommended
        Great Item, saved the day. I was installing chicken wire to use as a gutter guard to keep the l...
        Great Item, saved the day. I was installing chicken wire to use as a gutter guard to keep the leaves from clogging the super gutter. see picture below. This had a wide enough head to grab it, make it's own hole and finally keep the chicken wire from coming up. I just had to figure out how I can do this, and did it.
        by
        • Recommended
        3 found this review helpful
        Excellent Zinc plated self tapping screws.
        The Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws provide secure metal to metal fastening and strong holding power without the need to pre-drill. It can be installed with a standard screw gun and a #2 Phillips-drive bit or screw driver. It can also be used on wood, and looks beautiful and has secure fastening with strong holding power. This self tapping screws are Zinc plated and works very well.
        by
        • DIY
        • Recommended
        Excellent Fasteners
        In hardware as in life, there is nothing better than a----a----a good fastener! Excellent
        by
        • Verified Purchase
        Showing 1-10 of 841 reviews

        Frequently Bought Together

        +
        +
        Price:
        $1178

        Compare Similar Self-Drilling Screws

        #10 x 3/4 in. External Hex Flange Hex-Head Self-Drilling Screws (150-Pack)
        current product
        #8 x 3/4 in. Zinc Plated Steel Philips Drill Truss-Head Point Lath Screws (200-Pack)
        #8 x 1/2 in. Zinc-Plated Steel Phillips Truss-Head Drill Point Lath Screws (260-Pack)#8-15 x 1 in. Philips Pan Head Sharp Point Lath Screw (510-Pack)
        BrandTeksTeksTeksTeks
        Name#10 x 3/4 in. External Hex Flange Hex-Head Self-Drilling Screws (150-Pack)#8 x 3/4 in. Zinc Plated Steel Philips Drill Truss-Head Point Lath Screws (200-Pack)#8 x 1/2 in. Zinc-Plated Steel Phillips Truss-Head Drill Point Lath Screws (260-Pack)#8-15 x 1 in. Philips Pan Head Sharp Point Lath Screw (510-Pack)
        Price
        $1267
        $1337
        $1337
        $2677
        Ratings
        (1468)
        (841)
        (841)
        (809)
        Screw Length3/4 in3/4 in1/2 in1 in
        Size#10#8#8#8
        Head StyleFlange HexTruss HeadTruss HeadTruss Head
        Drive StyleExternal HexPhillipsPhillipsPhillips
        Fastener/Connector MaterialSteelSteelSteelSteel
        FeaturesCoated,Self DrillingCoated,Self DrillingCoated,Self DrillingCoated,Self Drilling
        View ProductView ProductView ProductView Product