#1 Home Improvement Retailer
Home
Heating, Venting & Cooling
HVAC Supplies
Ducting & Venting
Flexible Ductwork

Internet #

203767553

Model #

0563-1000-0001

KM 10 in. x 25 ft. HVAC Ducting- R8.0

(10)Questions & Answers (9)
$5396
/box
Apply Now
Pay $28.96 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Designed for use with medium to low-pressure systems
  • Corrosion-resistant steel wire core ensures prolonged use
  • R-8 fiberglass insulation helps reduce heating and cooling cost
  • View More Details
caret

Product Details

Strong polyester film laminated and encapsulating a heavy, corrosion resistant steel wire helix, forms the inner core. And supports a thick blanket of fiberglass insulation. The outer vapor barrier is a new bi-directional reinforced metalized vapor barrier which will not unravel.
  • Reduced total installation cost - fast, economical installation
  • Meets UL 181 and NFPA 90A-90B fire codes
  • Superior insulation and thermal performance
  • Easily shaped to fit over all inlets and quickly connects to fast fittings
  • Unique construction will not unravel when cut
  • Smooth air tight inner core of polyester is designed for low to medium pressure systems
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

9Questions
caret
Q:Will this work for an outdoor kitchen hood vent?
by|Nov 6, 2022
0 Answer
Answer This Question
caret
Q:Would it be advisable to buy a duct cover one inch larger than the ductwork to make installation ...
by|Feb 26, 2019
1 Answer
Answer This Question

A:  No, there is not a need to buy a larger size. This 6 in. cover fits nicely over the 6 in. duct. In my case, the fan duct at one end splayed outward a bit after the 3 in. connecting spot, and I sliced the last inch of duct cover to extend it to a longer connection over the splayed duct, then covered the joint thoroughly with the required tape. Be sure to use the appropriate UL listed duct tape, not just a normal tape.

by|Mar 5, 2019
caret
Q:I'm looking for a 6" duct for fireplace combustion air. The duct would connect to galvanized ste...
by|Jan 29, 2019
2 Answers
Answer This Question

A:  No, you need something rated for a wood stove, typically black pipe or stainless steel. https://www.homedepot.com/p/DuraVent-DuraBlack-6-in-x-48-in-Single-Wall-Chimney-Stove-Pipe-6DBK-48/202269771 Galvanized steel emits a deadly gas when heated and should not be used for a chimney pipe. If you are lining an old fireplace to have a wood stove insert I would suggest searching for a 6” stainless steel flexible stove pipe, normally costs around 15-20 per ft length.

by|Feb 23, 2019

    A:  Will this install be on the lead in side of the fireplace or outlet of hot forced air. If on the outlet this material would not withstand the heat from the unit. A better solution would be our Everclean product with the coated fiberglass cloth inner liner.

    by|Feb 15, 2019
      caret
      Q:Is the overall diameter of this product 6”, because on the specifications the width and height ar...
      by|Dec 26, 2018
      2 Answers
      Answer This Question

      A:  The inside black tubing is 6” for 6” connections. The sheathing adds a little over an inch all around. I’m not in the HVAC field, just a do-it-yourselfer. I found this product very flexible.

      by|Dec 26, 2018

        A:  The diameter is 6 inches. Your remaining question cannot be answered at this time.

        by|Dec 26, 2018
          Showing 1-4 of 9
          caret

          Customer Reviews

          4 out of 5
          (10)
          • 4
            out of 10 reviews
          • 75% recommend this product
          Filter by:
          Showing 1-10 of 10 reviews
          Sep 30, 2014
          Flex Duct First Timer
          I used to add supply and return to attic bedroom. Easy to use, cut and install. Outer jacket was tough enough that I didn't worry about assembly outside the knee wall and dragging through the access door. After reading all about the draw backs of flex duct I did use ridge wall connectors at ends and any turns. Final result air flow is excellent to attic.
          by
          • DIY
          4 found this review helpful
          Sep 30, 2014
          Flex Duct first timer
          I used to add supply and return to attic bedroom. Easy to use, cut and install. Outer jacket was tough enough that I didn't worry about assembly outside the knee wall and dragging through the access door. After reading all about the draw backs of flex duct I did use ridge wall connectors at ends and any turns. Final result air flow is excellent to attic. Showing 8 inch in the photo - but same construction.
          by
          • DIY
          • Recommended
          1 found this review helpful
          Apr 18, 2019
          Not As Pictured. Not even close to what is depicted in the pictures of the product, including on...
          Not As Pictured. Not even close to what is depicted in the pictures of the product, including on the Thermaflex web site. I was hoping to find tightly wrapped ducting for my specific application, which I thought I had found with this product, per the picture displayed (silver is not loose at all, etc.). Plus, the seemingly compressed pink fiberglass was a plus and the inside black layer did not appear to be loose, thus a positive for the air flow that I needed. This product is primarily the same as the others I could have gotten off the shelf and would have already started my project. Silver exterior is very loose and ripplely, the fiberglass is the same "fuzzy" type as others, and the inside layer is not smooth / is loose, despite the picture. Perhaps the strength of the components May be better, but was not part of my criteria. Again, I recommend others just get another brand off the shelf at Home Depot instead of ordering and waiting for this to arrive.
          by
            1 found this review helpful
            Feb 27, 2019
            replaced a 25 foot r6 with a 5 deg diff,...
            replaced a 25 foot r6 with a 5 deg diff, now 1.5 deg diff. Check your ac vents with an inferred thermometer ($20), and replace if malfunctioning
            by
            • Verified Purchase
            Dec 28, 2018
            Was as expected ...
            Was as expected
            by
            • Verified Purchase
            Sep 11, 2018
            I hope it it’s better have not installed it yet...
            I hope it it’s better have not installed it yet 1 Star for now
            by
            • Verified Purchase
            1 found this review helpful
            Nov 1, 2017
            This is a *cautious* recommendation for the Thermaflex KM 6 in. x 25 ft. R8 HVAC Ducting. The pro...
            This is a *cautious* recommendation for the Thermaflex KM 6 in. x 25 ft. R8 HVAC Ducting. The product itself is exactly as offered. The reason for my caution is that I only needed six feet, but HD or Thermaflex only offers this in a 25 ft. length. I would be very happy to pay half as much for a 6-10 foot length. 19 feet of wasted ducting does me little good.
            by
            • Verified Purchase
            • Recommended
            3 found this review helpful
            Oct 24, 2017
            Great product. Easy to install...
            Great product. Easy to install
            by
            • Verified Purchase
            Oct 4, 2017
            4 Star Review
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            Sep 22, 2015
            Super satisfied!
            Everything I expected this product to do, and more
            by
              • Recommended
              Showing 1-10 of 10 reviews