Internet #203993068

Model # 36FF120-10

0856616004372

10 ft. x 36 in. 120-Volt Floor Heating Film (Covers 30 sq. ft.)

  • Factory attached wires efficiently connect to 120-volt source
  • Hermetically sealed lead wires offer an airtight fit to the film
  • Flexible carbon film allows flush mounting for a seamless finish
$ 196 25
Loading Options

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Factory attached wires efficiently connect to 120-volt source
  • Hermetically sealed lead wires offer an airtight fit to the film
  • Flexible carbon film allows flush mounting for a seamless finish
WarmFilm is designed for fast and easy installation under floating laminate, engineered wood and wood floors - without cement. WarmFilm is ideal for new construction or when remodeling to make any room in the house cozier and more comfortable. Use WarmFilm to heat or supplement any room, addition or basement. Installing a warm floor couldn’t be easier. Select the mat lengths that best fit your room. Simply roll out WarmFilm mats on a suitable underlayment, cover with a moisture barrier, lay the floor and connect to the thermostat and power. If needed, the mats can be cut to length on site with household scissors. There are no heating wires to accidentally cut or short-circuit. No step-down transformers, on-site splice connections or special tools are required. Underlayment and moisture barriers are purchased separately.
  • Standard mat widths and lengths are stocked for immediate shipment and easy on-site fitting to any floor
  • Combine multiple mats to fit your desired heated area up to 160 sq. ft. per thermostat (purchased separately)
  • Add a power module (purchased separately) to increase your heated area in increments up to 160 sq. ft. each
  • Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
  • Lead wires on only one end of the mat facilitate mat layout and installation
  • Ultra-thin film limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment (purchased separately)
  • Installs over most underlayments including synthetic cork (brand name Cerazorb), natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers (brand name Insulayment)
  • Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
  • Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
  • Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
  • Assembled in the USA
  • Click here for more information on Electronic Recycling Programs

Product Overview

  • Factory attached wires efficiently connect to 120-volt source
  • Hermetically sealed lead wires offer an airtight fit to the film
  • Flexible carbon film allows flush mounting for a seamless finish
Model #: 36FF120-10
Internet #: 203993068

WarmFilm is designed for fast and easy installation under floating laminate, engineered wood and wood floors - without cement. WarmFilm is ideal for new construction or when remodeling to make any room in the house cozier and more comfortable. Use WarmFilm to heat or supplement any room, addition or basement. Installing a warm floor couldn’t be easier. Select the mat lengths that best fit your room. Simply roll out WarmFilm mats on a suitable underlayment, cover with a moisture barrier, lay the floor and connect to the thermostat and power. If needed, the mats can be cut to length on site with household scissors. There are no heating wires to accidentally cut or short-circuit. No step-down transformers, on-site splice connections or special tools are required. Underlayment and moisture barriers are purchased separately.

  • Standard mat widths and lengths are stocked for immediate shipment and easy on-site fitting to any floor
  • Combine multiple mats to fit your desired heated area up to 160 sq. ft. per thermostat (purchased separately)
  • Add a power module (purchased separately) to increase your heated area in increments up to 160 sq. ft. each
  • Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
  • Lead wires on only one end of the mat facilitate mat layout and installation
  • Ultra-thin film limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment (purchased separately)
  • Installs over most underlayments including synthetic cork (brand name Cerazorb), natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers (brand name Insulayment)
  • Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
  • Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
  • Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
  • Assembled in the USA
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand FloorHeat ThermoSoft QuietWarmth ThermoSoft
Name 7 ft. x 36 in. 110-Volt Radiant Floor Heating System (Covers 21 sq. ft.) 10 ft. x 36 in. 120-Volt Floor Heating Film (Covers 30 sq. ft.) 10 ft. x 36 in. 120-Volt Peel and Stick Radiant Floor Heating Mat for Tile and Glue-Down Floors (Covers 30 sq. ft.) 25 ft. x 18 in. 120-Volt Floor Heating Film (Covers 37.5 sq. ft.)
Price
$120.75
$196.25
$268.06 /roll
$286.71
Ratings (1) (4) (55) (4)
Voltage (volts) 110 120 120 120
View Product View Product View Product View Product

Specifications

Dimensions

Product Length (ft.)
10 ft
Product Thickness (in.)
.01 in
Product Width (in.)
18

Details

Flooring Product Type
Underfloor Heating
Material
Flexible Carbon Film
Product Weight (lb.)
2.4lb
Returnable
180-Day
Total Square Footage Covered
15
Voltage (volts)
120
Wattage (watts)
330

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
10 year

Specifications

Dimensions

Product Length (ft.)
10 ft
Product Thickness (in.)
.01 in
Product Width (in.)
18

Details

Flooring Product Type
Underfloor Heating
Material
Flexible Carbon Film
Product Weight (lb.)
2.4lb
Returnable
180-Day
Total Square Footage Covered
15
Voltage (volts)
120
Wattage (watts)
330

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
10 year

Questions & Answers

Will this work out side on a deck?

Will this work out side on a deck?
Asked by: dorset58
the product details state it is for interior use only so would assume not. this is for radiant heat flooring, for permanent installation underneath floating laminate or tile flooring.
Answered by: wrkoutgrl1
Date published: 2016-11-28

Can you put this under tile? Will it get hot enough

Asked by: Michael
This product can only be installed under floating floors. There are floating tile options tile like SnapStone. The temperature question is hard to answer without knowing what you consider to be "hot enough".
Answered by: Thermosoft Product Expert
Date published: 2018-12-13

Can I use this under carpet that is on concrete on an enclosed sun porch?

Can I use this under carpet that is on concrete on an enclosed sun porch?
Asked by: Sandra
Yes, this product can be used, however you might not feel the heat through the carpet.
Answered by: Communityanswer
Date published: 2018-11-16

Can it be used under ceramic tile

Asked by: Nup
No, this unit is for use with floating flooring installations.
Answered by: Communityanswer
Date published: 2018-03-20
  • y_2020, m_9, d_21, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_52
  • loc_, sid_203993068, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • QUESTIONS, PRODUCT