#1 Home Improvement Retailer

Internet #100540359

Model #J-S-93

Store SKU #527195

Store SO SKU #100415

Super S 7 ft. 9 in. Jack Post

  • Corrects sagging floors, decks and offers secondary support
  • Handles compression load up to 18,000 lbs.
  • Easily adapts steel nut to a 3/4 in. open-end/adjustable wrench
  • View More Details
Store
0 in stock
Text to Me

Product Overview

The Tiger Brand Jack Post Super S 7 ft. 9 in. Jack Post can adjust from a 4 ft. 6 in. to 7 ft. 9 in. It has a compression load range of 18,000 lbs. at its lowest setting and 9,100 lbs. at its highest setting. It is ideal for correcting sagging floors and basement beams and providing-secondary support for room additions, remodeling projects, porches and decks.
  • Strong galvanized plates
  • 4 ft. 6 in. to 7 ft. 9 in. adjustment range
  • Corrects sagging floors, supports basement beams, takes weight off large furniture or appliances
  • Compression load range - 18,000 lbs. to 9,100 lbs.
  • Double carriage bolts and nuts
  • Flush adjusting steel nut with self-centering pilot into the tube
  • Positive locating holes
  • Adjusts easily with a 3/4 in. open-end or adjustable wrench

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Maximum Height (in.)
93 in
Minimum Height (in.)
54.0
Product Depth (in.)
3
Product Height (in.)
93
Product Width (in.)
4

Details

Features
No Additional Features
Hardware Included
Hardware Included
Maximum load at maximum extension (lb.)
9100
Maximum load at minimum extension (lb.)
18000.0
Product Weight (lb.)
16
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Tiger Brand Jack Post Limited Warranty; warrants to the original purchaser that its products are free from defects in material and workmanship under normal use and service for one year from the date of purchase.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.6
    out of 189 reviews
  • 94% recommend this product
Filter by:
Showing 1-10 of 189 reviews
Worked great!
Worked great!
by Basement
  • Verified Purchase
  • Recommended Product
Removed studs and drywall in basement, but kept the ceiling...
Removed studs and drywall in basement, but kept the ceiling . Used 8 of these to support ceiling, which worked great - easy to adjust. Excellent remedy! Very Happy!
by ANDREW
  • Verified Purchase
These jack posts were just the ticket! I needed to place a temporary beam in my kitchen so I coul...
These jack posts were just the ticket! I needed to place a temporary beam in my kitchen so I could repair some water damaged joists in the Kitchen Ceiling. After looking around and comparing what was available I found these at about a quarter of the price as the competitions. They were easy to assemble and get placed and are holding the joists in place nicely while I work on the floor above.
by Handy4u59
  • DIY
  • Verified Purchase
  • Recommended Product
1 person found this helpful
I purchased 5 of these Jack Posts. Doing a repair on my basement, I had 1 26 ft. wall that had b...
I purchased 5 of these Jack Posts. Doing a repair on my basement, I had 1 26 ft. wall that had buckled and was being supported by the stairs. My mason assisted us to open several holes in the wall and support the weight of the house with 4x4's and the jack posts. Now the wall is out and is supported partially with these posts. The wall will go back in yet this month. They worked quite well and were adjustable to the height needed at the time.
by Ron
  • Verified Purchase
  • Recommended Product
Easy to assemble, works great.
Easy to assemble, works great.
by bob
  • Verified Purchase
  • Recommended Product
1 person found this helpful
The Tiger Brand Jack Post were very reasonable in cost and provided the support required to get t...
The Tiger Brand Jack Post were very reasonable in cost and provided the support required to get the job done. The original/existing cross beam and support to the upper floor joist had deteriorated and required replacement. The Tiger Brand Jack Post were very easy to install and adjust in height to support the new 4"X4" cross beam. Nothing to dislike about this product. Just installed this product. This product exceeded expectations.
by Ronodix
  • Verified Purchase
  • Recommended Product
easy to use my one improvement would be to have the top and bottom plates secure to the post, h...
easy to use my one improvement would be to have the top and bottom plates secure to the post, had to have someone hold those in while tightening up the threads
by Magic
  • Verified Purchase
  • Recommended Product
1 person found this helpful
I would have liked the top and bottom plate to be a little heavier gauge and the bottom plate to ...
I would have liked the top and bottom plate to be a little heavier gauge and the bottom plate to have attached better. But, overall, I really liked the product. I have plans to install two more jacks, and I intend to use the Tiger brand again.
by Mike
  • DIY
  • Verified Purchase
  • Recommended Product
1 person found this helpful
Extremely easy to adjust and install. Great value for little cost. The original jack post (inst...
Extremely easy to adjust and install. Great value for little cost. The original jack post (installed in 1984) in our garage rusted out from the inside out and failed. I quickly purchased 3 new posts from Home Depot, replaced the old and installed all three for additional support at a cost of $150. Total purchase and repairs were completed in the same day in just 2 hours.
by JR
  • Verified Purchase
  • Recommended Product
3 people found this helpful
Low grade jack for sale
Mind you this stays in place most of the time, forever. A bit pricey. First, adjuster holes are on the larger outside tube (never seen that before) not as depicted on box. Second, material of tube and plate is scary thin, where factory punched out adjuster holes the tube is bulged all around. Third, the threaded pin bolt (not carriage) is smaller in diameter than punched holes and you need a pipe wrench to hold round head while a crescent wrench tightens nut. Forth they pressed flat spots in the adjuster screw that you will have to have a 3/4" open end wrench handy (no pin rod through a hole). Fifth the base and top plates are very thin. I watched video on the use and not understanding why you would put the screw on the bottom (no control to hold it from tipping and falling and rust the threads from floor moisture), video discussed it was stronger to put it in upside down, It's the same weight either way. No way would I put 18,000 lbs on the smallest adjustment. Engineering nightmare. Pretty looking when all done, wallet is a lot lighter too. 3 different wrenches, a level and a step stool are needed.
by PHnoD
  • DIY
12 people found this helpful
Showing 1-10 of 189 reviews