Store SKU #
A: It is difficult to determine a fix from this description. Please call the Titebond Technical Support Group at 1-800347-4583 between 8:00 am and 5:00 pm EST. Titebond Original will bond wood to wood and will also bond the metal screw to wood. In some cases, damaged wood will need to be repaired before the screw will have a stable place to bond. Coat Titebond Original around a few toothpicks and stick them in the screw hole, then cut them flush to the surface. This can help to stabilize the wood around the screw hole. wait for an hour then re-assemble the chair making sure not to overtighten the screw. Allow 24 hours before stressing the joint.
A: No, Titebond Original, Titebond II or Titebond III does not contain methyldibromo glutaronitrile.
A: Best to use Titebond Melamine Glue which was designed for this particular application.
A: Yes, Titebond Original can be used for veneers. If you don't have a press, you can also use Titebond Original as an iron-on-veneer adhesive. To do this, apply adhesive on both the back side of the veneer and on the substrate and allow it to dry. Then take an iron on cotton setting and working from the middle to the edges, bond the veneer. Use a brown paper bag as a cover to keep the iron from scorching the veneer.