The TripleGrip is 1 of the most technologically advanced anchor on the market. It is designed with 2 expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced Cam Action technology expands, thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted. Available in #6, #8, #10 and #12.

Easy to install
Superior holding power
2 expandable wings that grips tight behind drywall
2 lateral wings holds the anchor in place
Cam action expands inside drywall while inserted
Durable alloy construction
Ideal for address plates, bathroom fixtures, electrical panels, lighting fixtures and ornamental fixtures
46 lbs., weight capacity
Return Policy
California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Questions & Answers

Q:Will these work for hanging a low weight item on a 1/4" thick hardieplank ceiling?

by|Jan 14, 2022

2 Answers

Answer This Question

A: Thanks for your question No the Cobra TripleGrip cannot be use for a ceilling application. Thanks

by|Jan 15, 2022

A: They should, provided it is low weight...I've used them on ceilings.

by|Nov 5, 2022

Q:These say they can be used on all types of walls. Does that include plaster walls?

by|Dec 4, 2021

1 Answer

Answer This Question

A: If it an old Plaster, you should use an other type of anchor. Also It’s important to consider the weight you will put on this anchors. Plaster It’s always a challenging material.

by|Jun 11, 2022

1 found this answer helpful

Q:Do these work in solid brick where there is no space behind, like there is with 1/2" drywall? I a...

by|May 22, 2021

2 Answers

Answer This Question

A: Hello Ed, thank you for reaching to us with your question. The Triple Grip is working with solid brick and each anchor will support 100 pounds, so if you put 2 it will be up to 200 pounds. The drill bit included is a 5/16'' and fit with #10 anchor. If you consult our Web Site you will find the Spec Sheet. www.cobraanchors.com. BEST REGARDS

by|May 25, 2021

A: that style will not work on solid brick, there are other inserts that will .

by|Aug 25, 2021

1 found this answer helpful

Q:what type anchor/screw do i need for grab bar installation in 12" bathroom tile

by|Oct 11, 2020

2 Answers

Answer This Question

A: First, try to insure that you find the wall studs to directly screw into with #10 x 1 1/2 inch screws. Failing finding wall studs, I have used either the Hillman 3/16 inch "DuoPower" wall anchor or the 1/4 inch "FlipToggle". Insure also that you drill through to grab the substrate backer. You will have to use a hammer drill and a quality masonry bit to drill through the tile surface.

by|Jun 11, 2022

1 found this answer helpful

A: Hello Nana, Thank you for reaching out to us. The answer given to you is the right one. If you decided to use a Triple Grip, a #12 will be even better. Thank you

by|Oct 13, 2020

Customer Reviews

4.3 out of 5

(254)

4.3
out of 254 reviews
63%recommend this product

162

Filter by:

Showing 1-10 of 254 reviews

Jul 1, 2020

Best product to attach anything to sheetrock

Verified Purchase

Recommended

May 14, 2020

Awesome product.. all you need in one container

Verified Purchase

Recommended

Nov 12, 2019

It's an Excellent Product...I will use it for all kinds of Walls, Recomend.

Verified Purchase

Recommended

Jul 26, 2018

Don't waste your time or money.

I used the drill bit that came in the package but these things pulled out of the wall while I was trying to install the shelves I bought them for. The mechanism does not engage and they just spin in the hole while you are trying to screw in the screws.

5 found this review helpful

Oct 15, 2016

Poorly made product

I've had this case for several years and would always use them to anchor pictures or anything I needed to I've also started to notice that after a little while they don't stay anchored so I began to investigate why. After researching the design, it seems as if the body of the anchor is supposed to slide towards the top as you screw in the screw. The problem with these is that the part that is supposed to slide is connected at the base of the channel in with which its supposed to slide into. The only way to break it free is to cut it with a sharp blade. After that it seems to work as intended. These are more than likely just poured into a plastic mold and the idea was for the plastic to break at the channel and slide in accordingly. Unfortunately that plastic is too think to break smoothly and you are left with the anchor spinning in the wall or just not holding as well as it should be. I have since gone back to the store to get different anchors that actually work and don't have such a complicated design. This should be a simple procedure but they have over thought the simplicity of an anchor and therefore have created a terrible product.

11 found this review helpful

Jan 26, 2023

Verified Purchase

Jan 1, 2023

Home Depot raised the price on these $3.25 since April...

Home Depot raised the price on these $3.25 since April '22. Stop robbing from your customers Home Depot!!

Verified Purchase

Dec 28, 2022

There ok. I have 5 of the twenty I...

There ok. I have 5 of the twenty I used bend and not go completely into the drilled tile hole. Once they bend they’re useless.

Verified Purchase

Dec 15, 2022

Verified Purchase

Nov 24, 2022

They are strong and much easier to use than metal...

They are strong and much easier to use than metal fasteners. I'm glad I bought the set with the appropriated drill bit..

Verified Purchase

Frequently Bought Together

Best Seller

Price:

$1593

This item: #10 x 1-1/2 in. Anchors with Screws (70-Pack)

$15.93

E-Z Ancor Twist-N-Lock 75 lbs. Drywall Anchors (50-Pack)

$15.80

Milwaukee 5/16 in. x 6 in. 2-Cutter SDS-PLUS Carbide Drill Bit

$8.37

Compare Similar Hollow Wall Anchors

		current product		Top Rated
Brand	E-Z Ancor	Triple Grip	Triple Grip	Triple Grip
Name	Twist-N-Lock 50 lbs. Drywall Anchors (50-Pack)	#10 x 1-1/2 in. Anchors with Screws (70-Pack)	#8 x 1-1/4 in. and #10 x 1-1/2 in. Anchors with Screws (57-Pack)	Multi-Purpose Anchor Kit with Screws (-50 Pack)
Price	$1347 /box	$1593	$1627	$1747
Ratings	(1203)	(254)	(240)	(254)
Anchor Diameter (in.)	#6	5/16"	5/16"	1/4"
Weight Capacity (lb.)	50 lb	46	35 lb	29 lb
Fastening Base Material	Drywall	Drywall,Plaster,Wood	Drywall,Plaster,Wood	Drywall,Plaster,Wood
Fastener Type	Self Drilling Anchors	Ribbed Anchor	Plug Anchors	Plug Anchors
Fastener/Connector Material	Nylon	Nylon	Nylon	Alloy
Interior/Exterior	Interior	Exterior,Interior	Exterior,Interior	Exterior,Interior
Package Quantity	50	70	57	50
Features	Self Drilling	No Additional Features	No Additional Features	No Additional Features
	View Product	View Product	View Product	View Product

Explore More on homedepot.com

See All Servies

Internet #202527087

Model #172K

Store SKU #382225