Delivering to

My Account
Lists

Welcome Back!

Sign in

Register

Sign Out

Cart 0 items
All Departments
Home
Lumber & Composites
Boards, Planks & Panels
Appearance Boards & Planks
Softwood Boards
Common Boards

Internet #300678580

Model #276584

1 in. x 8 in. x 6 ft. Eased Edge Pine Shiplap Board (6-Pack)

Shop the Collection
(45)Questions & Answers (39)
  • Actual Dimensions: .625 in x 7.125 in x 6 ft
  • Use for interior and exterior applications
  • Board can be left unfinished or primed and painted or stained
  • See More Details

Product Overview

White barnwood shiplap used as an accent wall for the bath room

  

Personalize Your Shiplap Appearance Boards

Shiplap and tongue and groove boards lets you create unique spaces like one-of-a-kind accent walls, focal points, and craft projects.

Unfinished barnwood shiplap used as the ceiling of an outdoor patio in california

  

Two Shiplap Sides to Choose From

Shiplap and tongue and groove boards contain small, tight knots and have been precisely profiled to give the boards a smooth surface on one side and a rough, sawn surface on the other.

Image of 3 unfinished shiplap boards

  

Shiplap and Tongue and Groove Board Sizes

Available in 1x6 and 1x8 boards.

White shiplap board used as an accent wall in the outside patio area of the backyard

  

Proper Shiplap and Tongue and Groove Care

When used in outdoor applications a wood protector sealant or top coat is required.

White shiplap board used as an accent wall in a living room

  

Shiplap and Tongue and Groove Installation Tips and Tricks

Due to the natural characteristics of wood, some cupping and warp may occur prior to installation.

White shiplap board used as an accent wall in a bedroom

  

Shiplap Installation Tips and Tricks

Install horizontal or vertical. Full-length furring strips are required for vertical applications.

Swatch image of a unfinished shiplap board


Unfinished Eased Edge Shiplap Boards

Swatch image of a unfinished primed shiplap board


Primed Gray Eased Edge Shiplap Boards

Swatch image of a unfinished primed shiplap board


Unfinished Square Edge Shiplap Boards

Swatch image of a unfinished shiplap board foucus on the sqaure edge


White Washed Square Edge Shiplap Boards

Swatch image of a unfinished tongue and groove shiplap board


Unfinished Tongue and Groove Boards

Swatch image of a unfinished primed tongue and groove shiplap board


Primed Gray Tongue and Groove Boards

UFP-Edge eased edge shiplap siding is made from the highest grade lumber and has minimal natural blemishes for an impeccable appearance. Each board is precisely profiled and is ready to be stained or primed for a custom coat of paint. By combining a quality cut of lumber and acrylic primer to all sides, this shiplap boards siding kit is ready to install for long-term performance. When used for exterior applications, wood protector sealant is required.
  • Ideal to create barn wood accent walls and other do-it-yourself projects
  • Small, tight knots highlight natural wood characteristics
  • Kiln dried to minimize warp and shrinkage
  • Easy to cut and install in horizontal and vertical applications
  • Exterior applications require an exterior wood protector sealant
  • 6-boards per pack
  • 3.31 sq. ft. per board/19.86 sq. ft. per 6-pack
  • Actual product size: 5/8 in. x 7-1/8 in. x 6 ft.
  • Boards may shrink and cup slightly after acclimating
  • Exposed board face measures 6-5/8 in. wide
  • Gives your space the perfect shiplap look
  • Square footage based off exposed board face width
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Internet #300678580

Model #276584

  • 1 in. x 8 in. x 4 ft. Eased Edge Pine Shiplap Board (6-Pack)

    UFP-Edge1 in. x 8 in. x 4 ft. Eased Edge Pine Shiplap Board (6-Pack)

    (45)
    $4523
    /package
  • M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer (Tool-Only)

    MilwaukeeM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer (Tool-Only)

    (672)
    $27900
  • 1 in. x 6 in. x 6 ft. Square Edge Pine Shiplap Board (6-Pack)

    UFP-Edge1 in. x 6 in. x 6 ft. Square Edge Pine Shiplap Board (6-Pack)

    (81)
    $5997
    /package
  • M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Dual Bevel Sliding Compound Miter Saw (Tool-Only)

    MilwaukeeM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Dual Bevel Sliding Compound Miter Saw (Tool-Only)

    (268)
    $44900
  • 25 ft. PowerLock Tape Measure

    Stanley25 ft. PowerLock Tape Measure

    (2251)
    $1197
  • 1 in. x 8 in. x 6 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    UFP-Edge1 in. x 8 in. x 6 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    (34)
    $7276
    /package
  • 1 in. x 6 in. x 8 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    UFP-Edge1 in. x 6 in. x 8 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    (34)
    $7056
    /package
  • M12 FUEL 12-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit w/ 2 Batteries and Bag (2-Tool)

    MilwaukeeM12 FUEL 12-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit w/ 2 Batteries and Bag (2-Tool)

    (2253)
    $22900
  • 1 in. x 6 in. x 4 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    UFP-Edge1 in. x 6 in. x 4 ft. Unfinished Pine Tongue and Groove Shiplap Siding Board (6-Pack)

    (34)
    $3035
    /package
  • M18 18-Volt Lithium-Ion Cordless 5 in. Random Orbit Sander (Tool-Only)

    MilwaukeeM18 18-Volt Lithium-Ion Cordless 5 in. Random Orbit Sander (Tool-Only)

    (631)
    $9900

    • Specifications

    Dimensions

    Actual Product Length (ft.)
    6
    Actual Product Thickness (in.)
    .625
    Actual Product Width (in.)
    7.125
    Coverage Area (sq. ft.)
    3.5625
    Nominal Product Length (ft.)
    6
    Nominal Product Thickness (in.)
    1
    Nominal Product Width (in.)
    8

    Details

    Board Joint Type
    Shiplap
    Fastener recommendation
    Nails
    Features
    Paintable,Stainable
    Finish Type
    Unfinished
    Lumber Grade
    Premium
    Material
    Wood
    Moisture content
    KDAT
    Number Of Boards Per Pack
    6
    Returnable
    180-Day
    Texture
    Smooth

    Warranty / Certifications

    Manufacturer Warranty
    N/A

    Questions & Answers

    39Questions18Answers

    What is the cost of this product per LF?

    Asked by MP September 20, 2020
    2
    Answers

    per a linear foot ? well 6 foot x a 6 pack is 36 linear feet, then you just to need to know the cost with tax at your local store and divide.

    What size nails would best be used for an interior install?

    Asked by Bryan31030 July 25, 2020
    1
    Answer

    2 inch floor nails.

    I’m in need of just a few more boards to finish our project and it’s now discontinued. Could a representative contact me

    Asked by NOertel July 19, 2020
    1
    Answer

    This product is out of stock, if you need it asap, then you need to google it to find where it might be available.

    My wall is 18ft by 8 Ft so if I got 1in x6 in x 8 ft how much would I need.

    Asked by Zine June 26, 2020
    1
    Answer

    18 x 8 = 144 sq ft 3.25 sq. ft. per board/19.52 sq. ft. per 6-pack 144/ 19.52 = 7.37 so you need just over 7 [ 6 packs ] 2 extra boards to be exact. so 7 packs and 2 loose boards.

    Can these be used as a horizontal fence?

    Asked by Steve April 20, 2020
    2
    Answers

    No,

    Have 128 square feet to cover how many packs

    Asked by Joan March 3, 2020
    2
    Answers

    Each 6-pack of shiplap covers about 26.5 square feet. You will need about five, 6-packs to complete your project.

    looks like an interesting product, but I need longer boards. I usually work with 16' so there ar...

    Asked by djmcnich December 10, 2018
    2
    Answers

    Like most all wood products this product varys by location, so you need to contact your local home depots pros desk to find out if what they sell of this product can be ordered in that size.

    Is the front surface textured like the square edge shiplap?

    Asked by ibowlngolf December 2, 2018
    2
    Answers

    For the most part it’s smooth. Does have some texture on some boards

    I’m planning on using this on my ceiling and was told I need about 550 sq feet. So how many pacs would I need

    Asked by Barb October 21, 2018
    3
    Answers

    Please contact your local PRO associate to discuss your materials list.

    Can you install this over a textured ceiling?

    Asked by Bradyhouseowner May 27, 2018
    2
    Answers

    Yes, as it needs to be nailed into place.

    1 in. x 8 in. x 6 ft. Eased Edge Pine Shiplap Board (6-Pack) - page 2

    Customer Reviews

    • 4
      out of 45 reviews
    • 68% recommend this product
    5star-icon25
    4star-icon10
    3star-icon1
    2star-icon2
    1star-icon7
    Filter by:
    Showing 1-10 of 45 reviews
    Jun 22, 2020
    Not 8”
    I bought this 6 pack thinking it would be the perfect size for what I needed. Got it in and the boards are only 7”. So now I need one more board and I’m not sure how to order just one.
    by PC
    Response from UFPI RepresentativeJun 25, 2020
    We’re sorry to hear your expectations were not met. A representative will be in contact with you via email to discuss your issue. Thank you.
    Jun 11, 2020
    Shiplap Review
    Really good product and very good price. I've used it many times in my homes. It's easy to install and very easy to use.
    by logancm2428
    Feb 4, 2020
    Looks great up on the wall. Easy install
    Looks great up on the wall. Easy install
    by Alexander
    Jan 28, 2020
    They were just what we were looking for. Some had some broken edges and were warped but nothing c...
    They were just what we were looking for. Some had some broken edges and were warped but nothing crazy.
    by Alexander
    Sep 18, 2018
    Used the Shiplap boards for one of my rooms in the basement. Love the look just need to seal the...
    Used the Shiplap boards for one of my rooms in the basement. Love the look just need to seal the wood now. Great homework room. My Son loves it.
    by
    Jan 27, 2018
    Ordered these eased edge shiplap boards to finish the ceiling in a new room we built in our basem...
    Ordered these eased edge shiplap boards to finish the ceiling in a new room we built in our basement. Boards arrived via UPS and were well packaged. We let them sit in the packages for several weeks in the basement to acclimate. They probably didn’t need to sit that long, but we weren’t ready. The boards were nailed directly to the ceiling joists. A pattern was worked out to evenly stagger the joints, and minimize waste. There were some boards slightly cupped, and a minor split, but there were no ‘unusable’ boards. All in all, this ceiling project went very well, and we are pleased with the results. This room was just the beginning of a total basement remodeling job, so we’ll be ordering many more boxes. The photos below show the boards as installed, before any finish applied. We still haven’t decided what finish, but it will be a combo stain/sealer. My advise is to take your time, follow nailing instructions, measure twice, cut square, and figure out a pattern that staggers the joints and minimizes waste.
    by DaveB
    4 people found this helpful
    Apr 24, 2017
    Ordered 20 "Packs" - Was surprised to see they came in boxes and not just bundled with tie wire, ...
    Ordered 20 "Packs" - Was surprised to see they came in boxes and not just bundled with tie wire, all seem to uniform in size, kiln dried like it says. Textured side seems a little "Fuzzy", lots of scraggly pieces hanging off it. Some pieces to seem to have hairline cracks down their length, some knots bigger and deeper than others, but not bad in the slightest. Only thing that got me, was because I'm waiting for windows to arrive, I decided to pull these out and pre-primer them as they are going on the exterior of a house. As the primer dried the pieces did seem to warp, shouldn't bee problem though once I nail it in
    by ChristopherSunSmasher
    5 people found this helpful
    Mar 15, 2017
    This product is tongue and groove and it was easy to work with! I am not the most handy and even ...
    This product is tongue and groove and it was easy to work with! I am not the most handy and even I could successfully put this in my hallway! The hubby was VERY impressed sense he is a carpenter and picky with woodwork! With that being said I think just about anyone could work with this product and make it look nice! We stained ours with Minwax wood stain color: "Jacobean" also sold at Home Depot.
    by LinnieLU234
    13 people found this helpful
    Dec 5, 2020
    It was exactly what we were looking for....
    It was exactly what we were looking for.
    by MrGee
    Aug 15, 2020
    For my exterior project (wrapping a weathered landscape box made...
    For my exterior project (wrapping a weathered landscape box made w 4x4s), the product was good enough. Half the planks had significant bows to work around and chinks caused by knots.
    by Lights
    Showing 1-10 of 45 reviews

    Related Searches

    magnifying glass

    shiplap boards

    magnifying glass

    shiplap boards 6ft

    magnifying glass

    pine shiplap

    magnifying glass

    beadboard ceiling