2200 sq. ft. Golden Eagle Pellet Stove with Igniter

I have had this stove since Jan 2012 - 2 full years now. The stove construction and hopper size is good. The heat output is good. It is solid built. It is good that it hold 3 bags of pellets. The design of this stove does have issues - in how the burn pot is held in the unit. I can run the stove on 2 or 3 for only short periods of time. I have learned to limit the air leaks around the burn pot to get better performance. Also, I did get the burn pot kit gasket from US Stove and installed it - this helps some. I empty the burn pot out twice a day - once in the morning and once again before going to bed. I can run the stove at 2 now overnight, but modifications were required. I have had to reduce air flow from the air wash on the glass window - about 75% reduction. I have also replaced the the holding clamps for the ash drawer with bolts and wing nuts, to get tighter seal. Its very important the no air gets sucked in around the draw or around the access door. I have added gasket to both. There are upsides. Parts are easy to find and order online. Many of the parts are common to other US stoves. I also have outside air plumbed to the unit and my total exhaust length is only about 7 ft, including T-clean out and one elbow out the house. Also, I purchased the stove on sale for $900. I have not had issues with US Stove customer service - then sent out the fix kit for free including pdf documentation on how to install yourself - it was easy. But, the kit did not completely fix the issue. Btw, some others have complained about cleaning the burn pot out - it should be noted that you need to clean the burn pot daily or at a very min every other day to remove klinkers - this is normal. The stove does not have an agitator for the pot. Unfortunately, even with my fixes, I have to clean it out 2 times a day. I'm getting a 2nd stove for house in order to get completely off oil soon. I will be reading the other reviews for other stove to see if there is a better performing stove - and at the same price point.

I ordered this online as an alternative source of heat and was very sceptical. The stove's performance was better than anticipated. Once the stove was installed (by a different company) (you will have to get the vent piping, not included with the stove) it provided the space it was purchased for with an ample amount of heat with some to spare. I purchased this stove as an alternative heating source for a large barn I was looking for a hopper size that would not need to be tended to as often.

We bought this stove two years ago have had problems with it ever since I had to call the company and get a new auger because the auger broke twice. Also, we’ve been putting new pins in because they keep breaking and every day we have to change the pin, not good quality at all, do not recommend for anyone to buy. This product should be taken off the shelf more work than it is helpful. I called the company to complain about it. They were not interested in anything we had to say.

Poorly built. Would not run. Support staff awful. Returned it.

Hooked it up turned it on and nothing happened had to call service and screw around take back panel off which includes taking pipe all back off upper limit switch was tripped from factory got it going but that was a pain

Not the best stove, i have a hard time with it jamming up pellets even after trying all differnt types. Had the stove for over 2 yeas now. If i lower feed it really does not heat my house

Had the stove 2 months. working well. need to clean pot everyday. uses about 40 lbs a day on lowest setting. on the highest setting that works without overflowing the pot it uses almost 80 lbs a day. kept our old farm house at 70 deg when it was -18 out. cant complain.

Several issues with it turning it self off, as well as the auger jamming. The stove is not user friendly for an older person.

This product is poorly built. The auger would not turn to feed the pellets to the burner. The company (US STOVE) wanted me to pay for a technician to come out and diagnose and repair the problem. I only had the unit 7 days so I took it back to Home Depot. You would think the company would pay for the technician since it was still under warranty.