A moisture and mold resistant panel for wall and ceiling applications.
The industry's only ultralightweight panels with moisture and mold resistance.
Superior score and snap for a cleaner edge and faster installation.
USG Sheetrock Brand panels are specially formulated to ensure easy scoring, clean snapping and enhanced strength from core to face.
Measure and mark panel cuts with measuring tape or T-square.
Use utility knife to score through paper face and lightly into core. Grasp board and snap away from you.
Cut back paper to separate. Sand or rasp to smooth cut edge. Keep edge as square as possible.
The Sheetrock Brand sets the industry standard for the highest-quality and best-performing walls and ceilings.
USG manufactures gypsum boards in 17 locations across the U.S. using a highly automated process.
Classified as a Class A Interior Finish Material per Section 803.1 of the International Building Code (IBC).
Panels meet or exceed ASTM C1396 specifications when tested per ASTM D3273.
Meets ASTM C1396 for 1/2 in. water resistant and 1/2 in. exterior gypsum soffit boards.
Achieved GREENGUARD Gold Certification and qualifies as a low VOC emitting material (meets CA 01350).
A: This price is per sheet. I just bought some.
A: I certainly wouldn't, it wouldn't stand up to the motion. Plus it'd add a lot of weight. Use paneling instead.
A: Thank you for your inquiry. Sheetrock Mold Tough Ultralight panels are intended for: -Commercial or residential applications where 1/2 in. (12.7 mm) panels with moisture and mold resistance are desired • New or repair and remodel construction • Non-fire-rated wood- or steel-framed wall and ceiling applications • Interior tile substrate in dry locations or areas with limited water exposure • Protected exterior soffit and ceiling applications Hope this helps.
A: Given the weight I would consider a thinner wall board or paneling.
A: Moez, thank you for considering the USG Sheetrock Brand 1/2 in. x 4 ft. x 8 ft. UltraLight Mold Tough Drywall for your project. This board is intended for interior walls, ceilings, and exterior protected soffits. It is not approved for vertical exterior applications. The following USG products are approved for use on walls in flood zones: Sheetrock® Brand Glass-Mat Panels Mold Tough® Durock™ Brand Glass-Mat Tile Backerboard Securock® Brand Glass-Mat Sheathing Durock® Brand Cement Board with EdgeGuard™
A: Thank you for your inquiry. USG Sheetrock Brand 1/2 in. x 4 ft. x 8 ft. UltraLight Mold Tough Drywall is an ultralightweight 1/2 in. panel with moisture and mold resistance for wall and ceiling applications. Please check with your local code official for information on their requirements for restaurants.
|Brand||USG Sheetrock Brand||USG Sheetrock Brand||USG Sheetrock Brand|
|Name||1/2 in. x 4 ft. x 9 ft. UltraLight Drywall||1/2 in. x 4 ft. x 8 ft. UltraLight Mold Tough Drywall||5/8 in. x 4 ft. x 12 ft. EcoSmart Firecode X Drywall|
Buy 34 or more $13.08
Buy 34 or more $17.83
Buy 26 or more $17.24
|Drywall Product Thickness (in.)||1/2 in.||1/2 in.||5/8 in.|
|Width (ft) x Length (ft)||4x9||4x8||4x12|
|Drywall Features||Sag Resistant||Moisture Resistant, Mold Resistant||Environmentally Sustainable, Fire Resistant, Sag Resistant|
|View Product||View Product||View Product|