|Container Size||1 Gallon||Coverage Area (sq. ft.)||200 sq ft|
|Aerosol / NonAerosol||Non-Aerosol||Application||Wall & Ceiling Spray Texture|
|Base Material||Latex||Coating Product Category||Paint|
|Dry to Touch (min.)||2 min||Interior/Exterior||Interior|
|Kit||Individual||Number per Package||1|
|Paint Type||Interior Paint||Paint/Stain Clean Up||Soap & Water|
|Paint/Stain Features||No additional features||Sheen||Flat/Matte|
|Surface Material Use||Ceiling, Drywall||Transparency||Solid|
A: Alvin, The USG Sheetrock Brand TexoLite Wall and Ceiling Sanded Paste Stipple White Texture Paint is an interior product, we would not recommend this be used outside.
A: JamesMichael Thank you for your inquiry. Application of a prime coat is necessary to equalize surface porosity. After prepared surfaces have thoroughly dried, apply a prime coat of SHEETROCK® First Coat flat latex paint or a good quality interior latex flat wall paint with high solids content. Prime coat should be applied undiluted and allowed to dry before decorating.
A: You Should prime your drywall before using this product
A: Mimi If it is just a spot, the article below may be useful.. If it is the whole furniture then a paint stripper may be needed. https://www.washingtonpost.com/lifestyle/home/how-to-remove-stray-paint-stains-from-wood/2014/03/11/1f352d98-a0ab-11e3-a050-dc3322a94fa7_story.html
A: A Marine and a sailor are at a public restroom. The Marine goes to leave without washing up. The sailor says, 'In the Navy they teach us to wash our hands.' The Marine turns to him and says 'in the Marines they teach us not to pee on our hands'. Point being - the answer is prevention.
A: Bryan You can use either a 3/8” or ½”nap roller depending on the texture you want. Hope this helps