#1 Home Improvement Retailer

Internet #

304751761

Model #

21-700518

Store SKU #

1003142059

Store SO SKU #

1003068750

1/2 in. x 18 in. Black Steel Schedule 40 Cut Pipe

Includes 1.5 ft. ($8.41 /ft.)
$12.61
  • For use with Natural Gas and Liquid Propane applications
  • Features a protective black coating that prevents oxidation
  • Threaded ends have plastic caps to prevent damages in transport
  • View More Details
Store
0 in stock
caret

Product Details

VPC cut pipe is the way to go when selecting gas pipe for your residence. Our durable, schedule 40 black steel is hydrostatically tested and available in sizes to fit residential and light commercial gas and air applications. With durable color-coded plastic end caps that help ensure the pipe ends remain undamaged in transport.
  • Rated at maximum 214 psi at 400°F
  • Made to ASTM A53 specifications
  • Not for use with potable drinking water
  • Steel construction
  • Color coded plastic end caps
  • Pipe size is for I.D. of pipe
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

1Questions
caret
Q:can this pipe be buried?
by|Jul 17, 2018
3 Answers
Answer This Question

A:  You can bury it, but it has very little corrosion protection. You may want to take a look at galvanized pipe. It has zinc plating on it to resist corrosion when buried in the ground.

by|Jul 18, 2018

    A:  I guess but the coating is borderline. I would probably eventually rust. I think it would also depend on code in your area

    by|Oct 17, 2019

    A:  Yes, this pipe can be buried, subject local building code requirements.

    by|Jul 17, 2018
      Showing 1-1 of 1
      caret

      Customer Reviews

      4.5 out of 5
      (124)
      • 4.5
        out of 124 reviews
      • 92%recommend this product
      Filter by:
      Showing 1-10 of 124 reviews
      As I have done in the past I am using this steel cut pipe for a different purpose than it was int...
      As I have done in the past I am using this steel cut pipe for a different purpose than it was intended. I have a bench top drill press that I built a table for. Anyone else whose done this will tell you that the up/down crank has to be extended. This pipe was perfect for it. The ID was just a bit larger than the hub it needed to fit. After cutting the pipe to size I drilled a hole use a tap and a hex bolt to attach. For the handle end I mounted flange and made a simple round wood piece to attach it to. The pic I've included shows it with the table removed so you can see how I used it. It is strong, sturdy and works great.
      by
      Response from VPC, Home-Flex ExpertJul 20, 2020
      Thanks for the information and the picture, InBoerne! ValenciaPipe
      • DIY
      • Verified Purchase
      • Recommended
      Worked as expected
      Worked as expected
      by
      • Verified Purchase
      • Recommended
      I was actually building a handle rail fir my father who is a Disabled Veteran and has trouble get...
      I was actually building a handle rail fir my father who is a Disabled Veteran and has trouble getting up after several strokes. It works well.
      by
      • Verified Purchase
      • Recommended
      1 found this review helpful
      This was purchased for the purpose of using it and two end caps for the handle on an end vise. Wo...
      This was purchased for the purpose of using it and two end caps for the handle on an end vise. Works great'
      by
      • DIY
      • Verified Purchase
      • Recommended
      3 found this review helpful
      Well, this pipe has been a great item for us. No gas connected with it here. We used it as a supp...
      Well, this pipe has been a great item for us. No gas connected with it here. We used it as a support for the display of a feather flag for our business. It's a lot better than any other way of rigging it. We simply weld a threaded connector normally used to connect two pipes together to the hitch of our vehicle and screw the pipe into it and insert our flag onto the pipe.
      by
      • DIY
      • Verified Purchase
      • Recommended
      Be careful to check threaded ends when buying this and similar pipe sections. Even though ends a...
      Be careful to check threaded ends when buying this and similar pipe sections. Even though ends are protected I have had a few pieces with defectively cut threads. These pieces leaked badly even though sealed carefully with gas rated tape and torqued very tight. Other individual pieces from various manufacturers, installed the same way, did not leak Quality control is not up to a good standard. The value of wasted time is higher than the price of the product.
      by
      Response from VPC, Home-Flex ExpertOct 14, 2019
      Sorry for the trouble that you are reporting ksg. Can you tell us in which store you bought this pipe, so we can look into this? Can you give us a call? (661) 257-3923 I am here from 8-5 Los Angeles Time M-F. Ask for Jon. ValenciaPipe
        Black iron pipe for project.
        Basic black pipe did the job. Only problem is I only needed the less expensive galvanized, but was out of stock at the store I visited, so paid $5 more to just get the job done.
        by
        • Verified Purchase
        It does what a pipe is supposed to do. It's...
        It does what a pipe is supposed to do. It's for natural and liquid gas.
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        Showing 1-10 of 124 reviews

        Frequently Bought Together

        Top Rated
        ++
        Price:
        $1261

        Compare Similar Black Pipe

        current product
        Top Rated1/2 in. x 18 in. Black Steel Schedule 40 Cut Pipe
        1/2 in. x 30 in. Black Steel Pipe1/2 in. Black Steel Pipe 1.2 ft. H Paper Towel Holder Kit3/4 in. x 2.5 ft. Black Steel Schedule 40 Cut Pipe
        BrandVPCThe Plumber's ChoicePIPE DECORSTZ
        Name1/2 in. x 18 in. Black Steel Schedule 40 Cut Pipe1/2 in. x 30 in. Black Steel Pipe1/2 in. Black Steel Pipe 1.2 ft. H Paper Towel Holder Kit3/4 in. x 2.5 ft. Black Steel Schedule 40 Cut Pipe
        Price
        $1261
        $1364
        /piece
        $1699
        $1896
        Ratings
        (123)
        (5)
        (0)
        (16)
        Nominal Inside Pipe Diameter (In.)1/2"1/2"1/2"3/4"
        Product Length (ft.)1.52.5 ft1.19 ft2.5 ft
        ConnectivityThreadedThreadedThreadedThreaded
        Pack Size1111
        THD SO SKU1003068750
        View ProductView ProductView ProductView Product