1 qt. Clear Semi-Gloss Water-Based Interior Polyurethane

We used this as a finish coat for painting our half bath floor tiles. A top coat wasn’t suggested to us, but once we finished painting, it was obvious we needed it. A quick google search suggested a water based polyurethane top coat. This was perfect. It was pretty easy to use. I would suggest however, if you need to “touch up” a spot, that you just do an entire extra layer. We have one square of tile w an extra coat and you can see it from certain light angles It dried quickly, it’s holding up great and it’s really what we needed to complete the project . It feels sturdy, like it will last a long time. The Matte is perfect

Used for dining room table. Tried spray oil based first which was bad; sputtered a lot. Sanded off worst of sputter blobs and then used this water based stain with a brush. It was easy to apply & dried fast. Put on about 7 coats; have been using the table w/ no apparent scratches or wear so far. Some coats I didn't apply uniformly and you could see different sheens, but was easily fixed by just applying another coat. So really you only need to get the last coat right.

Excellent, smooth finish. Always dependable.

I tried out the Clear Semi-Gloss Water-Based Interior Polyurethane, and it's pretty awesome. This stuff gives a nice glossy finish to my wood projects without the hassle of oil-based products. It's water-based, so clean-up is a breeze, and it dries super fast too. The only downside is that it can be a bit thin, so you might need to apply a few coats for a really smooth finish. For the convenience and quick drying time, I'm willing to overlook that. It's a solid choice for my interior woodwork.

So far it looks okay. Waiting to see how well it holds up. However, i needed more 1 gal product and no stores carry it and it will take a week to get it. That's just not acceptable.

refinished countertops with granite-look contact paper. Used water-based gloss polyurethane to seal the seams, for added durability/protection and the keep glossy look of the contact paper. I also coated peel-and-stivk PVC tile used as kitchen backsplash. Again to seal the seams, for added protection and to extend durability. The backsplash tile was slightly textured, which minimized the gloss, which was good. I usually also add a coat to spray-painted wallplates to help the spray-paint last.

Applies easily and dries smoothly with multiple coats and light sanding between. Looks AMAZING!

Worked perfectly. Sanded, cleaned, 1st coat, lightly sanded, cleaned, 2nd coat, lightly sanded, cleaned, final coat, light polish. Beautiful on the red oak library ladder!

Excellent poly. Dries super fast and looks awesome. Use this on most of my “indoor” projects!

I needed to refinish a dining room table and a butcher block countertop with a resilient finish, protective wood from scratches and hot items. I did a lot of research and decided not to pay attention to negative reviews because it sounded like the problems came from user error. This product is perfect. It is easy to apply with a high-quality, synthetic, bristle brush, it dries very fast. The finish strong and smooth and beautiful. Just remember to stir frequently when applying.