36 in. White Rail Gate Kit

Just installed Weatherable fencing on my porch decided to add a gate had some fencing left seen this and decided to try weatherable top bracket are slightly bigger than their rails but it turned out pretty nice

This gate kit was simple to install and works like a charm. I actually made my gate 6 foot long so i added a wheel to the non-hinged side and it works super. Im using the Veranda rails for my whole porch and they are easy to install and look great. There is only one thing i dislike about the veranda rails and that is the bottom rail is quite flimsy. While it looks great and it holds up well as long as there is not stress on it, some children have a tendency to put their feet on it to boost themselves a little higher and you can really see the flex in it when that happens. The picture obviously does not show my completed porch but it does give you a view of what the gate looks like after i installed it.

Project; Replacing old wood deck & railings with TREX composite planks and Veranda Traditional Railings. Gate is very nice looking and fairly easy to assemble and install. Two Problems arose. #1. I planned to install it at the end of a rail run at the corner and adjacent to a side railing that was at a right (90 degree) angle. I wanted the gate to swing open towards that side railing, but since I used the iron post kits there was no way to install the spring hinges correctly since the side railing brackets were already attached to the post where the gate hinges would attach. I couldn't move the spring hinges ( lower for top and higher for bottom) because the iron post's composite inserts only run about 8 inches deep, so the hinge screws would only be set into the thin 1/8 inch PVC post sleeve. Instead I had to install the gate to open into the deck area- a bit awkward but tolerable.. #2. Even then, the black steel latch bar was so long that it hit the last baluster preventing the gate from closing all the way. I was lucky to have a spare chrome latch set that was shorter and use that.

Fairly easy assembly. Looks great to match another rail manufacturer. There is a photo on the package with numbers that tell what additional items are required for the gate kit. Pretty easy to assume by the size of the package that rails and spindles aren't in there!

Rating provided by a verified purchaser

Only thing wrong is the screw heads strip out. Otherwise great at working to keep the dogs in .

They were well made my only complaint was the cross braces , the screws holding them together cheapens the look .

Since they don’t give u any horizontal parts, it was a lot of money for just the two vertical 2x4”x3’ pieces and the hardware. I just think you can look into just selling some standard plastic parts like ur 4”x4” column covers, and sell some popular sizes like a 1.5”x3.5” piece to go over a 2x4 and a 1.5x1.5 so that we can make our own projects just like u have solid plastic lumber. Seems like I have to buy a kit to get these type pieces or a fence section. Thanks T.M.

The veranda 36 inch gates are perfect, the only problem was the directions. They should tell you to come up from the bottom of the side supports a half inch on all installations and they say use the 2 inch screws from the rail kit ( they are 2/12 inches), had to buy shorter screws. 4 stars

Excellent gate, easy to assemble, not crazy about the latch, but it is functional