K Series 72 in. x 84 in. Aged Barrel DIY Finished Knotty Pine Wood Double Sliding Barn Door with Hardware Kit

Like other reviews mention directions are terrible and install took 4 hours. So many left over washers and screws. I also had to install a backboard because the studs didn’t line up. If you are not handy or patient I wouldn’t recommend. It’s tedious but overall I’m very pleased.

Easy to put together, would have been nice if all holes were pre-drilled. Measure twice hang once.

These are great doors. They look high end without spending thousands of dollars. Boards are 5/8” so not nearly as thick as a slab door, but to partition off a room like we did, highly recommend. As far as directions go, really not bad. The boards are tongue and groove, so just orient the boards one direction, click, lock, go to next one. The hardest part for me was hand screwing the screws into the wood. I forgot my drill at our cabin. Use a elec drill to insert screws. If u pick these up at Home Depot, the boxes are 7 feet long and weigh appx 50lbs eac-there are 2. See pics I took of door and boxes for ref. If I have a SUV with food down seats or a p/u like we have, you’ll b fine. If U have a little car or Sedan, have them shipped 4free to ur doorstep. These doors are on sale for $646. It’s a great price, but they are not $3000 doors like in a multi million dollar mountain home, just carry the look. All in all I’d highly recommend these doors. I put mine together pretty fast, b/c I read reviews of warped boards. My set was perfect, if any boards are warped, you can either get new ones or use a clamp to hold boards while u screw them together. This is a great price for a nice product. Be sure to grab a set of handles as they do not come with set. Set does come with all nec hardware. I really hope this review helps u out. I love this set, and would buy it again.

Purchased the 84" doors for 5' x 7' opening. Easy to install instructions but would add the following tips. See https://fulldadmode.com/how-to-install-double-barn-doors/ for full guide on how to install. Tips: 1. Watch out for beveled edges. Keep all “like” sides of wood together (bevel + bevel, non-bevel + non-bevel). 2. Use a backer board if wall studs do not align to track holes. 3. Adjust stopper placement to desired door opening width. 4. Get large handles. Buy door handles as they are not included. 5. Drill pilot holes for door hangers slightly larger than needed so you can adjust doors to be plum when shut.

Overall the quality is fine. The directions are horrific. I think someone wanted to punish us with the directions. A 4 page handout on how to perform brain surgery would have provided more explanation. I have a lot of left over washers etc that I don't know what to do with. But they hung fine and look good overall.

It took me a while, but it got done..

This was nowhere near the color that it indicated and shows in the picture. It was also extremely hard to put together. On a positive note, when we did get it put together, it was very pretty.

I didn’t get screws to put my door together- so how do i make my door

Easy to assemble and it looks great