|Pegboard Hole Diameter||0.25 in||Product Depth (in.)||9 in|
|Product Height (in.)||32 in||Product Width (in.)||96 in|
|Color Family||Blue||Color/Finish||Blue Pegboard with White Accessories|
|Included||Accessories, Bins, Hardware, Hook(s), Installation Kit, Mounting Hardware, Pegboard, Screws, Shelves, Support Brackets||Material||Metal|
|Number of Pegboards Included||6||Package Quantity||1|
|Pegboard Accessory Type||Organizers||Returnable||90-Day|
|Manufacturer Warranty||Limited Lifetime Warranty. Includes Manufacturer Defects. Excludes Normal Wear and Tear. Accessorial O-Rings are excluded from Limited Lifetime Warranty.|
A: Hello and thank you for your inquiry. We actually do not advertise load ratings because too much depends on the quality of installation, how weight is distributed both on the panels and on the hooks and shelves, as well as the age and quality of the substrate the panels are installed in to. Due to all of the variables involved in any given installation, we have found it potentially misleading to suggest proper “load ratings” that are generally formulated in laboratories under ideal conditions, specifications, and protocols that do not accurately reflect the actual real world applications that these products are used in. That all being said, if you are installing into traditional drywall and using the included drywall anchors, our “recommendation” would be no more than 100 LBS per panel (200 LBS per panel into studs or similar), no more than 10-20 LBS per shelf assembly, no more than 10-15 LBS per hook that engages in 2 slots, and no more than 5-10 LBS per hook that engages in a single slot. All recommendations assume properly installed panels, weight relatively evenly distributed across the panel face, as well as weight situated at the base of each hook or shelf as opposed to the tip. Hope this helps!
A: Thanks for the question! Yes, you would simply need to adjust the stabilizing tabs that are on the hooks with a pair of pliers. If you bend them back slightly toward the panel to 'grip' the pegboard better, they will keep the hooks much more secure. They are made with some tolerance to accommodate all of our coating finish thicknesses so they can take some one time adjusting to get them dialed in just right.
A: Separate squares
A: Thanks for the question! Yes, the 32in x 96in is made up of (6) 32in Tall x 16in Wide panels that can be used side-by-side or in separate locations all together, they are independent of one another.
A: It;s seperate pieces I believe it's 6 pieces for peg board
A: There are 6 (16x32 inch) panels. They are easy to install on walls with 16 inch on center studs. I installed mine nearly 3 yrs ago and have been very please with this system. I did buy additional hooks.
A: Yes ,these are separate sheets that could be split up.
A: No problem, great product and enjoy