|Actual Product Length (ft.)||3 ft||Actual Product Thickness (in.)||1.5 in|
|Actual Product Width (in.)||1.5 in||Coverage Area (sq. ft.)||0.39 sq ft|
|Nominal Product Length (ft.)||3 ft||Nominal Product Thickness (in.)||2|
|Nominal Product Width (in.)||2 in|
|Appearance Board Type||Hardwood Boards||Board Joint Type||Square Edge|
|Fastener recommendation||Adhesive;Nails||Features||Paintable, Stainable|
|Finish Type||Unfinished||Lumber Grade||S4S|
|Material||Poplar||Moisture content||Kiln Dried|
|Number Of Boards Per Pack||9||Returnable||90-Day|
|Manufacturer Warranty||Manufacturing Defects Only|
A: Measurements are dimensional -- 1-1/2 x 1-1/2 square. There is a common misconception when looking for lumber products regarding sizing. Most of the time if buying from a home center, their materials are referred to in their original NOMINAL size; which is the lumber's rough cut size. If you were to buy from a lumber yard, where the material is still partially rough cut, then the measurements would be shown as 2 x 2 square. It could also be referred to as eight-quarter (8/4) square. If ever in doubt, take a tape measure with you when you shop.
A: This measures 2" x 2" x 3'.
A: Yes, nicely bundled.
A: Yes, you get 9 3ft pieces.
A: 2 in. x 2 in. x 4 ft. Square Poplar Hobby Boards should be available through your local Home Depot store.
A: Dimensional lumber is sized based on raw tree cuts which is then trimmed down cutting off the waste and the industry standards then allows the 2 X 2 wood to be sold in actual dimensions of 1.5 X 1.5 inches (after potential waste is removed). The term S4S means smooth 4 sides meaning there are no live edges and does imply length.
A: Hi Norma, for this 2 in. x 2 in. x 3 ft. Square Hobby Board Kiln Dried S4S Poplar Board (9-Piece), if ordered on Homedepot.com, will be purchased and shipped as it appears on Homedepot.com. We are not able to make changes to the product. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Nominal Product Length (ft.)
Board Joint Type
Coverage Area (sq. ft.)
0.39 sq ft
1.5 sq ft
2 sq ft
40 sq ft