Internet #202088082

Model #155399

Store SKU #155399

1 in. x 6 in. x 12 ft. Pressure-Treated Board

  • Pressure treated lumber for long lasting performance
  • Treated for protection against fungal decay, rot and termites
  • Perfect for decks, docks, ramps and lumber-exposed projects
  • See More Details

Product Overview

Pressure treated deck at sunset to show stairs and an outdoor living space.


Add Value To Your Property

Studies show that adding a deck is one of the best ways you can increase your home's value.

Pressure treated deck overlooking a lake complete with pressure treated steps and Deckorail components


Building Code Approved

Pressure-treated decking is building code approved for use in decking in above-ground or ground contact applications.

Close up of the deck boards showing how to properly clean your deck


Extend The Life Of Your Deck

Your maintenance efforts will give you a pressure-treated project that looks bright and fresh for years to come!

A sunny day of a man using a powerwasher to clean his deck boards


Preventative Maintenance Plan

1. Depending on the location of your outdoor project with regard to direct sun exposure, foliage coverage, etc., it may be sufficient to clean/brighten and recoat every two years. 2. If you decide to wait two or more years to perform your next cleaning/brightening, you may want to use a power washer. Be sure that the cleaner/brightener you use contains a mildewcide.

Close up of the a generic paint can on deck boards


Choosing The Right Stain Or Paint

When determining the right stain and paint for your deck, consider what color will best enhance the wood's finish.

A close up of water beaded up on a deck board


Paint or Stain Tips

If you desire to paint or stain the treated wood project, it is important that the wood be dry enough to accept a coating. The best way to determine if the wood is sufficiently dry to paint or stain is to sprinkle droplets of water onto the wood. If the water droplets are absorbed, the wood is ready to be painted or stained. If the water droplets bead on the surface of the wood, it is too wet. You should wait a few days before attempting to paint and stain the wood.

Close up of a non color additive pressure treated deck board


No Color Additive

Weathershield Pressure-Treated Lumber

Close up of a cedar-tone pressure treated deck board


Cedar-Tone

Weathershield Pressure-Treated Cedar Tone Lumber

Close up of a redwood-tone pressure treated deck board


Redwood-Tone

Weathershield Pressure-Treated Redwood Tone Lumber

Close up of a pressure-treated post with Deckorail solar and ball top post caps


Post Caps

Post caps add the finishing touch to your deck, porch, or fence project. What's more, they protect your post from nature's elements.

Close up of a pressure-treated double v and square edge posts


Deck Posts

Deck posts add a classic, decorative charm to your outdoor living space all while adding support to your deck, fence or porch.

Close up of a pressure-treated B2E baluster and square edge spindle


Balusters & Spindles

Treated balusters are used not only for safety and strength, but they also aid in creating a custom look to your railing project.

Every piece meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, landscaping, and other outdoorTreated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.
  • Pressure treated for long life
  • Effective against termites, rot and fungal decay
  • Limited lifetime warranty
  • Can be painted or stained
  • WeatherShield includes water repellant in the treatment process
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Find everything you need to complete your decking project here
  • Note: Product may vary by store.



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Actual Product Length (ft.)
12
Actual Product Thickness (in.)
1
Actual Product Width (in.)
6.0
Approximate Weight (lb)
21
Nominal Product Length (ft.)
12
Nominal Product Length (in.)
12
Nominal Product Thickness (in.)
1
Nominal Product Width (in.)
6
Nominal Width
6 in

Details

Chemical retention (lb./cu. ft. )
0.0
Contact Type Allowed
Above Ground
Features
Paintable,Pressure Treated,Stainable
Lumber Grade
Pressure Treated;Stainable;Paintable
Pressure treatment chemical
MCA - Micronized Copper Azole
Total Linear Feet Covered
12

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

8Questions16Answers

What kind of wood is this? Why not say that in the description?

Asked by Ladtad June 25, 2018
1
Answer

This board is made out of Brazilwood (Caesalpinia echinata).

Hoe much $$$$ per board?

Asked by Don November 15, 2017
1
Answer

This listing is per board.

Can 5/4 by 6 treated lumber be screwed over a pre-existing 2x6 deck boards

Asked by Mitchell April 30, 2017
1
Answer

This depends on span ratings, weight increases, and design values. Contact an engineer, architect and/or your local building code official to determine if this will work.

Can this wood be used for raised beds?

Asked by Terry March 26, 2016
2
Answers

nothing edible like vegetables, but for lush perennials, sunflowers and caladiums, cascading over sides...this wood lasts forever.

When can I paint this board? Paint type?

Asked by BCB March 11, 2016
1
Answer

If you desire to paint pressure-treated wood with an oil based paint, make sure the wood is dry before application. Pour some water over the surface. If it beads, wait until the board dries; if it is quickly absorbed into the wood, it's ready to be painted.

can I stain weathershield boards

Asked by PaBo October 11, 2015
3
Answers

The description of the product says you can stain it. Right there, in the actual text.

Is it feasable to use this item as a deck board (floor of deck)???

Asked by tec718 April 4, 2015
4
Answers

no, sturdy as can be but not enough to walk on even if hanger beams/rack underneath are placed closer than 16" standard code, one foot is not enough. must use 2 bys.

Is the 1 IN. X 6 IN. X 12 FT. PRESSURE-TREATED BOARD exactly that size?

Asked by Jason January 24, 2015
3
Answers

3/4 x 5 1/2 x 12' 1/2" (mill allows for one cut or a blades width on each end to smooth off).

Customer Reviews

  • 4.3
    out of 19 reviews
  • 100% recommend this product
5star-icon13
4star-icon2
3star-icon1
2star-icon2
1star-icon1
Filter by:
Showing 1-10 of 19 reviews
Looks great on my wood deck
I have a 12 X 10 wood deck that had some warped wood boards that needed replacing. I bought two of these at The Home Depot and they worked great!
by SouthFloridaDIY
3 people found this helpful
Imperfection...
Imperfection
by Sal
The boards were warped so I had to cut them...
The boards were warped so I had to cut them to get a straight edge.
by Mark
we got rid of it because every time we put...
we got rid of it because every time we put a screw init, it split/cracked.
by HomeDepotCustomer
Good...
Good
by HomeDepotCustomer
The boards were great! I used them as posts for my porch. I took my time and cut them. They look...
The boards were great! I used them as posts for my porch. I took my time and cut them. They look beautiful. Exactly as I expected.
by Griffin72
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
High quality, the fence project turned out well. Was able...
High quality, the fence project turned out well. Was able to choose the best boards with very little sorting.
by HomeFixer
Showing 1-10 of 19 reviews