#1 Home Improvement Retailer

Internet # 202204728

Model # 4396037RP

0-18 in. Dryer Periscope with 2 Clamps

$3359
Apply Now
Pay $8.59 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Provides a tight 2-1/2 in. clearance
  • Beveled ends to prevent interference with floors and side walls
  • Includes 2 clamps
  • View More Details
caret

Product Details

0 - 18 in. metal vent periscope for tight 2-1/2 in. clearance. One male Snap-Lock fitting and one extra-long draw-band collar. Excess length can be trimmed to fit. Includes 2 clamps.
caret

Specifications

caret

Questions & Answers

44Questions
caret
Q:Will it work with GE
by|Oct 14, 2022
1 Answer
Answer This Question

A:  Hi, Clera. We are not able to speak on the requirements of another brands requirements for installation. We recommend reaching out to GE to verify if this will work.

by|Oct 14, 2022
    caret
    Q:Can this be used outside the house or must be inside?
    by|Jul 31, 2022
    0 Answer
    Answer This Question
    caret
    Q:Does the vent adapter fit all models of dryers, not just Whirlpool?
    by|May 29, 2021
    2 Answers
    Answer This Question

    A:  As far as I know, the vent will fit all dryers with same diameter vents. Wirks best when dryer is in close proximity to the wall and outbound vent access.

    by|May 10, 2023

    A:  Yes. The connecting pipes from the dryer and to the vent tube should be industry standard on all brands.

    by|May 30, 2021
    caret
    Q:Is one side female and the other male so a flexible foil dryer vent can be connected from it to m...
    by|Feb 10, 2021
    2 Answers
    Answer This Question

    A:  Yes, one side is male and the other side is female. A few slits will need to be added to the male port to help collapse it so the flexible Vent hose can connect. Tin snips or even strong scissors is all that is needed to cut the slits in the thin aluminum port. The instructions explain it well that come with the vent.

    by|Feb 11, 2021

    A:  Hi Chartchecker, Yes this model has both a male and female end for proper connection. We hope this helps.

    by|Mar 10, 2021
      Showing 1-4 of 44
      caret

      Customer Reviews

      4.2 out of 5
      (142)
      • 4.2
        out of 142 reviews
      • 86% recommend this product
      Filter by:
      Showing 1-10 of 142 reviews
      Damaged
      Bought Dec.5 and arrived on time,bad thing was, it was crushed! Had to straighten and use as is because I needed to do laundry. Maytag should have better packaging for what you’re charging!
      by
      Response from Consumer CareDec 14, 2022
      Thank you for bringing this to our attention; we regret you are having these concerns with your Vent, Knoway. We value all of our customers and we would like the opportunity to look into this further for you. Please reach out to us directly via Facebook http://spr.ly/64263GirA or Twitter @MaytagCare. Let’s see what we can do for you! Michael D
        Our dryer was on its last legs when we bought our & it wasn’t very big. When we bought a new big...
        Our dryer was on its last legs when we bought our & it wasn’t very big. When we bought a new bigger dryer, of course I didn’t think of the connection to the dryer vent. I already hooked up the washer & the location of the dryer is tight (see the picture). It was also a tight squeeze for the vent even for a flexible vent hose. My frustration level was beyond max since the flexible hose kept coming undone since there is no room to spare. This is where the Whirlpool Periscope comes in to save the day. I was able to trim it down to be able to fit it in the tight space (I was rushing and could have done more trimming as you can see in the picture). This made the dryer vent connection complete in minutes compared to the couple hours I spent trying to make the flexible one work. Definitely will recommend this product to others that have to work in tight spots for setting up dryers. It has been roughly a year now with no issues to report.
        by
          • Recommended
          3 found this review helpful
          Great Product!
          This product allowed us to get the back of the dryer as close as 3 inches from the wall. It was easy to install and only took about 30 minutes to install it. This made it possible for us to have the front load dryer in the space provided in our laundry room and gave enough clearance for the laundry room door to close.
          by
            • Recommended
            11 found this review helpful
            Worked out perfectly
            I bought this because I made a built in pedastil for my washer and dryer. They were raised 20" and closer to the wall so the conventional corrugated tube wouldn't work this was adjustable to the height and ANGLE I needed, I couLdnt have made the project work without it. Plan ahead!!
            by
            • DIY
            • Verified Purchase
            • Recommended
            4 found this review helpful
            The unit was a breeze to install.
            The unit was easy to fit and install. Due to its design, it saved on space.
            by
            • DIY
            • Verified Purchase
            • Recommended
            4 found this review helpful
            Works Well
            The installation wasn't too easy, because you need to push the dryer into place and connect one end at the same time. That is not a fault of the product, but just know that going in. Also, if your exhaust vent to the outside if very close to the corner of a wall, the corner of the vent will hit the wall when you use the vent at an angle. Make sure to use the crimp side for the connection to the outside vent, and the smooth side for the exhaust vent from the dryer. It will not work otherwise, and will leak exhaust. It saved me a bunch of space, a traditional aluminum flex tube was around 6.5" and this was about 4.5". I needed the vent to be under 5.5", so I was very pleased with how the installation ended up. A tin snip is required to trim the vent to size.
            by
            • DIY
            • Verified Purchase
            • Recommended
            81 found this review helpful
            good product, very versatile and easy to install
            by
              Worked well for 10" c/l to c/l vents. Measured, trimmed and aluminum taped seams.
              by
                Adjustable dryer vent.
                Easy to adjust, but had to buy some tin snips to cut off excess metal, which left sharp edges. It solved my problem of lining up my dryer to the dryer vent, which was not simple. It did the job...
                by
                • Verified Purchase
                by
                • Verified Purchase
                Showing 1-10 of 142 reviews