Model # 6008532

Internet #202905731

Store SO SKU #860980

Williams 60,000 BTU/Hr Forsaire Counterflow Top-Vent Wall Furnace Natural Gas

Discontinued Williams

60,000 BTU/Hr Forsaire Counterflow Top-Vent Wall Furnace Natural Gas

  • 60,000 BTU natural gas furnace with a standing pilot igntion
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • 60,000 BTU natural gas furnace with a standing pilot igntion
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional
The Williams Forsaire 60,000 BTU Natural Gas Top-Vent Furnace features a counter-flow blower system that warms the air at both the ceiling level and floor level to provide equalized temperature regulation throughout your room. This natural gas furnace heats up to 1,400 sq. ft. areas and comes with a handy 4 ft. 115-Volt service cord. rated for elevations 0 - 2,000 ft.
  • Produces up to 60,000 BTUs/Hr
  • Standing pilot ignition
  • 24-Volt wall-mounted thermostat helps control and maintain a desired temperature
  • Counter-flow blower system warms air at ceiling and floor levels for equalized temperature regulation
  • Includes a 4 ft. 115-Volt service cord
  • Meets CSA and ANSI safety requirements
  • May be converted to propane with the purchase of gas conversion kit number 7724
  • Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
  • Recommended for professional purchase only
  • Click here for more information

Product Overview

  • 60,000 BTU natural gas furnace with a standing pilot igntion
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional
Model #: 6008532
Internet #: 202905731

The Williams Forsaire 60,000 BTU Natural Gas Top-Vent Furnace features a counter-flow blower system that warms the air at both the ceiling level and floor level to provide equalized temperature regulation throughout your room. This natural gas furnace heats up to 1,400 sq. ft. areas and comes with a handy 4 ft. 115-Volt service cord. rated for elevations 0 - 2,000 ft.

  • Produces up to 60,000 BTUs/Hr
  • Standing pilot ignition
  • 24-Volt wall-mounted thermostat helps control and maintain a desired temperature
  • Counter-flow blower system warms air at ceiling and floor levels for equalized temperature regulation
  • Includes a 4 ft. 115-Volt service cord
  • Meets CSA and ANSI safety requirements
  • May be converted to propane with the purchase of gas conversion kit number 7724
  • Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
  • Recommended for professional purchase only
  • Click here for more information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
10.25
Product Height (in.)
80.25
Product Width (in.)
14.125

Details

Accessories Included
No
Automatic shutoff
Yes
Color
White
Color Family
Whites
Fuel Gauge
No
Fuel Type
Gas
Heat rating (BTU/hour)
60000
Heater Controls
Thermostat
Heater Type
Other
Heating Product Type
Gas Wall Heater
Heating Technology Type
Convection
Ignition Type
Pilot
Indoor/Outdoor
Indoor
Installation
Recessed/Surface Mounted
Number of Heat Settings
Variable
Power/Fuel Type
Natural Gas
Product Weight (lb.)
121lb
Remote Control
No
Returnable
90-Day
Room Size (sq. ft.)
Greater than 900
Thermostat
Yes
Timer Included
No
Vented
Yes

Warranty / Certifications

Certifications and Listings
ANSI Certified,CSA Listed
Manufacturer Warranty
Refer to Williams' Limited Warranty for warranty information

Specifications

Dimensions

Product Depth (in.)
10.25
Product Height (in.)
80.25
Product Width (in.)
14.125

Details

Accessories Included
No
Automatic shutoff
Yes
Color
White
Color Family
Whites
Fuel Gauge
No
Fuel Type
Gas
Heat rating (BTU/hour)
60000
Heater Controls
Thermostat
Heater Type
Other
Heating Product Type
Gas Wall Heater
Heating Technology Type
Convection
Ignition Type
Pilot
Indoor/Outdoor
Indoor
Installation
Recessed/Surface Mounted
Number of Heat Settings
Variable
Power/Fuel Type
Natural Gas
Product Weight (lb.)
121lb
Remote Control
No
Returnable
90-Day
Room Size (sq. ft.)
Greater than 900
Thermostat
Yes
Timer Included
No
Vented
Yes

Warranty / Certifications

Certifications and Listings
ANSI Certified,CSA Listed
Manufacturer Warranty
Refer to Williams' Limited Warranty for warranty information

Questions & Answers

Vent

Does this unit come with the vent kit?
Asked by: Liz
Yes, the vent unit does come with the vent kit.
Answered by: CommunityAnswer
Date published: 2016-06-23

How do you install this vent into the wall?

Asked by: Suru
In one regard this question is difficult to answer. If you own a single story home you cannot install the vent through the wall. You need a minimum of 4 feet clearance above the furnace. It could be wall vented if there is sufficient attic space above the room your planning to put this in. But in almost every case it MUST be vented through the roof. If through wall is your only option you need to shop for a model that is rated for "Direct Vent.
Answered by: Jerry
Date published: 2015-11-09

Where does one go to get it installed

I'd like to purchase this heating unit but I'm having difficulty locating someone to install it. Does HD have recomended installers
Asked by: beannie
I believe HD can refer installers for you. Depending on if you only replacing a wall unit or this is a completely new install. you may need a few different professionals. If this is a new install you'll need a gas certified installer to run the gas pipe to it. Also a roofer to install the vent stack. Both are aside from the actual installer of the furnace itself. I did almost the entire installation myself, except the roof stack and only because at my age, have developed a sort of vertigo and cannot do steep roofs, (mine is very steep). Luckily my son in law is a roofer by trade and was able to complete that portion. Another consideration is the electrical. The unit comes with a regular plug in cord that exits the lowest part of the unit. But an option is what's known as HARDWIRE. I opted to hardwire mine, which simply means it's connected directly to the breaker panel. I didn't want the cord laying on the floor. But if you opt to hard wire, might need an electrician. Hopefully all this doesn't scare you from this unit, works very well and is far more efficient than my previous unit. The furnace is not difficult to place in the room you want it for but is a bit heavy. Once placed against the wall it only need a couple brackets to secure it. Also it is not shipped with the exhaust venting required to exhaust through the roof. I ordered the vent kit on-line from a company called ZORO for just over $50.00. The kit gets you about 4 1/2 ft above the furnace. If it needs to go higher (through an attic) you may need additional pieces to complete the vent install. All other parts are available at HD. The furnace requires 6 inch oval double wall vent kit and must be at least 4 ft high. Above 4 ft converts to double wall 4 inch round. There is no way to tell you how high the round needs to go because the roof pitch and height determines how tall the exhaust stack must be. The instruction pack that comes with the furnace explains all the material and requirements for this. Again this all sounds much worse than it really is. Just be aware that additional costs of installation could probably run between $300 and $500. If you need a gas line installed, most any plumber (gas certified) can do this. If you want electrical hard wire (instead of using the plug) pretty much any electrician can do this fairly cheap. Probably the most difficult is a roofer for installing the stack. You want a good well experienced roofer to assure you don't wind up with any leaks. I hope this helps. I find this furnace to be of VERY high quality and highly recommend it. I'm quite pleased with mine.
Answered by: Jerry
Date published: 2016-06-19

one sided heat or two, fan? vetrans discount/

does it heat from one side or two? does it have a fan accessory? can I use vetrans discount to purchase? does it require kit for high elevation?
Asked by: tntmac
I can't answer as to high elevation. I know there is a model rated specifically for high elevation but I don't know what the difference is. This unit has a fan and blows from the lower front. But it is built so it can also vent from a side or rear. The side vent option gives more heating area. The rear vent is intended to be used in the event you want to install the unit within a wall and thus can blow heat into the room behind as well. You will need to order the vent kit if you want to use it that way. The side venting requires no special material except for the grill needs to be ordered separately. Also there is a booster blower unit available and is helpful for the rear venting option but not necessary. In all situations you cannot block the front vent. To determine which unit is specified for high altitude I would recommend you log on to the Williams web site (as I did before I purchased). Once there you can find the appropriate model number for high altitude use. I recall while on the web site there were several models that specified high altitude. You don't mention if you require a unit for natural gas or propane but the web site will also help you make that selection. Be sure to read them carefully to ensure to order the proper gas supply accommodations for your area. I hope this has been helpful. Also, I cannot answer as to the veterans discount. You need to check that with your local store. I have heard the Home Depot had discontinued the V.D. but that most stores are still honoring it.
Answered by: Jerry
Date published: 2016-01-19
  • y_2017, m_11, d_22, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_202905731, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • QUESTIONS, PRODUCT

Customer Reviews

60,000 BTU/Hr Forsaire Counterflow Top-Vent Wall Furnace Natural Gas is rated 3.7 out of 5 by 3.
Rated 5 out of 5 by from Perfect for old school spaceheater replacement We replaced a space heater which stood out into the room with this one. Professional installation/permits are required where we are, and he was able to attach it to a chimney liner per our local code. This heater really puts out, and is more efficient than a gravity space heater. The greatest benefit was the extra room it offered in the small apartment. The only negative is the packaging. Although the cardboard SHOULD be enough to handle shipment the first one I ordered came damaged from rough handling. Other reviews indicate the same issue, so CHECK IT BEFORE YOU LEAVE THE STORE!
Date published: 2016-03-29
Rated 5 out of 5 by from Simplicity in ordering On line order was simple and shipping (to store) was much quicker than anticipated. There was some minor damage to some components. I'm not sure if this occurred due to rough handling or if the manufacturers packing failed. I didn't mention it because the parts were easily adjusted and will not depreciate the appearance or functionality. Time was also a factor in not bringing this up as it required installation and re-scheduling associates was not a viable option.
Date published: 2015-09-08
Rated 1 out of 5 by from Do not recommend Item was shipped later than what I was first told. The shipping date kept changing. UPS delivered the item three days after it arrived at their facility in my town. They forgot to take it out for delivery right away. When the item arrived, parts were not assembled correctly, fan was bent, and lots of lose screws. I didnt return the item because I needed it for the arrival of our new baby. I installed the furnace and it would make really loud noises where the fan is at. I thought the loud noises would go away. I tried fixing it but now the heater/furnace won't turn on. If item is going to be shipped incorrectly assembled, it might as well just be shipped in pieces.
Date published: 2015-12-22
  • y_2017, m_11, d_22, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_202905731, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms
  • REVIEWS, PRODUCT