The WA600 contact adhesive has a coverage of 111 ft/2 bonded. This means you have to have coverage on your substrate as well as the back of the sheet of laminate. So if you have a 4' x 8' sheet that is 32 sq. ft. and the substrate is 32 sq. ft. for a total of 64 sq. ft. bonded. Thank you for your inquiry, Wilsonart Engineered Surfaces Customer Service
It should work fine glue both and let dry to the touch before you put them together
We do offer a a spray adhesive that is available at the home center. It is the Wilsonart 700A. It is available in a 14.2 can. This is a contact adhesive like the 600 brush/roll. Thank you for your inquiry, Wilsonart Engineered Surfaces Customer Service
The coverage of the WA600 is 111 ft2/gal bonded. This means that you would have the adhesive on the back of the laminate as well as the substrate you are bonding to. Thank you for your inquiry, Wilsonart Engineered Surfaces cUSTOMER sERVICE
Yes i believe so . you would have to be very careful as its a little messy you also need yo buy the special roller pad cause the solvents in the clue will attack the roller and the fuzz on the roller will come off alot and cause problems. Also if you have never done this before it needs to be put on perfect and rolled with a laminate roller. There are no second chances with this stuff when both glued surfaces touch there is no going back or repositioning the panel. Good luck
Yes you can. That is what we used it for.
WA600 would not be recommended for bonding in this application. Please call the Wilsonart Hotline at 1-800-433-3222 and one of our Customer Service Representatives will be happy to assist you. Thank you for your inquiry, Customer Service Wilsonart Engineered Surfaces
Yes. just follow instructions.
I would recommend calling the Wilsonart Hotline at 1-800-433-3222 for more information on approved applications. Thank you for your inquiry, Customer Service Wilsonart Engineered Surfaces
No, this product is only for indoor use.