Internet #202727991

Model #RC-MAW35-6

World's Strongest Fastener Standard (6-Anchors)

  • Great for fastening railings, shelving, cabinets and more
  • Easy to use for secure and tight hold
  • Stainless steel screw offers durable support
  • See More Details
$1010

Frequently Bought Together

+
+
Price:
$1010

Product Overview

WingIts - World's Strongest Fastener - WingIts are rated up to 300 lbs. (depending on application) and will never Loosen. Millions of installations and No Issues. WingIts utilizes a #8 stainless steel screw, which is ideal for installing Bath Accessories, Window Dressings and Shelving. Typical installations include Bath Accessories, Window Dressings, Mail Boxes, Hose Reels, Heavy Drapery Rods, Shelving, Cabinets, Pedestal Sinks, Dispensers, Coat Hooks, Railings and for most Wall Mount Accessories with a base over 1 inch. Made in USA.
  • World's strongest fastener for hollow walls
  • WingIts never loosen - handles forces in all directions
  • Installs in minutes - lasts a lifetime
  • Objects can be easily removed and replaced
  • Even works in the holes created by other fasteners failure

Compare Similar Hollow & Drywall Anchors

1/4 in. Drywall Anchor with Phillips Head Screw (8-Pack)
current product
World's Strongest Fastener Standard (6-Anchors)
100 lbs. Philips Pan Head Heavy-Duty Toggle LockSelf Drilling Drywall Anchors with Screws (10-Pack)Twist-N-Lock 75 lbs. Medium Duty Drywall Anchors (50-Pack)
BrandHiltiWingItsE-Z AncorE-Z Ancor
Name1/4 in. Drywall Anchor with Phillips Head Screw (8-Pack)World's Strongest Fastener Standard (6-Anchors)100 lbs. Philips Pan Head Heavy-Duty Toggle LockSelf Drilling Drywall Anchors with Screws (10-Pack)Twist-N-Lock 75 lbs. Medium Duty Drywall Anchors (50-Pack)
Price
$930
$1010
$1152
$1220
Ratings
(41)
(64)
(161)
(435)
Maximum Weight Capacity (lb.)030010075
Anchor Length (in.)2.542.51.625
Fastener/Connector MaterialSteelPlasticAlloyNylon
Fastener Head StyleFlatPanFlatFlat
Package Quantity861050
Anchor Diameter (in.)1/4"1"#8#8
Weight Capacity (lb.)0 lb30010075
Fastener TypeMolly/Toggle BoltMolly/Toggle BoltMolly/Toggle BoltMolly/Toggle Bolt
Finish Family ZincZinc
View ProductView ProductView ProductView Product

Specifications

Dimensions

Anchor Diameter (in.)
1"
Anchor Length (in.)
4
Required Drill Hole Size (in.)
.75

Details

Color Family
Black
Drive Style
Phillips
Fastener Callout Size
#8 - 32 x 3.5"
Fastener Head Style
Pan
Fastener Plating
Other
Fastener Type
Molly/Toggle Bolt
Fastener/Connector Material
Plastic
Features
No Additional Features
Finish
unfinished
Included
Screw
Interior/Exterior
Interior
Maximum Weight Capacity (lb.)
300
Package Quantity
6
Product Weight (lb.)
0.45
Returnable
180-Day
Weight Capacity (lb.)
300

Warranty / Certifications

Manufacturer Warranty
10 Years from Date of Installation

Questions & Answers

35Questions7Answers

Can these be used in a ceiling?

Asked by Sherman October 21, 2020
2
Answers

I would not use it on the ceiling except for something lightweight, like a picture / frame with no glass. The drywall give the support on the wall and you would lose most of that in a ceiling application.

Will these hold a LED TV to a drywall? Tv weighs 200 pounds

Asked by John567 October 10, 2020
0
Answers

How much weight can this support? I want to mount a grab bar into drywall, next to my garage entry door.

Asked by August 22, 2020
1
Answer

Use 3 Zip-Toggle Togglers instead. Easier, Cheaper. Faster.

How well will these do on wood paneling?

Asked by Jaci August 22, 2020
0
Answers

how big is the hole

Asked by sheridan August 12, 2020
1
Answer

Look on the box or on line for the specifications as they may change. It is a bigger hole than most other methods of attachment. To be frank, there are better methods of attachment that use a smaller hole and achieve higher load strengths. Look at the snap toggle for one good example. Plus, they are MUCH cheaper. You just need to be careful starting the bolt so as not to cross thread it.

What is the drill bit diameter recommended for this anchor? I need an anchor that can fit in a sl...

Asked by SJ July 28, 2020
1
Answer

3/4 "

If there is no stud can you stil hang a shelf that will hold something heavy.

Asked by Judi July 23, 2020
0
Answers

will these work for a tv mount into drywall

Asked by wen June 29, 2020
1
Answer

Use snap toggle ZIP ITS. Cheaper and quicker

will it work in the shower

Asked by barbra June 24, 2020
0
Answers

Once you secure the anchor, into what do you screw? There seems to be no plate with screw mounts.

Asked by Bruce June 4, 2020
1
Answer

You drill the hole, slip the wingit into the hole nd the "legs" pop out. Then you use the screw in the center to attach whatever you are attempting to attach and draw the screw up tight. The wings expand and spread out the weight. The system works, but they are expensive. Use a ziptoggler instead. They are cheaper, faster and hold as well or better. Not plastic either.

World's Strongest Fastener Standard (6-Anchors) - page 2

Customer Reviews

  • 64 Customer Reviews
  • 4.2 out of 5 stars overall
88% of customers recommended.
Overall Ratings
5star-icon(42)
4star-icon(9)
3star-icon(1)
2star-icon(2)
1star-icon(10)
Sort By:
A great fastener and more reasonably priced when bought in lots of 100. There IS a learning curve...
A great fastener and more reasonably priced when bought in lots of 100. There IS a learning curve but works well once you get the hang of it. Accessories recommended: Stud finder or pilot drill to make sure there is a cavity behind where you are locating the anchor; 3/4" drill appropriate to the material you are drilling into; long handle bent needle-nose pliers; #8 flat washer for each anchor; strong fingers. Please note: the anchors advertise a load capacity in a 360-degree arc, all the way around. BUT NOT AWAY FROM THE SURFACE. Whether that is on a wall or ceiling, there is no way for the manufacturer to know how strongly attached whatever you are putting the anchor into is attached itself, or how thick it is. 1/8th inch thick paneling will not hold what ¾” sheetrock will, and on a ceiling that is very little. Same on a wall, but now the load is probably at an angle, and who does the trigonometry to figure out the effective load component? Only architects and engineers. A picture hook load is almost totally straight down. A shelf load is both down and outward, especially when a kid or unsteady adult hangs on the front of the shelf. Anything in the ceiling is almost all straight down, trying to pull through the surface. DON’T use any fastener not embedded into a piece of framing timber or steel to hold a straight drop load! In a wall, the anchor is primarily trying to support a vertical load by shearing its’ way down through the face of the wall. That will hold a lot. My experience: Stud finders usually indicate a wider area than the actual stud, which is good because the Wingit will be almost 2” across when tightened against the wall. If they bump up against the edge of a stud, the legs may not lay flat against the wall and the anchor is more likely to fail. I have used about 30 so far. They come un-assembled and snapping the leg assembly into the neck can be hard – be sure to tap or push on straight: I let one bend sideways and the neck tore, making the anchor useless even before it got near a wall. I used my own ¾” drill to go through 5/8” sheetrock and started to push in the anchor assembly – I tried doing this with just the plastic parts once since the thing had been so hard to assemble, and somehow the assembly fell apart inside the wall. Bad idea. I found it quite hard to squeeze the three legs down tight enough to get them through the ¾” hole so I used my bent-nose, needle-nose pliers to squeeze the legs down enough to fit into the hole without hurting my tender pinkies. Doing a few is not a problem, but tough on the hands after a few dozen. The pliers were also great to go the final distance to get the legs flush with the wall – put the nose of the pliers against two legs and the handle against the wall, then thump the middle of the pliers gently a few times and Voila – legs flush with the surface! I then used the same pliers to gently push the legs of the anchor into the wall a bit more to minimize the chance of breaking away sheetrock as they pushed through. If you are mounting on tile, that obviously will not be a problem, but any damage to the surrounding sheetrock will reduce the load capacity of the anchor, so being careful is worth the effort. I also learned another thing – make sure the part that sits on the surface of the wall has not snuck up toward the base of the 3 legs, because it will prevent the legs from closing down tight enough to go through the ¾” hole. I overlooked this once, got frustrated when the darn thing would not seat, tapped the big flat surface a bit too hard and the entire thing went through a now larger hole in the wall. OOPS. I was actually able to salvage this hole location because when I put in the next anchor, the legs were spread out wide enough to hold, but although the head would fall through, I put some cardboard under it to hold it temporarily so I could then remove the screw and reinsert it after going through one of the 4’ vertical shelf support tracks I was using. The screw is not likely to pull through that steel and the track hid the cardboard. One last point - If you buy a smaller pack of Wingits with the wall hook attachment, you will not have one of the problems I had – a submarining screw head. The wall hook plate provides something hard to tighten the screw down onto. Since my first project was to hang shelving, I had to install the Wingit anchors, tighten the anchor down securely, and then remove the screws (Yes, the assembly will stay in place with the screw removed) so I could later attach the shelf track with several anchors. This all works fine until you lose concentration and overtighten the screw a bit, without anything under the head. It can easily bore down into the anchor where it will stay. Unless you have a screw-removing bit handy, that anchor is done, and no easy way to use it to hang something. I solved this by putting a #8 flat washer (#10 if using the extra heavy duty Wingit anchors) under the head of the screw while tightening it down. Take it off or use it during final assembly. Overall, a valuable addition to my list of products used to make my world kid and klutz-proof.
Was this helpful?
29
0
I didn't realise that the wingnuts required a hole in...
I didn't realise that the wingnuts required a hole in the wall that is nearly an inch in diameter. That maybe alright in plasterboard but mine was in tiles. I used rawlbolts instead.
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Was this helpful?
0
0
Garbage Do not work like described...
Garbage Do not work like described
Was this helpful?
0
0
Very easy to install when you follow all directions. This...
Very easy to install when you follow all directions. This is a great item if installing an handrail onto a drywall only.
Was this helpful?
0
0
Although these anchors may be the strongest, they are tough...
Although these anchors may be the strongest, they are tough to put into the wall and if you are not careful, the anchor (on the inside of the wall) will come off. Also, one more very important feature is that the screw heads on the WingIts are WAY too small for the grab bar holes. I had to use washers in order that the screw is secure against the grab bar.
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Great design, be prepared to drill a 3/4” hole in...
Great design, be prepared to drill a 3/4” hole in the wall to get these to push in, but they work as advertised! Once I replaced the old anchors which failed on us in our bathroom? I’m pretty sure I can now stand on the towel rack if I ever need to. Thanks Home Depot!
Was this helpful?
1
0
They will do the job but they have an overhang...
They will do the job but they have an overhang that shows beyond the grab bar mount cover - not a good esthetic and nothing can be done since that would expose the mount to water intrusion.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers