WM 49 - 9/16 in. x 3-5/8 in. Primed Finger-Jointed Crown Moulding
- Install where walls and ceilings meet or use to create mantels
- Smooth, primed surface can be painted to match your decor
- Can be combined with other moldings to create unique designs
- See More Details
Product Overview
The Woodgrain Millwork 9/16 in. x 3-5/8 in. WM 49 Prime Finger-Joint Crown Moulding is used where walls meet ceilings. Prime Finger-Joint WM 49 Crown Moulding is the best way to add interest to any room or space. Crown mouldings come in a variety of sizes and patterns and can be combined to create one of kind moulding buildups.
- Smooth, consistent surface is free from knots and is ready to finish
- Can be painted with any high quality latex based paint
- Installs with common woodworking tools
- Can be used to create mantels or cornices
- Spring angle - 51/39
- Note: product may vary by store
- California residents
Info & Guides
Product Overview
- Install where walls and ceilings meet or use to create mantels
- Smooth, primed surface can be painted to match your decor
- Can be combined with other moldings to create unique designs
Specifications
Dimensions
Product Depth (in.)
0.563
Product Length (in.)
192
Product Width (in.)
3.625
Details
Application
Ceiling
Color Family
White
Color/Finish
White
Finish Type
Primed
Installation Type
Nail
Interior/Exterior
Interior
Material
Wood
Moulding Features
No Additional Features
Moulding Type
Crown
Pattern Number
49
Pro Pack
No
Sell Pack Options
Single Item
Warranty / Certifications
Manufacturer Warranty
N/A
Questions & Answers
12Questions33Answers
If we pay at the store can we have delievered
Asked by Veronica January 24, 20212
AnswersYes
How much do i need for 100 ft
Asked by Terry April 13, 20201
Answer6 pieces at 16'0" long and a 8'0" piece
What is the actual height of this?
Asked by Danielle June 7, 20192
AnswersIt's 3-1/2 " high
Do they have pre fab corners for this moulding?
Asked by Bryan January 8, 20192
AnswersYes they do for inside and outside corners. I made my own using the leftover crown.
Is this product available in 9/16in x 4.25 inch??
Asked by Nate August 31, 20182
AnswersNot sure as I kept a consistent size.
How long is the board in total? I’m looking for a 16’ length
Asked by Momofnine February 25, 20185
Answersits sold by the foot, the longest is 16'
What kind of nail should I use? I have an 18 gauge nail gun that I've used for a chair rail but i...
Asked by Umbearto January 10, 20185
Answersuse 15g and nail into studs behind wall and ceiling ,if no studs available add a nailer or a support to nail into.
How much should i get to cover 20ft
Asked by Rick August 20, 20175
Answers22 feet
how much should I get to cover 160 feet
Asked by DD June 7, 20176
Answers10 sticks they come in 16 ft unless you have a lot of different areas to put in might get one more just in case so your not short or if you mess up
how much should i get to cover 54 ft?
Asked by milespercallan April 5, 20173
Answers16ft sticks you would need you would need 4 sticks total comes out to be total of 64 ft
Customer Reviews
Jan 15, 2019
Crown trim (pine) broke at joined point while installing 90” section and also when I picked up a ...
Crown trim (pine) broke at joined point while installing 90” section and also when I picked up a 16’ piece at the 58” mark. I have bought quite a bunch of trim from HD over the years, ant this is the first time I experienced this issue. Normally, a better quality product from HD..
by Carl
Mar 13, 2018
I used this product to match the existing crown moulding in my 20+ year old home (was not expecti...
I used this product to match the existing crown moulding in my 20+ year old home (was not expecting to find the match so easily!). I recommend the pre-cut corners if you are installing yourself, but we had a professional install the trim because I wanted a seamless look (we have some DIY crown moulding upstairs and I do not recommend tackling this project on yourself as it is very hard to hide the seam where two pieces meet).
I do recommend buying some basecap and adding that to beef up this standard molding. You can buy standard basecap for under $1/foot at your local Home Depot. Just install that basecap 2-3" underneath this crown moulding and then paint it all one color (including the wall in between). We used Behr Premium Plus Ultra Silky White (semi-gloss) and it came out great. Huge upgrade from just the 3" crown that the house came with!
by pgiorgi1
Related Products
Explore More on homedepot.com
Furniture
Home Decoration
More Products
Home and Kitchen Appliances
Outdoor Living
Tools and Hardware