#1 Home Improvement Retailer

Internet #205320434

Model #013621654

Store SKU #1000383731

Store SO SKU #1000055449

Lakeshore Pecan 1/2 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer Molding

  • Lamination resists fingerprints, stains, smudges, and tears
  • Ideal for use with wooden and concrete floorings
  • Easy to clean using a damp cloth
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Multipurpose Reducer is used to transition floors of unequal height from wood/laminate floors to carpet, vinyl or tile. This molding will provide a seamless look when transitioning between flooring surfaces. Coordinates with laminate flooring providing a beautiful finished look.
  • Lakeshore Pecan laminate multi-purpose reducer molding
  • 1/2 in. thickness x 1-3/4 in. width x 72 in. length
  • Item coordinates with 6 mm – 9 mm thick laminate flooring
  • Laminate moldings are extruded out of high-density fiberboard and wrapped with laminate decorative paper
  • Lakeshore Pecan light color smooth finish
  • Clean with a damp cloth
  • No attached underlayment
  • Appropriate grade for installation: above grade, on grade, or below grade
  • No painting or staining necessary
  • Can be installed over both concrete and wooden subfloors
  • Residential and commercial use
  • Warranty: 25-year residential use and 8-year commercial use
  • Don't forget your coordinating trim and moldings
  • All online orders for this item ship via parcel ground
  • May be a slight color variation due to the nature of the decor
  • Moldings are installed with a galvanized metal track, included with purchase, proudly manufactured by Zamma corporation
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Laminate Trim

current product
Lakeshore Pecan 1/2 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer Molding
Haley Oak 7/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate T-MoldingWinterton Oak/Sanibel Driftwood 5/8 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer MoldingDistressed Brown Hickory 7/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate T-Molding
BrandZammaZammaZammaZamma
NameLakeshore Pecan 1/2 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer MoldingHaley Oak 7/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate T-MoldingWinterton Oak/Sanibel Driftwood 5/8 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer MoldingDistressed Brown Hickory 7/16 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate T-Molding
Price
Ratings
(132)
(161)
(70)
(111)
Finish TypeSmoothSmoothSmoothSmooth
Product Length (in.)72727272
Flooring Product TypeLaminate Moulding/TrimLaminate Moulding/TrimLaminate Moulding/TrimLaminate Moulding/Trim
Laminate Flooring FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional Features
Flooring LookWood LookWood LookWood LookWood Look
LocationBasement,Bathroom,Kitchen,Mudroom,SunroomBasement,Bathroom,Kitchen,Mudroom,SunroomBasement,Bathroom,Kitchen,Mudroom,SunroomBasement,Bathroom,Kitchen,Mudroom,Sunroom
GlossLow GlossLow GlossLow GlossLow Gloss
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Length (in.)
72
Product Thickness (mm)
12.7
Product Width (in.)
1.75 in
Width (in) x Length (in)
1.75in x 72

Details

Color Family
Tan
Color/Finish
Lakeshore Pecan
Finish Type
Smooth
Flooring Look
Wood Look
Flooring Product Type
Laminate Moulding/Trim
Gloss
Low Gloss
Indoor/Outdoor
Indoor
Laminate Flooring Features
No Additional Features
Location
Basement,Bathroom,Kitchen,Mudroom,Sunroom
Material
Laminate
Returnable
90-Day

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
25 Year Residential, 8 Year Commercial

Questions & Answers

10Questions14Answers

I need to go from a 12mm floor to an 8 mm floor. Will this work?

Asked by Paula November 10, 2020
1
Answer

I have not used this product for this purpose but because it's labeled a reducer, I would assume it could work. Be advised this trim should not be used for a high traffic area as it is a very thin finish over another substrate. If you have a high traffic area, I would get oak trim and stain it to match the laminate. I did that and it looks great. Home Depot has a large selection of trim.

Can you add multiple together to span a longer seam?

Asked by Eric December 24, 2019
0
Answers

What size are the screws? I want to ensure we buy the correct size concrete drill bit.

Asked by Bluffton July 22, 2019
2
Answers

The included screws are about a #6 and about 1 inch long. If you're installing directly on a concrete slab, you'll need to drill into the floor slats and into the concrete for these screws to actually fit. It might be recommended to replace these screws with shorter screws to avoid having to drill into your concrete slab. If not, the included screws will raise the flooring of the slab due to their length.

My height difference is greater than 5/16. Is there one that can accommodate this?

Asked by Mussdog August 12, 2018
1
Answer

No, but you can build up the height with more of the under padding.

How many of this zamma lakeshore pecan i need to purchase for 1400 sqft?

Asked by Bcrealtor2012 June 21, 2017
2
Answers

It depends on the areas that need transition. This is a board foot product, you buys as many as you need that covers the footage of the transition areas

Does this come in longer length? I need one that is 120"

Asked by Michelle August 25, 2016
2
Answers

Not to my knowledge. For longer areas, you may have to put several together. Be advised I wouldn't recommend this product for high traffic areas as it's a thin veneer over another substrate. You're better off getting oskbtrim and staining to match.

Is there an End molding that matches the Lakeshore Pecan flooring.

Asked by tglock July 14, 2016
2
Answers

There's a T Molding that matches it. It cost about $22

What molding is made for a stair nosing?

Asked by Jason December 14, 2015
2
Answers

There is a special piece made specifically for stairs, bullnose. Make sure and layout your pieces before permanently attaching as the measurements should be precise.

tracking

Asked by pete November 20, 2015
1
Answer

it comes with the track.

Cut to length

Asked by Jro September 30, 2015
1
Answer

Yes. Any saw should do, though a chop saw or circular saw will be easiest.

Lakeshore Pecan 1/2 in. Thick x 1-3/4 in. Wide x 72 in. Length Laminate Multi-Purpose Reducer Molding - page 2

Customer Reviews

  • 4.2
    out of 133 reviews
  • 88% recommend this product
Filter by:
Showing 1-10 of 133 reviews
Good product IF you’re careful!
Bought this to transition from linoleum to the matched flooring. First attempt I broke the piece due to user malfunction (fortunately I didn’t need the test so I simply remade the piece). The reason it broke was I didn’t align the groove with the metal track properly and slightly bent the track. Make sure you align the groove on the lower edge! To the manufacturer: directions indicating this possibility would be good to include. Final product looks great
by Gmdropp
Went together perfect and matches just as perfect as the...
Went together perfect and matches just as perfect as the floor! Best match ever, this my thrid house and the will be the one I will buy forever!
by Flooring101
Wayyyyyy too expensive
It’s a decent product, it does what it’s supposed to do, looks nice, but it is way too much money for what it is, the laminate that it matches is so affordable and then you have this which is kind of a rip off.
by Jupes
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Product good. Easy to cut for precision
Product good. Easy to cut for precision
by Lilbit
Perfect. Flooring was from another store, this transition strip not only matched great but was ea...
Perfect. Flooring was from another store, this transition strip not only matched great but was easy to install. Only comes with 3 screws for an 8 foot piece, otherwise would be 5 stars. Word of advice, it fits tight (as it should) so use a rubber mallet and start with one side, then work across to the other end. You have to hit it fairly firm, that’s why you should use a rubber mallet.
by PS40RN
2 people found this helpful
I used this reducer to go between the laminate flooring and some linoleum. I only needed about 30...
I used this reducer to go between the laminate flooring and some linoleum. I only needed about 30” of the 72” so, I guess I have some extra for next time. It would be nice of they sold it in 36” sticks. The metal piece was easy to cut with tin snips and the molding was easily cut in my chop saw. One thing to make sure is to verify that the metal piece is not bent before installation. That way the molding snaps in and holds. Other than having to purchase twice what I need, this molding works well. It installed relatively easily, is solid and feels good when stepping on it.
by Roadrunner
We're extremely happy with the initial look and quality of these transitions. We skipped the incl...
We're extremely happy with the initial look and quality of these transitions. We skipped the included metal U channels and just used a clear silicone to adhere the boards to the flooring. Allowed 24 hours with weights resting on the strips, while silicone cured. Positioned weights every 18". Worked beautifully!
by Chris
Fits and looks great.
Fits and looks great.
by JOE
If you are installing the lakeshore pecan laminate flooring, it is crucial that you finish the in...
If you are installing the lakeshore pecan laminate flooring, it is crucial that you finish the installation with these correct mouldings. Easy to install, fit and finish are superb.
by Workingtoomuch7720
Showing 1-10 of 133 reviews