Internet #301076109

Model #0157223675

Store SKU #1002593647

Trail Oak/Georgia Clay 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-Molding

Frequently Bought Together

+
+
Price:
$2308

Product Overview

T-Molding is used to transition two floors of the same height typically installed between rooms or in entryways. This molding will provide a seamless look when transitioning between flooring surfaces and in doorways. Providing a beautiful finished look to any room in your home.
  • Trail Oak/Georgia Clay Vinyl Molding
  • 1/3 in. thickness x 1-3/4 in. width x 72 in. length
  • Item coordinates with 6 mm - 10 mm thick vinyl flooring
  • Trail Oak/Georgia Clay Medium color finish
  • Appropriate grade for installation: Above grade, On grade or Below grade
  • Can be installed over both concrete and wooden subfloors
  • Residential and commercial use
  • Clean with a damp cloth
  • Vinyl Moldings are extruded out of 100% PVC and wrapped with the same decorative vinyl as the floor
  • PVC Wearlayer
  • There may be a slight color variation due to the nature of the decor
  • All online orders for this item ship via parcel ground and may arrive in multiple boxes
  • Moldings are installed with a galvanized metal track, included in package
  • Proudly manufactured by Zamma Corporation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Vinyl Trim

current product
Trail Oak/Georgia Clay 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-Molding
Walton Oak 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-MoldingSeasoned Wood/Harrison Pine Dark/Augusta Wood 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-MoldingShadow Hickory 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-Molding
BrandZammaZammaZammaZamma
NameTrail Oak/Georgia Clay 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-MoldingWalton Oak 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-MoldingSeasoned Wood/Harrison Pine Dark/Augusta Wood 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-MoldingShadow Hickory 1/3 in. Thick x 1-3/4 in. Wide x 72 in. Length Vinyl T-Molding
Price
$2308
$2308
$2308
$2308
Ratings
(97)
(88)
(111)
(56)
Flooring Product TypeVinyl Moulding/ TrimVinyl Moulding/ TrimVinyl Moulding/ TrimVinyl Moulding/ Trim
Water ProtectionWater ResistantWater ResistantWater ResistantWater Resistant
Flooring LookWood LookWood LookWood LookWood Look
Product Thickness (mm)8.478.478.478.47
FeaturesMark ResistantMark ResistantMark ResistantMark Resistant
MaterialVinylVinylVinylVinyl
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Length (in.)
72
Product Thickness (mm)
8.47
Product Width (in.)
1.75 in
Std Tst Mthd-Static Ld Lmt (lb./sq. in.)
195
Width (in) x Length (in)
1.75in x 72

Details

Color Family
Brown
Color/Finish
Trail Oak/Georgia Clay
Features
Mark Resistant
Flooring Look
Wood Look
Flooring Product Type
Vinyl Moulding/ Trim
Indoor/Outdoor
Indoor/Outdoor
Material
Vinyl
Product Weight (lb.)
1.2
Returnable
180-Day
Water Protection
Water Resistant

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
25 Year Residential, 8 Year Commercial

Questions & Answers

5Questions9Answers

How do you recommend attaching the narrow track to concrete?

Asked by DallasNeal November 3, 2020
1
Answer

You will have to secure the T track to the concrete using fasteners. I have used Tapcons which are heavy screws designed specifically for concrete applications. A concrete drill bit is provided to drill a pilot hole. These are strong screws and I am not sure if a size under 3/16” diameter which may be slightly larger than the the track hole which is probably 1/8” so drill thru the track. The other option is a concrete anchor with a screw to hold down the T track. These screws are smaller in diameter and you will probably have to purchase a concrete drill bit as standard drill bits tips just get ground down. You can use the wood screws that come with the T track to size the anchor you need. You will install several anchors and screws in the track so this is a good secure option. The quality of the concrete floor will also determine the type of concrete fastener as if concrete is brittle I would go with Tapcon. If concrete is smooth go with the anchor and screw. REMEMBER the people who work the flooring department are also experienced installing T track and flooring and the best source for recommendations. I attached photos of Tapcons and anchors with screws. Good luck.

Is the track supplied with the T-Molding, or does it need to be purchased separately?

Asked by mart October 23, 2020
1
Answer

The track and screws are included with the T-Molding. The channel is segmented so easy to snap apart for your length. The length of the channel does not have to be the same length as the T-Molding. Snaps right into the channel and read instructions first. Good luck and pretty nice product.

Can this be purchased in longer strips? I need 78" piece.

Asked by Mark September 25, 2019
1
Answer

Not to my knowledge. I worked in the flooring dept. at Home Depot a couple of years ago and NEVER seen any transition strip longer then 72". Not even thru special order.

Will this product be available again or has it been discontinued?

Asked by Kris October 4, 2017
3
Answers

Yes it is still available

How wide is the track that the threshold molding snaps into?

Asked by Jen June 10, 2017
3
Answers

9/16. I measured a piece I had left over. You would do better to have at least a 5/8 gap to place the strip in.

Customer Reviews

  • 97 Customer Reviews
  • 4.5 out of 5 stars overall
96% of customers recommended.
Overall Ratings
5star-icon(64)
4star-icon(21)
3star-icon(6)
2star-icon(4)
1star-icon(2)
Sort By:
Used this transition molding for my new vinyl plank flooring (Trail Oak) for my tile flooring. Th...
Used this transition molding for my new vinyl plank flooring (Trail Oak) for my tile flooring. The vinyl flooring was the same thickness as my tile. An excellent fit. I had to drill my own holes into the slab.
Was this helpful?
0
0
Perfect color match to the vinyl flooring.
Perfect color match to the vinyl flooring.
Was this helpful?
0
0
This flooring is amazing, it is beautiful, I would highly recommend this flooring to everyone, ...
This flooring is amazing, it is beautiful, I would highly recommend this flooring to everyone, it's very quiet when you walk on it, if I had the funds I would install this flooring throughout my house, I just love it
Was this helpful?
0
0
Good quality easy to use.
Good quality easy to use.
Was this helpful?
0
0
Worked perfectly and easy to install...
Worked perfectly and easy to install
Was this helpful?
0
0
Product is good, flooring to molding is good. Problem is you buy the floor at your local Home De...
Product is good, flooring to molding is good. Problem is you buy the floor at your local Home Depot, they do not have the moldings. Told they cannot order molding you have to go get yourself. Had to drive 1 hour to get 1 piece of molding, that all the store had. Thank goodness a friend that I work with was going to Knoxville, TN. He bought 3 more pieces of this molding. Spend over $2400.00 on flooring, but no molding and no customer service from Home Depot. So if buying, make sure store has your moldings.
Was this helpful?
0
0
It matched the Trail Oak flooring perfectly. It was used...
It matched the Trail Oak flooring perfectly. It was used to connect the tile floor in laundry to the Trail Oak in hallway.
Was this helpful?
0
0
Great product. Looks like real wood. You cannot tell the difference unless you get to within inc...
Great product. Looks like real wood. You cannot tell the difference unless you get to within inches of it. While it varies from piece to piece, mine has lots of knots and wood grain patterns. It locked in nice and tight. I had composite molding before and consider this to be much better.
Was this helpful?
0
0
Was this helpful?
0
0
Great product. Needed to trim around a rectangular tile area....
Great product. Needed to trim around a rectangular tile area. It came out great, but was challenging as I needed to cut perfect 45 degree angles and have them meet perfectly. Somehow it worked out. Looks great- just be very careful if you need to do this!
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers