Questions and Answers for 1 in. x 20 in. x 4 ft. S4S Laminated Spruce Panel Board

A:  Yes.sands easily,.this board is warp resistant, light weight, perfectly squared, takes finish great, strong and a pleasure to work with. far superior to solid pine for most applications.

A:  yes

A:  The problem is the inconsistent measurements, specifications and information. The 1 x 20" and the 21/32" x 24" both show the same thickness dimensions. 0.656.... 21/32" is really 0.656, but a 1", nominal or not, is quite wrong to be the same thickness.

A:  No.

A:  a very good 'rule of thumb' . if it is more then 11.5 inches wide .. it is many pieces glued together ! this is NOT always bad as many times this 'CAN' be stronger as well as less impurities in the finish ! I use this type of pre-made sizes because it would take me an extra day or more to make my own this size by cutting and gluing and clamping. then trimming and sanding to get the same results. if you go to buy this type , be sure to check both sides as well as the edges for dings of knot holes .

A:  .666" not 1"

A:  I am building a 'add-on' desk/shelf for a friend this week end and using one of this size and one 72" long. Neither have the sizes they are posted as !!!!!!! it is raining now so I am not able to go out to put an exact size on it ( or either of them ) but it is less then 3/4" thick as well as less in width ... length is very close to correct ! yes a surprise to me ! I hope this helps You .

A:  No, there is not.

A:  Each board weighs approximately 11.3lbs