Questions and Answers for 23/32 in. x 4 ft. x 8 ft. RTD Sheathing Syp

A:  yes they offer home delivered service,also you rent truck if you was it right way.Tyler you can go on line at home depot.com and order that way they will give the best product they can because they want you back as a repeat customer This will save time and money Just give them call for more information.

A:  Yes you can and then go to customer service to set up your date and time of delivery.

A:  call the store,l am sure you can. l never did.

A:  HI, yes you can rent a truck from home depot or have it delivered, depending on what services your local store has to offer, please check with your local stores pros desk to find out what they offer.

A:  Just rent there pickup.

A:  I was told that they would make up to 3 cuts on each sheet of plywood Purchased.

A:  Home Depot at my local store has a saw for Customers. An Associate will cut. Check with yours. Hope this helps.

A:  Yes

A:  Yes I have seen the store cut sheets for other people. I do not know if there is a charge.

A:  Yes. They were great help cutting it to exactly what I needed.

A:  JR, Thank you for your interest in Georgia-Pacific's rated sheathing. This product is not self spacing. Please leave a 1/8" gap to allow for expansion.

A:  No

A:  yep just put it where you want it and nail or screw it into place.

A:  JR This is a question fory our local Home depot store they`ll be glad to help you with that question.

A:  It is the proper thickest but it is not exterior rated. I assume from your description "patio roof" that it will be exposed to the elements. Therefore I would only use exterior rated materials.

A:  Yes you would need to seal it but yes would be fine

A:  Shelli, My neighbor and I used the 4ft x 8ft sheets for my flooring. Your asking if it can be used on the outside. I would suggest that you the lumber dept. and for a manager for the right answer.

A:  Yes. If you are going to shingle keep the same thickness but drop down one grade as you do not need one side finished.

A:  This product is classified as Exposure 1, which means it can be exposed to the elements for a while but not permanently. Most patio roofs are permanently exposed to the elements, for this reason, we do not recommend Rated Sheathing.

A:  This sheathing could be used as decking (sheathing) but you would have to put roofing felt and shingles or metal on top.

A:  This product is manufactured with Southern Yellow Pine.

A:  the kind that comes from trees. syp is pine.

A:  Pine

A:  Glulam timber is used in this plywood.

A:  This plywood is made from Yellow pine.

A:  syp is southern yellow pine. RTD sheathing is exterior rated

A:  Southern Yellow Pine

A:  Southern Yellow Pine Plywood Sheathing

A:  Southern Yellow Pine (SYP)

A:  The plywood is intended to be used as sheathing, "syp" indicates Southern Yellow Pine.

A:  HI, yes your local home depot will be happy to cut the wood for you.

A:  When you buy a sheet of plywood Home Depot will make up to 3 cuts in that sheet without additional charge.

A:  Yes. The sheet I got needed to be 23 3/4" x 7 ft. They cut it for me for no charge!

A:  Home Depot can cut most lumber they sell to your cut requirements.

A:  23"/32" is best for general construction!

A:  If you're cutting it up for window boarding, you could only use the pieces to patch a roof. What are you going to do with a bunch of 2' x 4' pieces of wood? Sheath a house? Assume these pieces of sheathing will be used for small projects and buy accordingly.

A:  23/32" is generally more useful for general home repairs.

A:  I would get the 23/32

A:  My experience has been that the 23/32" plywood is more useful to have around than other sizes.

A:  unlikely.

A:  I believe they will but once it's cut you owe it and it can't be returned. I would recommend that you call the manager on this first.

A:  yes. give good cut dimensions though.

A:  yes they will.

A:  I would call your local home depot store they`ll be glad to help you with that question.

A:  As long as you incorporate it on top of a support structure. You need to build a 2x3 or 2x4 support under the top. .

A:  It would be great for that. It has one "good" side with virtually no knot holes (I had to fill one). Put the other side down and you will be fine. 3/4" thickness is plenty strong for a bench top.

A:  yes, it would be heavy enough for that

A:  This would be suitable for a work bench. It is not sanded, thus not smooth but sturdy.

A:  yes it would.