#1 Home Improvement Retailer

Questions and Answers for American Standard Manual FloWise 1.28 GPF Exposed Toilet Flush Valve in Polished Chrome for 1.5 in. Top Spud Bowls

Internet #205445345

Model #6047122.002

Store SKU #1000415196

  • Equipped with integral wiper spring to prevent clogging
  • Piston operation enhances the flush accuracy
  • Features a positive seal for leak-free performance

Questions & Answers

11Questions
caret
Q:What is the distance from the center of the water supply to the critical level mark on the tailpiece? I wanted to see how much play there is for the water supply stubout.
by|Apr 3, 2023
1 Answer
Answer This Question

A:  Hello, Thank you for reaching out to American Standard. I apologize, that is not a measurement that we have. Please contact us at 1-855-815-0004 and an American Standard Consumer Connection Advisor will be happy to assist you. We are available Monday - Friday between 8AM - 7PM ET and Saturday, 10AM - 4PM ET. Sincerely, Your American Standard Consumer Connection Team

by|Apr 6, 2023
    caret
    Q:can the pressure on this valve be reduced ? when flushed the water spills out over the rim. this stool is a small one such as one would find in a day care.
    by|Dec 14, 2022
    1 Answer
    Answer This Question

    A:  Hello, Thank you for reaching out to American Standard. I’m sorry to hear of the issue you have had with your American Standard product. Please contact our Commercial department at 1-855-752-9259 and an American Standard Consumer Connection Advisor will be happy to assist you. We are available Monday - Friday between 8AM - 7PM ET and Saturday, 10AM - 4PM ET. Sincerely, Your American Standard Consumer Connection Team

    by|Dec 21, 2022
      caret
      Q:We have (6) 604721 valves installed and have not had a problem until now. Currently one of these valves needs 3-4 flushes to properly clear the bowl. We have tried adjusting the set screw on the supply stop, but this has not corrected the problem.
      by|May 30, 2019
      1 Answer
      Answer This Question

      A:  jab, it would be best to call into American Standard directly, there are various trouble shooting steps we could go over, that would require us to speak in person.

      by|Jun 4, 2019
        caret
        Q:Does American Standard offer a tool to remove the standard adjustable tailpiece (M962920-0020A) on the 6047.121.002 flush valve for replacement by a longer tailpiece (M962834-0020A)? Please advise. Thank you.
        by|Jun 26, 2018
        1 Answer
        Answer This Question

        A:  Dear Malcolm, Generally, we would recommend using an adjustable wrench to remove the adjustable tailpiece. Sincerely, AS Customer Care Tech Team

        by|Mar 23, 2023
          caret
          Q:We have 8 of these valves installed and the client is complaining that it takes two flushes to clean the bowl. Is there a recommended time to hold the flush valve open on each flush?
          by|Aug 18, 2016
          1 Answer
          Answer This Question

          A:  The handle can not be held down longer to increase the flush cycle. You can try swapping the piston assembly inside the valve to a larger gpf to see if that helps. For other issues or questions, we recommend contacting our Sensor Tech line @ 1-855-752-9259.

          by|Feb 8, 2018
            caret
            Q:Can we perform a pressure test to 150psig on the water supply after installing the flushvalve with the angle valve closed to prevent damage to the diaphragm of the flush valve which only resists 125 PSIG?
            by|May 2, 2016
            1 Answer
            Answer This Question

            A:  Yes, as long as the angle stop is closed on each valve.

            by|Mar 23, 2023
              caret
              Q:I have installed 30 of these valves and all of them hammer? seems like the piston are defective?
              by|Aug 14, 2013
              1 Answer
              Answer This Question

              A:  You will need to contact customer service at 1-800-442-1902 for trouble shooting.

              by|Mar 23, 2023
                caret
                Q:Is there a minimum pressure required to fully close the flush valve? Will a flush valve fail open under low pressure?
                by|May 2, 2013
                1 Answer
                Answer This Question

                A:  The minimum operating pressure for this manual flushvalve is 25 PSI flowing. It is possible the flushvalve will continue to run if the flowing pressure drops below 25 PSI.

                by|Feb 8, 2018

                  Frequently Bought Together

                  +
                  +
                  Price:
                  $150.80