Questions and Answers for BEHR PREMIUM 1 gal. #S200-4 Chestnut Bisque Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi Susan, thank you for reaching out. Our Concrete & Garage 1-Part Epoxy Coating is a stand-alone coating that does not require a topcoat sealer. However, it can be topcoated with a sealer like our Wet-Look and Low-Lustre Sealer for enhanced durability. For a color similar to oak, I recommend checking out Sonoma Shade PFC-G-18 and Gathering Place PFC-G-24. Have a great day! -Lina

A:  Hi John, thank you for your question. As it turns out, we do not recommend applying thick coats of our Concrete & Garage 1-Part Epoxy Coating. That can impact the drying of the coating and cause the coating to fail. For the best results, I advise following the recommended spread rate. The epoxy should cover 300-500 sq. ft. per gallon. Have a great day! -Lina

A:  Hi Darrell, thanks for your question. Our Concrete & Garage 1-Part Epoxy Coating is designed to provide a washable finish to help with the maintenance of the surface. You can use a mild detergent to clean the surface, and it can also be swept. Have a great day! -Lina

A:  Hi bobt, thank you for your question. Although the 1-Part Epoxy is weather resistant, it doesn't provide a waterproof barrier and instead allows moisture to pass through the coating, making it a breathable film. Have a great day! - Randy

A:  Hi Nadine, thank you for your question. Yes, decorative flakes can be applied on top of the final coat of 1-Part Epoxy. Have a great day! - Randy

A:  Hi Rbh1, thank you for your question. You can use Granite Grip over the 1-Part Epoxy. The surface should be sound, clean, dry, and scuff sanded to promote adhesion. Good luck with your project! -Giovanna

A:  Hi John, thank you for your question. We recommend waiting 30 days before rinsing or cleaning, and using a mild detergent as needed. Please reach out to us directly if you have any other questions. Have a great day! -Giovanna

A:  Hi there, thank you for your question. I'm sorry to hear that you didn't get good coverage. Each gallon of the 1-Part Epoxy covers between 300-500 sq. ft., depending on the texture and porosity of the surface. The 5-gallon bucket should cover between 1500-2500 sq. ft. Please reach out to us directly for further assistance. Our Customer Care team is happy to help! -Giovanna