Questions and Answers for BEHR PREMIUM 1 gal. #S200-4 Chestnut Bisque Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hello, thank you for your question. Our most similar color to the image of the tan color being used on the label is Tan PFC-23. Have a great day! -Lina

A:  Hi Rojo, thank you for your question. As it turns out, our products are not designed or intended to be submerged underwater. With that in mind, we do not recommend using our products for the inside of your concrete basement sink. Have a great day! -Lina

A:  Hi James, thank you for your question. Ideally, you'll want to apply the 1-Part Epoxy, 4 hours after applying the Bonding Primer. Have a great day! -Giovanna

A:  Hi Roger, thank you for your question. We recommend etching any concrete that is not rough or porous. You can test your concrete to see if it needs to be etched by sprinkling water over a few spots. If the water is absorbed rapidly, you do not need to etch. However, if the water puddles, then etching is required. The concrete should feel like 150-grit sandpaper when ready. Have a great day! -Giovanna

A:  Hi None, thank you for your question. Our 1-Part Epoxy Paint is designed for residential use. For a commercial kitchen floor, we recommend looking into a commercial-grade floor coating. Have a great day! -Giovanna

A:  Hi Ryan, thank you for your question. We do not recommend the 1-Part Epoxy Concrete and Garage Floor Paint on plywood. As it turns out, we do not have any coatings to recommend for a plywood floor. Have a great day! -Giovanna

A:  Hi there, thank you for your question. We do not have any products to recommend before installing tiles. I suggest checking with the manufacturer of the tiles for their recommendation on the right product to use. Have a great day! -Giovanna

A:  Hi Terri, thanks for the question. You can apply the Wet-Look Sealer after 4 hours, but the 1-Part Epoxy should have at least 24 hours of dry time before it is walked on. Have a great day! -Ronald

A:  Hi Bobby, thank you for your question. Our 1-Part Epoxy is recommended for residential use. If your wood shop does not get high traffic, this product would work. Good luck with your project! -Giovanna

A:  Hi Tyler, thanks for reaching out. Please contact our Customer Care team directly through our website for more help. You can call, email, or chat for assistance with your question. Hope to hear from you soon! -Christina