Questions and Answers for BEHR PREMIUM 1 gal. #S200-4 Chestnut Bisque Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi Georgie, thanks for the question. You only need to apply 1 coat of the Low Lustre Sealer to seal the surface, but you can apply up to a total of 4 coats if desired. Have a great day! -Ronald

A:  Hi Diosdado, thanks for the question. Our Concrete & Garage 1-Part Epoxy Floor Paint can be used on brick, but it isn't recommended to be used on vertical surfaces. Have a great day! -Ronald

A:  Hi marty, thanks for your question. It's important to wait at least 7 days before driving on the coating. Have a great day! -Christina

A:  Hi KL54, thanks for your question. We do not recommend adding sand to our 1-Part Epoxy, as this could affect the performance of the paint. Instead, you can use our Anti-Slip Floor Finish Additive if you need a slip-resistant finish for your project. Have a great day! -Christina

A:  Hi Georgie, thanks for your question. Yes, we recommend scuff sanding glossy surfaces before applying our 1-Part Epoxy Concrete & Garage Floor Paint. Have a great day! -Christina

A:  Hi store0358, thank you for your question. Our 1-part Epoxy Paint is not designed for wood; it is specifically designed for a concrete floor coating, which is why we do not recommend it on wood. If you need further assistance, please reach out to our customer care team directly; they are always happy to help! -Alex

A:  Hi Curtis, thanks for the question. Our Concrete & Garage 1-Part Epoxy isn't recommended to be used on wood. Have a great day! -Ronald

A:  Hi Stev, thank you for your question. The 1-Part Epoxy Concrete & Garage Floor Paint isn't recommended for wood surfaces. Instead, it's best to use one of our wood coatings. Have a great day! - Randy

A:  Hi Felicity, thanks for your question. To prepare the surface, you'll need to scuff sand and clean with a concrete cleaner/degreaser. Once dry, You can go ahead and reapply our 1-Part Epoxy. Good luck with your project! -Christina

A:  Hi jack, thank you for your question. As it turns out, we do not recommend using our 1-Part Epoxy on a vertical surface, such as a foundation wall; this product is only designed for horizontal (floor) surfaces. Instead, it's best to use one of our wall paints. Please reach out to our customer care team directly for further assistance; they will be happy to help provide product suggestions for your project type. Have a great day! -Alex