Questions and Answers for BEHR PREMIUM 1 gal. #S200-4 Chestnut Bisque Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi Stev, thank you for your question. The 1-Part Epoxy Concrete & Garage Floor Paint isn't recommended for wood surfaces. Instead, it's best to use one of our wood coatings. Have a great day! - Randy

A:  Hi Felicity, thanks for your question. To prepare the surface, you'll need to scuff sand and clean with a concrete cleaner/degreaser. Once dry, You can go ahead and reapply our 1-Part Epoxy. Good luck with your project! -Christina

A:  Hi jack, thank you for your question. As it turns out, we do not recommend using our 1-Part Epoxy on a vertical surface, such as a foundation wall; this product is only designed for horizontal (floor) surfaces. Instead, it's best to use one of our wall paints. Please reach out to our customer care team directly for further assistance; they will be happy to help provide product suggestions for your project type. Have a great day! -Alex

A:  Hi Ellen. thanks for the question. After the Concrete & Garage 1-Part Epoxy has cured (in about 30 days) it can be cleaned with a pressure washer. You can also use a concrete cleaner/degreaser. Have a great day! -Ronald

A:  Hi Jozie, thanks for the question. You can stencil over the Concrete & Garage 1-part Epoxy with another water-based/acrylic paint. Have a great day! -Ronald

A:  Hi Arturo, thanks for the question. You can use out Concrete & Garage 1-Part Epoxy for painting curbs. Have a great day! -Ronald

A:  Hi John, thank you for your question. The 1-Part Epoxy Concrete and Garage Floor Paint covers 300-500 square feet per gallon. Have a great day! - Randy

A:  Hi paddy, thank you for your question. We recommend allowing the first coat to dry for at least 4-6 hours. It is okay to wait longer if needed. Just make sure that the surface is clean and dry before applying the second coat. Have a great day! -Giovanna

A:  Hi Miki, thanks for the question. Applying a sealer over the Concrete & Garage 1-Part Epoxy is optional, and the paint will dry to a hard durable finish. Have a great day! -Ronald

A:  Hi Christopher, thank you for your question. We recommend using an airless sprayer with a .015-.021" tip and 60 mesh filter. Good luck with your project! -Giovanna