Questions and Answers for Broan-NuTone Easy to Install 80 CFM Ceiling Bathroom Exhaust Fan with LED Clean Cover, ENERGY STAR

A:  Hi Tony, Thank you for your question on model AERN80LK. This would not be a recommended replacement for your model as it does have a lower CFM rating. the suggested replacement would be model AE110LK. This is based on performance only as the unit does have a different housing.

A:  Hi EWesner, Thank you for your question on the model AERN80LK model. Yes, the MS100W occupancy sensor is compatible with this fan.

A:  Hi Mike, Thank you for your question on model AERN80LK. Unfortunately, there is no direct replacement for the QT110N unit. The suggested replacement is model AEN110. This is based on performance only as this unit does have a different housing.

A:  Hi Brian, Thank you for your question on model AERN80LK. While this unit is dimmable, it may not be compatible with all dimmer controls. Each application is unique and various factors such as load, common neutrals or other electrical products on the circuit can, in certain instances, cause variance in system performance. We do not manufacture dimmer controls and as that is an ever changing market, we do not test our units with the products of other manufacturers. We cannot provide a recommendation for a replacement. Here is a link to our Dimmer Switch Selection guide to assist you further: https://www.broan-nutone.com/getmedia/dfcd39a4-7d24-4fc1-bd30-44d728a3a233/Compatible_Dimmer_Controls.pdf?ext=.pdf Please call our Technical Support at 888-336-6151 for additional assistance.

A:  Hi Sandeep, Thank you for your question on model AERN80LK. The replacement Grille Assembly for this model is part number 1100748. You can special order this part through Home Depot. However, this unit has a 3 year warranty from date of purchase that would cover the grille assembly. If you are within that time frame, please call our Technical Support Team at 888-336-6151 so that we can gather your personal information and send you a replacement part.

A:  Hi FreddyTheFrog, Thank you for your question on the AERN80LK model. A wall switch is not included with the purchase of the ventilation fan. You can wire the unit so the fan and light operate independently or together.

A:  My fan was wired to 2 switches one for light and one for fan because I replaced an existing fan that was wired that way. Dont know if its possible to use only one switch. I prefer that each switch operating separately. Wall switches are not included with fan.

A:  Not sure if it is possible to wire the fan and the light to work separately, but the instructions are for turning them on/off together with a single pole switch, not included.

A:  Hi Flanges, Thank you for your question on model ARN110LKVV. This would depend on your installation application. Please call our Technical Support Team at 800-637-1453 for assistance.

A:  Just an ordinary wall switch. Easy to have two switches if remodeling or in a new house. One power feed to both switches, one switch leg to the fan, one for the light. No extra switch needed to switch from white light to UV light. Just flip the light switch off and on quickly to activate the blue UV light. You can just have one switch to power both the fan and light/s, but I prefer to have them separate, which requires two switches. If this is confusing, I humbly suggest getting an electrician to assist. Good luck.

A:  Hi Harley, Thank you for your question on model ARN110LKVV. We would need additional information to provide accurate assistance. Please call our Technical Support Team at 888-336-6151 for assistance.

A:  Bro it’s a fan… it costs about 5 cents per day to run a fan for 24 hours straight I don’t think they make “energy star” fans lol 

A:  Hi Boii, Thank you for your question on model ARN110LKVV. Unfortunately, this model is not Energy star certified.

A:  Hi Gigi, Thank you for your question on the AERN80LK model. This model is a fan and light only. It does not offer any type of humidity or motion sensing feature. We would recommend that you recheck your model number and contact Technical Support directly for more assistance at 888-336-6151.